Cordless Drills include Rapid Max(TM) twin charger.
Available in 12, 14.4, and 18 V models, X2 series -½ in. cordless drills are equipped with 2-speed transmission for rates of 400/1,600 rpm or 450/1,600 rpm. With max torque levels from 365-485 lb-in., drills have auxiliary handles for increased control and handling. They come with 2 Max HC(TM) high capacity battery packs, 24-position clutch, and single-sleeve locking chuck with carbide jaws and...
Read More »Cordless Hammer Drill comes with 30 min battery charger.
Model R841151 X2, 18 V, Ã-½ in., Rear Handle Hammer Drill has 2-speed transmission (0-400/0-1600 rpm) and gearbox that permits hammering ranges of 0-6,400/0-25,600 bpm. Its 24-position clutch regulates torque output up to 485 lb-in. Unit comes with 2 Max HC(TM) battery packs and Rapid Max Twin(TM) charger. Metal, 2-sleeve locking chuck has carbide jaws and metal depth stop rod. Also included:...
Read More »Cordless Drills include 20-min Rapid Max Charger(TM).
Available in 12, 14.4, and 18 V models, 3/8 in. drills include 2 NiCad battery packs; die-cast, 24-position clutch ring; and self-ejecting battery pack feature. Products deliver torque from 350-460 lb-in. depending on model. Both 14.4 and 18 V models have 360Ã-
Read More »Electric Drill provides two variable speeds.
Model R7100 Heavy Duty Ã-½ in. Drill features hardened steel gears and 9 A motor that handles operation in dusty, abusive jobsites. Auto-stop brushes halt drill's operation when brushes are worn, before they damage motor. Automatic safety clutch protects user from kickback if bit accidentally jams. Two variable speeds, 0-1,000/0-3,000 rpm, permit screw driving and drilling. Model R7100...
Read More »Finding the Right Bore Configuration for your Application
There are multiple things to consider when choosing a bore configuration for your application. Check out this e-book to learn more!
Read More »VSR Hammer/Pulse Drill offers two modes of operation.
RIDGID-® heavy-duty, -½ in. Model R5010 has 2 dials that control torque and speed. When it senses need for slow, high-torque drilling, it switches into pulse mode. Drill uses 9 A Extended Motor Life motor; impact-grade, keyless chuck with spring-loaded internal clamp; and RIDGID auto-stop brushes. Drill features automatic safety clutch and has 2 variable speeds: 0-1,000 and 0-3,000 rpm. For...
Read More »Hole Drilling System offers capabilities down to .032 in.
Dual spindle deep hole drilling system utilizes counter-rotation of tool and workpiece, which can be set at speeds of 300, 600, or 1,200 rpm, for concentricity. Spindle drives are infinitely variable from 3,000-21,000 rpm and utilize direct drives with ceramic bearings. Its 2 spindles have independent way units that allow drilling of 2 different parts simultaneously. Drilling range is .032-.375...
Read More »Hammer Drill suits various applications.
Able to drill into materials from concrete and brick to wood, steel, and plastic, SBE660 Ã-½ in. hammer drill features one 5.8 A motor and 2-speed gear train. Product also incorporates 360Ã-
Read More »Pistol-Grip, 1/2 in. Drill drills large and small holes.
Housed in ergonomic package, BE1020 provides 248 lb-in. torque and incorporates 2-speed gearbox, S-automatic safety clutch, and winding protection grid. It also features electronic carbon brush wear indicator and Vario-Tacho-Constimatic full-wave electronic speed control. Drilling capacity is 5/8 in. (steel) and 1 9/16 in. (softwood). Utilizing 8.2 A motor, product has no-load speeds rated at...
Read More »Combihammers suitable for drilling and chipping.
Model TE 46 drills holes 5/8 to 1 in. in diameter and provides light duty chiseling. Models TE 56 and TE 56-ATC are suitable for drilling anchor holes and through holes, as well as medium chiseling. They can drill up to 3 9/16 in. dia holes in concrete. Active Torque Control provides added operator protection by constantly monitoring rotation of tool and disengaging drive system if it senses...
Read More »Gun Drilling Unit offers strokes of 135 mm and higher.
Model ECPP4 provides deep-hole drilling for mold-making industries. It combines spindles, slides, chip/coolant recovery box, drill bushing plate, high-pressure coolant union, gundrill adapter, and servo motor. Spindle has 40 taper opening with 3 hp ac motor and poly-V belt drive for smooth torque transmission. Slide consists of cast-iron base, linear ball guides, and ground, 25 mm ballscrew....
Read More »TPA Motion Introduces Industry's First Compact Robotic Positioner for Medical Devices
TPA Motion's microplate handling robots are designed specifically for medical instruments and lab automation devices. Check out the video to learn more.
Read More »