Drilling System drills deep holes fast.
Drilling Services

Drilling System drills deep holes fast.

Model 200 BTA system has drilling capacity of 2.5 in. dia and 84 in. effective drilling depth. It is equipped with special refrigeration for proper coolant temperature control. Counter-rotation of workpiece helps system attain close tolerances. System drills nickel-base Inconel 600 and 700 series workpieces at penetration rate of 1.5 in./min.

Read More »
Drill Press handles tough applications.
Drilling Machinery

Drill Press handles tough applications.

Electromagnetic Model 4270-20 has 1.1 hp, 9.0 A motor. Two-coil magnet provides 2,300 lb of deadlift force on 1 in. thick steel, for stability during drilling. It drills holes up to 1 1/2 in. dia and 2 in. deep, using industry standard 3/4 in. dia shank annular cutters. With optional chuck arbor, maximum twist bit capacity is 1/2 in. dia and 4 1/4 in. deep. Control panel is on back of tool where...

Read More »
Annular Cutter drills into steel.
Drilling Machinery

Annular Cutter drills into steel.

Every other tooth in HSS High Speed Steel cutter is double beveled, enabling immediate centering for faster, more precise cutting. Thin wall makes cutting faster and more efficient by removing less material. Short flute enables chips to fall freely from cutter. Sizes range from 1/2 to 2 in. dia, in 1/16 in. increments. Applications include steel and metal fabricating, truck and auto...

Read More »
Portable Drill uses laser for alignment.
Hand Held Drills

Portable Drill uses laser for alignment.

Model PDL-24 has integrated laser that indicates actual lineal location of centerline of drill bit. Once operator establishes desired lineal location, it is locked into position for drilling. Rack and pinion positioning system moves drill to desired location or gage. This concept eliminates manual layout. System is adaptable to web and flanges of all structural shapes such as beams, columns,...

Read More »
Hammer Drills have high torque.
Hand Held Drills

Hammer Drills have high torque.

Cordless models 3870-04 18 V and 3670-04 14.4 V have 450 and 425 in.-lb of torque, respectively. Their 17-position clutches allow user to control torque level for specific applications and to select drill or hammer mode. Each tool has two-speed gear train, which provides 450 or 1500 rpm and creates powerful hammer action, delivering 0 to 5,000 and 0 to 17,500 BPM. By changing bit, they provide...

Read More »
Hand Held Drills

Hammer Drill has drill chuck capacity of 1/2 in.

Model FDV16VB Hammer Drill's low noise cooling air-flow design ensures protection against overheating. It contains ball and needle bearings, and is double insulated. FDV16VB's 5 AMP power-plus motor delivers no-load speeds of 0-2900 RPM with 550 W input. Other features include pistol type handle, keyless chuck, pressure sensitive trigger, and variable speed preset dial. Impact drill or drill only...

Read More »
Cordless Drill/Driver has 3-speed transmission.
Drills

Cordless Drill/Driver has 3-speed transmission.

DEWALT 18V heavy duty drill/driver kit has 3-speed all-metal transmission with MAX 3rd Speed for fast drilling and driving. Keyless 1/2 in. ratcheting chuck lock gives tight bit grip. High-torque motor delivers 450 in.-lb maximum torque. Extended run-time battery allows for more work per charge and no memory.

Read More »
Hammer-Drill Kit drills concrete, steel, and plastics.
Hand Held Drills

Hammer-Drill Kit drills concrete, steel, and plastics.

Model 5371-21 double insulated, 1/2 in., dual-torque Magnum® Hammer-Drill Kit features metal gear housings. Its 5.5 amp motor and dual-torque gearbox provide high-speed drilling (0-2500 rpm) with smaller bits, and ample torque for larger bits in low-speed range setting (0-1000 rpm). Hammer-Drill also features variable speed switch with reverse and selector for hammer with rotation, and...

Read More »
Chamfer Drills are made of solid carbide
Drills

Chamfer Drills are made of solid carbide

SD10, SD20 and SD25 Super Alloy geometry chamfer drills and intermediate and semi-standard solid drills are available with diameters from 3mm to 18mm. All drills are TiAIN coated, with an outer layer of TiN. They are self-centering, provide excellent chip control in most materials, and are suitable for use in unmanned machining. Drills have large back taper and conical-shaped front point for...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers