Drill Bits

Deep Hole Micro Drills promote process reliability.
Drill Bits

Deep Hole Micro Drills promote process reliability.

Able to handle ISO-P, M, K, and N material groups, Walter Titex Xotreme M, DM8, and DM12 respectively cover drilling depths up to 5 x D, 8 x D, and 12 x D. Each solid carbide drill, available in diameters from 2-2.95 mm, has AlTiN-based coating for optimal cutting performance and tool life. Point geometry ensures precise positioning on entry, while internal cooling and polished flutes with...

Read More »
Drill Bits

Ulterra Bit Drills Entire Eagle Ford Well at Record Pace

FORT WORTH, Texas, Dec. 4, 2011 - The new U616M, 8.75-in., six-bladed matrix bit with 16-mm cutters drilled from surface casing to TD at a record pace of 93 ft/hr. All three intervals - the vertical, curve and lateral - were drilled with the same bottom hole assembly, reaching TD without a trip out of the well. A total of 9,953 ft was drilled in 107 hrs, a time savings of 37.5 hours over the...

Read More »
Drill Bits

Solid Carbide Drill is designed for deep hole operations.

Offered as special tool with diameters from 5-12 mm dia, Walter Titex XD70 can produce holes up to 70xD in one operation and does not require pecking. Cooling is provided via internal coolant channels, and no special coolant equipment, such as an external high-pressure system, is required. Standard cooling unit, such as those available with any machining center, is sufficient. Respectively, TTP...

Read More »
Wear-Resistant Insert Drills combine durability, flexibility.
Drill Bits

Wear-Resistant Insert Drills combine durability, flexibility.

Walter Valenite Xtraotec® insert drills come in diameters as small as 0.531 in., which are suitable for depths up to 5xD and equipped with size 1 inserts. Also available, cartridge format drills cover 2.35-4.70 in. dia range. Standard version features 3.15 in. dia with 3xD depth, while 4.70 in. dia and 5xD depth model can be ordered. Hole diameter can be finely adjusted to 0.024 in. on...

Read More »
Solid Carbide Drill suits shallow hole drilling applications.
Drill Bits

Solid Carbide Drill suits shallow hole drilling applications.

Featuring 4-margin design, 140° point angle, and L/D ratio of 3 x D, short version of Titex X•treme Drill is suitable for drilling angled entry/exit surfaces, convex workpiece surfaces, and cross holes. Internal coolant supply and aluminum chromium nitride-based XPL coating maximize tool life. Available from 1/8-Â-¾ in. with cylindrical or whistle notch shank, drill is suitable...

Read More »
Multi-Purpose Drill works with wide range of materials.
Drill Bits

Multi-Purpose Drill works with wide range of materials.

Featuring advanced VDS point geometry, VariDrill(TM) minimizes chipping on cutting edge and delivers extended tool life across range of materials, including steels, stainless steels, cast irons, non-ferrous materials, and high-temperature alloys. Its point and flute design enables chips to roll smoothly, minimizing friction, heat, jamming, and scratching. Available in 3XD, 5XD, and 8XD lengths as...

Read More »
Coolant-Through Drills can be used with diverse materials.
Drill Bits

Coolant-Through Drills can be used with diverse materials.

In addition to coolant-through capabilities, HY-PRO® CARB 3D and 5D Drill Series feature point and flute geometry that reduce thrust forces and chip size. Applied multi-layered TiAlN coating resists thermo-cracking from heat, improving wear resistance, and overall design fosters achievement of higher feeds and metal removal rates. Common DIN shank sizes promote rigidity while reducing...

Read More »
Solid Carbide Drills are offered in non-coolant thru versions.
Drill Bits

Solid Carbide Drills are offered in non-coolant thru versions.

Non-coolant thru versions of Titex X-treme(TM) solid carbide high-performance drills are available from 1/8-Â-¾ in. dia and can be used with all common materials. Featuring 4-margins design that promotes stability relative to workpiece, drills maintain position at point of entrance or exit as well as when machining inclined surfaces. Additional features include aluminum chromium...

Read More »
Solid Carbide Drills are for machining aerospace materials.
Drill Bits

Solid Carbide Drills are for machining aerospace materials.

Feedmax(TM) -N solid carbide drills, suited for drilling in aluminum and non-ferrous materials, feature low-silicon coating that suits machining of aluminum with less than 10% silicone, as well as brass, zinc, and magnesium. Tools have conical front clearance with 12° relief angle and 140° point angle, with narrow land margins to minimize friction and buildup of material on edges....

Read More »
Solid Carbide 30xD Drill suits deep hole drilling applications.
Drill Bits

Solid Carbide 30xD Drill suits deep hole drilling applications.

Available in diameters from 4-10 mm, Feedmax(TM) SD230A features 4-facet point geometry that provides optimal centering capability, with primary and secondary relief angles and point angle of 136°. Four land margins provide stability and maximize hole quality. Featuring low-friction, TiAIN + TiN coating, drill is suited for applications found in automotive, oil and gas, mold and die,...

Read More »
Let Our Safety Experts Lower Your Risk
Sponsored

Let Our Safety Experts Lower Your Risk

Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers