Evacuator solves sewage problems.
Designed to facilitate movement of solids in Waste Water Lift Station/Wet Weels, The Pit Evacuator eliminates need to clean stations by vac truck and prevents employees from coming in contact with raw sewage. Unit attaches to pump discharge lines, and creates vacuum to pull grease and floating solids through venturi. Mixture is discharged into bottom of pit, forcing sand and grit to be mixed so...
Read More »
PCB Packaging Hardware is lead-free.
Offered in 571+ different styles and sizes, line of snap-in and vertical, standard-mount card guides accommodate 1/16, 3/32, or 1/8 in. PCBs and are manufactured in compliance with WEEE and RoHS Pb-free materials and processes. Offered in 31 styles, VERT-O-GIDE(TM) offers 2-channel vertical guide for 1/16 in. PCBs. Line also includes CARD-O-PULL(TM) PCB ejectors, inserter/extractors, PCB handles...
Read More »Teflon®-Coated Ejectors help prevent clogging.
Used throughout edible oil industry for refining and processing vegetable oils and flavorings, CR Ejectors operate without moving parts and seldom require maintenance. Teflon applied to nozzle holders stops degradation caused by soybean oil collecting at ejector nozzles.
Read More »
Two-Stage Ejectors offer cut-to-length adaptability.
Hardened-Steel, Two-Stage Ejectors offer Bottom Last and Top Last styles in 20, 26, and 32 mm diameters. They control sequence of movement of 2 sets of ejector plate assemblies inside mold's ejector box. Both first stage and second stage strokes can be set independently. Once ejector system is installed, fixed strokes cannot be tampered with or accidentally modified. Latching mechanism eases...
Read More »
Managing the New FGD Wastewater Regulations
A guide for managing Flue Gas Desulfurization wastewater using leading technologies.
Read More »
Locking Ejectors suit cPCI enclosures and buss systems.
Surface geometry of Gen II cPCI-E3(TM) Locking Ejectors eliminates potential for unintentional tripping of hot-swap switch associated with PICMG 2.0+ circuitry interfaces of peripherals engaged in cPCI enclosures. Units include positive audible and tactile click when ejector is engaged or locked. Secure engagement is assured by force rating of over 60 lb, while red Norel(TM) push-button...
Read More »
Blowoff Air System dries, cleans, and cools.
Super Air Wipe(TM) ejects compressed air through thin slotted nozzle that pulls in high volumes of surrounding room air. Airflow produced delivers 360° airstream with velocity variable from blast to breeze using instant on/off control. Made of aluminum, it is available in 2 and 4 in. throat dia. Applications include drying inks, paint, and screen printing; cooling hot extruded shapes; and...
Read More »
Ejectors and Core Pins are hardened for end work.
M-2 Thru-Hardened ejectors and core pins are uniformly hardened to Rc 60-63 and can be ground without loss of Rockwell hardness to permit detailed end work and prevent dishing. Ready for mold insertion, they are offered in decimal diameters and 0.0001 increments. Available in straight and stepped diameters ranging from 0.0312-0.2500 in. with 0.0003 in. tolerance, they come in 6 and 8 in. overall...
Read More »
Articulated Truck offers self-cleaning ejector.
Model 740 Ejector Articulated Truck features mechanism that allows material to be spread and dumped on-the-go, without raising body. It is rated at 42 tons and produces net power of 415 hp. Reinforced ejector body is made from high-yield, heat-treated steel. Truck is powered by Cat 3406E ATAAC turbocharged engine with electronic unit injection fuel system and 7-speed electronically controlled...
Read More »
Accelerated Ejectors replace standard devices.
Accelerated ejectors are drop-in substitutes for industry standard ejectors in molds and dies. Ejectors are manufactured from heat-treated alloy steel, and are offered in 1:1 to 2:1 rack-travel ratio. All sizes fit in existing mold pockets. Ejectors can be customized to suit customer's particular application.
Read More »
How SpinSelect Can Save You Time and Money
Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.
Read More »
