Hand Held Drills

Heavy-Duty Hammerdrill/Drill/Driver has ergonimic design.

Engineered with 36V NANO(TM) Phosphate Lithium Ion battery to accommodate up to 2,000 recharges, 36 V DC901KL employs 3-speed transmission that optimizes speed applied to each application. Mode section lets users transition among drilling, screwdriving, and hammerdrilling functions, and all-metal Â-½ in. self-tightening chuck continually tightens during operation for optimized bit retention....

Read More »
BIG Kaiser Showcases the Newest in Precision Tooling at Eastec Booth #5244
Machine Spindles

BIG Kaiser Showcases the Newest in Precision Tooling at Eastec Booth #5244

February 28, 2008 Elk Grove Village, IL - BIG Kaiser Precision Tooling Inc. will showcase a number of tooling product lines at Eastec 2008. Visit BIG Kaiser at Booth #5244 to see what's new from BIG Daishowa, Kaiser, Sphinx, Speroni, Unilock and more. BIG Kaiser's new Straight Shank FCR is designed for greater DOC and lower cutting resistance. Its geometry expands capabilities in multi-functional...

Read More »
Drilling Machinery

Terex to Feature New and Improved Products; Discovery Channel's Mike Rowe at ConExpo

Westport, Conn. (February 28, 2008) - Terex Corporation will participate in the 2008 ConExpo-Con/Agg Exposition, March 11-15 at the Las Vegas Convention Center displaying a diverse array of both new and improved products including: aerial work platforms; light, compact and heavy construction equipment; material handlers; cranes; crushers and screeners; mining; and road building equipment....

Read More »
Hand Held Drills

Cordless Hammer Drill delivers up to 26,800 blow/min.

Weighing 4.4 lb, 18 V lithium-ion Model SBZ18 features torque adjusting sleeve with 5 torque settings, forward and reverse acting motor, and all-metal 1/16-Â-½ in. keyless chuck. In first gear, drill operates at 0-400 rpm, and in second gear, tool offers speeds from 0-1,450 rpm. Model SBZ18 features drilling capacity of 1 3/16 in. in soft wood, ½ in. in steel, and 3/8 in. in...

Read More »
Micro Driver Drill features 10.8 V lithium ion battery.
Hand Held Drills

Micro Driver Drill features 10.8 V lithium ion battery.

Micro driver drill, Model DB10DL, measures less than 6 in. long and weighs 1.8 lb. With 88 lb-in. of turning torque and 21+1 stage clutch, drill can drive 130 three in. screws into wood during single battery charge. Features include battery charger that prevents overheating or power loss, Â-¼ in. hex chuck that allows for simple bit replacements, and optimized handle dimensions that create...

Read More »
Drilling Services

Pride International Selects Vetcogray's Advanced Marine Riser System for New Deepwater Drill Ship

FLORENCE, ITALY - February 7, 2008 - Pride International, one of the world's largest offshore drilling contractors, has selected the latest version of the MR-6 marine riser system from VetcoGray, a GE Oil & Gas business, for use on a new deepwater drill ship that will be completed in 2010. VetcoGray will supply two MR-6H SE Marine Riser Systems, which offer improved safety and efficiency for the...

Read More »
Drilling Machinery

Drilling Equipment Contract to Aker Kvaerner

1 February 2008 - Aker Kvaerner has been awarded a drilling equipment contract by Daewoo Shipbuilding & Marine Engineering Co. Ltd (DSME) in Korea for an ultradeep drillship. The total contract value for Aker Kvaerner is approximately USD 130 million. The scope of work is to deliver a complete drilling equipment package including installation and commissioning supervision. The contracts will be...

Read More »
Drilling Machinery

Sandvik Jumbos Selected for the A3 Hindhead Tunnel

12/03/2007 Balfour Beatty has appointed Sandvik Mining and Construction to supply the tunneling jumbos for the A3 Hindhead Tunnel Project currently being constructed for the Highways Agency. The supply contract is for three Sandvik DT820-AC twin boom with basket boom drills to be used on the 1.83km tunnel which forms part of the new 6.7km dual carriageway trunk road. Two of the jumbos will be...

Read More »
Drilling Machinery

Solid Carbide Micro Drill comes with 3 mm reinforced shank.

Made of fine-grained solid carbide, Sphinx micro drill is available in 0.30-1.50 mm dia in steps of .01 mm and in standard lengths of 6 x D. Specially designed 2-flute geometry delivers point angle of 130 deg and helix angle of 35 deg for high precision and close tolerance. Drill can be run with or without coolant, and suits materials such as steel (including stainless), titanium/nickel alloys,...

Read More »
Hand Held Drills

Corded Drills deliver 0-2,500 rpm.

Available with mid-handle grip or traditional pistol grip, 3/8 in. Corded Drills enable professional contractors to complete heavy-duty applications. Model DWD115K features 8.0 A of power, while Models DWD110K and DWD112 offer 7.0 A. All-metal keyless ratcheting chuck on Models DWD115K and DWD112 optimize bit retention. All models weigh 4.1 lb and come with anti-slip comfort grip.

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers