Drill Bits

Walter to Feature New Advanced Technologies to its Cutting Tool Lineup at IMTS '14
Drill Bits

Walter to Feature New Advanced Technologies to its Cutting Tool Lineup at IMTS '14

Waukesha, WI – Walter, a leading cutting tool manufacturer, will showcase several new technologies in Booth W-1700 at IMTS '14, September 8-13, 2014, McCormick Place, Chicago, IL. The exhibit will feature the new Walter Blaxx™ F5055 slitting cutter, the latest addition to its Blaxx™ family of high-performance milling cutters. The mill incorporates similar technology to the Walter Cut SX...

Read More »
Plastic Case keeps drill bits safe and ready for use.
Drill Bits

Plastic Case keeps drill bits safe and ready for use.

Made of shock-resistant polyethylene plastic materials, bright orange-colored Walter Drill Bit Carrying Case helps protect Walter drill bits products from water, rust, oil, grease, and other contaminants. Closed, quick-release belt clip provides mobile end-users with practical means to- realistically work with 29-piece drill bit set.

Read More »
Plastic Case keeps drill bits safe and ready for use.
Drill Bits

Plastic Case keeps drill bits safe and ready for use.

Made of shock-resistant polyethylene plastic materials, bright orange-colored Walter Drill Bit Carrying Case helps protect Walter drill bits products from water, rust, oil, grease, and other contaminants. Closed, quick-release belt clip provides mobile end-users with practical means toÂ- realistically work with 29-piece drill bit set.

Read More »
Seco® to Spotlight Solutions for Composite Machining at THE BIG M(TM)
Drill Bits

Seco® to Spotlight Solutions for Composite Machining at THE BIG M(TM)

TROY, Mich. –- At THE BIG M manufacturing convergence event, taking place June 9 – 12 in Detroit, Mich., Seco Tools, LLC will showcase innovative milling and drilling tools and techniques that bring increased cutting performance to the machining of composite-based components in booth 330. Among the solutions Seco will have on display include the Jabro® JC800 series of CVD-diamond-coated...

Read More »
Seco-® to Spotlight Solutions for Composite Machining at THE BIG M(TM)
Drill Bits

Seco-® to Spotlight Solutions for Composite Machining at THE BIG M(TM)

TROY, Mich. –Â- At THE BIG M manufacturing convergence event, taking place June 9 – 12 in Detroit, Mich., Seco Tools, LLC will showcase innovative milling and drilling tools and techniques that bring increased cutting performance to the machining of composite-based components in booth 330. Among the solutions Seco will have on display include the Jabro® JC800 series of...

Read More »
Drill Bits

DTH Hammers and Bits are designed for down-the-hole drilling.

Designed to increase productivity in reverse circulation (RC) drilling and conventional down-the-hole (DTH) drilling, BLHâ„¢ series includes valved BLH5 and BLH3 hammers as well as valve-less BLH1. Bits are available to support all BLH hammers. BLH5 delivers balanced operation with minimized vibration as well as optimized productivity in various ground conditions, and BLH3 adds steel valve...

Read More »
Drill Bits

DTH Hammers and Bits are designed for down-the-hole drilling.

Designed to increase productivity in reverse circulation (RC) drilling and conventional down-the-hole (DTH) drilling, BLHâ„¢ series includes valved BLH5 and BLH3 hammers as well as valve-less BLH1. Bits are available to support all BLH hammers. BLH5 delivers balanced operation with minimized vibration as well as optimized productivity in various ground conditions, and BLH3 adds steel valve...

Read More »
Solid Carbide Deep-Hole Drills reach depth of 50 x diameter.
Drill Bits

Solid Carbide Deep-Hole Drills reach depth of 50 x diameter.

With respective drill depths of 40xD and 50xD, Walter Titex X•treme D40 and D50 employ XD (extremely deep) technology which enables holes to be drilled in one operation, without pecking, in steel, cast iron, or non-ferrous metals. TiALN-tip coating promote service life, and other features include internal coolant channels for optimum heat dissipation and reliable chip evacuation. Latter is also...

Read More »
Solid Carbide Deep-Hole Drills reach depth of 50 x diameter.
Drill Bits

Solid Carbide Deep-Hole Drills reach depth of 50 x diameter.

With respective drill depths of 40xD and 50xD, Walter Titex X•treme D40 and D50 employ XD (extremely deep) technology which enables holes to be drilled in one operation, without pecking, in steel, cast iron, or non-ferrous metals. TiALN-tip coating promote service life, and other features include internal coolant channels for optimum heat dissipation and reliable chip evacuation. Latter is also...

Read More »
Solid Carbide Microdrill can serve diverse applications.
Drill Bits

Solid Carbide Microdrill can serve diverse applications.

Built on KC7325™ solid carbide grade, GOdrill™ is designed for 0.0394–0.5 in. dia holes and works with multiple materials. Marginless design reduces friction and heat, and multilayer TiAlN-based coating allows for high-heat hardness. Second TiN top layer serves as visual wear indicator. Available in solid (flood coolant) or through-coolant options, drills also feature straight cutting lip...

Read More »
Sponsored

Simple Connection – MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics