Drilling Services

UNISIG Demonstrates New Gundrill Grinder at Houstex 2015
Tool Grinders

UNISIG Demonstrates New Gundrill Grinder at Houstex 2015

MENOMONEE FALLS, Wis. – UNISIG, a manufacturer of deep-hole drilling systems, will demonstrate its new Gundrill Grinder at Houstex 2015 in Houston, Texas, from Feb. 24-26, in booth 1149. With the grinder, the company will also highlight its new UNE Gundrilling Machine Series. Designed as a complete system, the UNISIG Gundrill Grinder comes equipped with all necessary software, hardware,...

Read More »
Deep Hole Drill produces close tolerance holes. .
Machining Heads

Deep Hole Drill produces close tolerance holes. .

Suitable for diameters from 0.614–2.559 in. and tolerance demands of IT 9, CoroDrill® 808 features optimized pad design for good hole finish, unique edge preparation for chip breaking, and reinforced periphery insert corner for added security. Drill is equipped with fully traceable dot matrix. Two-dimensional patterned array is used for storage and display of various types of information,...

Read More »
Core Drill creates holes from 1/4 to 2 5/8 in. dia.
Drill Bits

Core Drill creates holes from 1/4 to 2 5/8 in. dia.

Weighing 7 lb, END 1550 P Wet Diamond Core Drill creates holes in natural stone, tiles, porcelain, stoneware, and glass without shock, dust, or vibration. Unit is powered by 13 A variable-speed motor that operates with no load speed of 1,800–4,400 rpm. For corrosion-free wet operation, drill features integrated water supply with flow control and stainless steel spindle. Changing drill bits and...

Read More »
Drilling Machinery

Boart Longyear to Be Major Sponsor of Australian Drilling Industry Association's DRILL 2014

SALT LAKE CITY - Boart Longyear (www.BoartLongyear.com), the world's leading provider of integrated drilling services, equipment and performance tooling, will be the major sponsor of the Australian Drilling Industry Association's (ADIA) DRILL 2014 conference on August 19 and 20 at the Gold Coast Convention & Exhibition Centre in Gold Coast, Queensland. Held every two years, DRILL is Australia's...

Read More »
Solid Carbide Microdrill can serve diverse applications.
Drill Bits

Solid Carbide Microdrill can serve diverse applications.

Built on KC7325™ solid carbide grade, GOdrill™ is designed for 0.0394–0.5 in. dia holes and works with multiple materials. Marginless design reduces friction and heat, and multilayer TiAlN-based coating allows for high-heat hardness. Second TiN top layer serves as visual wear indicator. Available in solid (flood coolant) or through-coolant options, drills also feature straight cutting lip...

Read More »
Solid Carbide Drill is designed for holemaking in aluminum.
End Mills

Solid Carbide Drill is designed for holemaking in aluminum.

Along with 135° drill point, HPS solid-carbide drill features Beyond™ KN15™ carbide grade with polished surface that reduces friction on flutes, margins, and cutting edges. This promotes chip evacuation, even in minimum-quantity lubrication (MQL) processes. While sharp cutting edges lower cutting forces and extend tool life, spiral flute design accelerates chip evacuation. Diameters...

Read More »
Solid-Carbide Drill cuts through CFRP-titanium stacks.
Drill Bits

Solid-Carbide Drill cuts through CFRP-titanium stacks.

Operating with through-coolant or without, B55_DAL drills CFRP-metal stacks in hole diameters of 3/16–5/8 in. Double-angle point design provides optimized centering, while sharp edge cleanly cuts composite fiber-reinforced polymers in top layer and exits titanium or aluminum side without burrs. For optimized chip evacuation, fine-grain solid-carbide Beyond™ KN15™ grade is highly polished....

Read More »
Two Finishing Options Now Available for Oil and Gas Drilling Components - MicroLok And TRU TEMP Provide Efficient Corrosion Protection
Miscellaneous Compounds

Two Finishing Options Now Available for Oil and Gas Drilling Components - MicroLok And TRU TEMP Provide Efficient Corrosion Protection

Eden Prairie, Minnesota – Birchwood Technologies now provides two finishing options for oil and gas drilling components - MICROLOK® AO and TRU TEMP®. Both finishes provide robust corrosion protection using a safe, low temperature, environmentally friendly process. With U.S. oil and gas production at its highest level in 20 years, the need for finishing components used in the...

Read More »
Drilling Services

Super Hero Packs a Laser at Laser Services' IMS Booth

Westford, MA – Laser Services, Inc., (www.laserservicesusa.com), an ISO and AS9100 registered laserÂ-  job shop, has announced the creation of the world’s first super hero who packs a laser in the tip of his finger to be ready at a moment’s notice to cut, drill, or weld his way out of any situation. “Laser Man,” created by Strand for Laser Services, is meant to personify Laser...

Read More »
Pipe and Piping

Industry Award to Aker Solutions' MPO Unit

Aker Solutions' subsidiary Managed Pressure Operations yesterday won a prize for its riser safety system at the Offshore Technology Conference in Houston. The Aker Solutions unit won the Woelfel Best Mechanical Engineering Achievement Award for its Riser Safety System (RSS). The award recognizes products, devices or systems that reflect innovation or practical use of mechanical engineering in...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers