EDM Machinery

CNC Die Sinker fits in 8 x 10 ft work zone.
EDM Machinery

CNC Die Sinker fits in 8 x 10 ft work zone.

Agietron Advance 2 EDM system incorporates filters, electrode magazine, dielectric unit, CNC, and generator into single unit. C-frame construction, high-resolution (0.000005 in.) servo, and precision-ground ball screws provide fast erosion speed to specific accuracy, with surface finish down to 0.2 Ra. Work tank integrates 4-position electrode magazine. Plug-and-play system provides full...

Read More »
EDM Machinery

EDM Machinery achieves steel finishes to Ra 0.1 µm.

Equipped with integrated dielectric tank and short C frame, Roboform 44 has moving cross table with 19.7 x 13.8 x 13.8 in. X, Y, and Z travel. Standard with linear glass scales, machine offers close loop positioning feedback on all axes over entire axis length. Additional offerings include 6-position tool changer and servo controlled C axis with speed of 70 in/min. Program Expert selects most...

Read More »
EDM Machinery

EDM Machinery offers doubled acceleration speed.

Roboform 35P and 55P are equipped with drop tanks, enabling operators to have access to machining table from three directions. Drop tank can be programmed to match workpiece height. All 35P, 54P, and 55P machines have glass scales and can accommodate Quick Change Robot feature. Products come equipped with Sinker Programming System. Offline system allows users to program diesinking applications...

Read More »
EDM Machinery

Multi-Axis Wire EDM Machine has compact body.

Brother HS-50A, 5-axis, wire EDM machine offers compact design with large X-Y travel and small footprint. Able to handle large workpieces through multiple small workpieces, machine includes taper modes that enable processing of production parts and mold and die components. Unit provides full closed loop control with linear glass scales for direct reading of table position. Automatic wire threader...

Read More »
Machining Center handles turbine-blade cooling holes.
Machining Centers

Machining Center handles turbine-blade cooling holes.

Model EDGE2S-5X, with sinker EDM technology and single tungsten-carbide electrode, uses electrode rotation and oil-based dielectric fluid. Offerings include 16-station automatic electrode changer, automatic pipe electrode guide, and MR rotating head, capable of Z-axis high-speed pulse machining at 396 ipm. Fixed table eliminates dielectric weight shift during machining, while rotary table can...

Read More »
EDM Machine targets stamping die market.
EDM Machinery

EDM Machine targets stamping die market.

The SP43 part-in/part-out production wire-cutting machine handles maximum workload of 1,760 lbs and is able to hold tolerances of ±5 Â-µ. It accommodates wire sizes from .004 to .012 in. diameter and taper cutting capability up to 15 deg. X-, Y-, and Z-axis travel is 18 x 12 x 12.8 in. Wire Wizard(TM) control software provides programming, set-up, and operation. It will output total...

Read More »
EDM Machine comes with automatic tool changer.
EDM Machinery

EDM Machine comes with automatic tool changer.

Compact Edge3 Sinker EDM is suitable for use in plastic injection molding and forging die job shops. It measures 78 x 84 x 92.8 in., weighs 10,340 lb, and has 8, 16, or 32 station automatic electrode changer. Machine has XYZ axis of 18 x 12 x 12.8 in. with Z-axis jump speed of 400 ipm. Traverse speed is 400 ipm and cycle time jump rates are 393 ipm. Worktable allows for workpieces as large as...

Read More »
EDM Drilling System makes micro-size holes.
EDM Machinery

EDM Drilling System makes micro-size holes.

Model CT1600-5ATS CNC EdmDrill(TM) has open X-Y table travel of 63 x 28 in., which allows it to accommodate large and heavy die sets and molds. Its PC based controller enables programming of all axes, has large program storage capacity, and provides seamless control of toolchanger, guide changer, and power supply. It has Theta Axis, which tilts drilling head ±70°, plus 24 tool...

Read More »
EDMs suit production or entry-level applications.
EDM Machinery

EDMs suit production or entry-level applications.

Designed for general job shop and die/mold applications, Xenon wire-cut EDM features X-Y-Z travels of 13.8 x 9.8 x 8.7 in. and offers ±15° taper in 4.7 in. thick material. SP and SE series of CNC die-sinking EDMs feature full 3 or 4 axis positioning and full orbiting capabilities. SE series includes integrated C-axis for full 4-axis positioning and linear electrode changer (ATC) for...

Read More »
EDM System incorporates dual-wire spooling.
EDM Machinery

EDM System incorporates dual-wire spooling.

Vertex wire-cut EDM system offers Agieduo(TM), which enables 2 different wire sizes to be changed without operator involvement. User can rough with large diameter wire and finish with small diameter. Vertex provides automatic threading of wires from 0.00078 to 0.008 in. dia through holes only 0.002 in. dia larger than wire itself. Thermally stabilized design, with precise (0.000004 in.) Dual...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers