Drill Bits

Drill Bits

Solid Carbide Drill is designed for deep hole operations.

Offered as special tool with diameters from 5-12 mm dia, Walter Titex XD70 can produce holes up to 70xD in one operation and does not require pecking. Cooling is provided via internal coolant channels, and no special coolant equipment, such as an external high-pressure system, is required. Standard cooling unit, such as those available with any machining center, is sufficient. Respectively, TTP...

Read More »
Wear-Resistant Insert Drills combine durability, flexibility.
Drill Bits

Wear-Resistant Insert Drills combine durability, flexibility.

Walter Valenite Xtraotec® insert drills come in diameters as small as 0.531 in., which are suitable for depths up to 5xD and equipped with size 1 inserts. Also available, cartridge format drills cover 2.35-4.70 in. dia range. Standard version features 3.15 in. dia with 3xD depth, while 4.70 in. dia and 5xD depth model can be ordered. Hole diameter can be finely adjusted to 0.024 in. on...

Read More »
Solid Carbide Drill suits shallow hole drilling applications.
Drill Bits

Solid Carbide Drill suits shallow hole drilling applications.

Featuring 4-margin design, 140° point angle, and L/D ratio of 3 x D, short version of Titex X•treme Drill is suitable for drilling angled entry/exit surfaces, convex workpiece surfaces, and cross holes. Internal coolant supply and aluminum chromium nitride-based XPL coating maximize tool life. Available from 1/8-Â-¾ in. with cylindrical or whistle notch shank, drill is suitable...

Read More »
Multi-Purpose Drill works with wide range of materials.
Drill Bits

Multi-Purpose Drill works with wide range of materials.

Featuring advanced VDS point geometry, VariDrill(TM) minimizes chipping on cutting edge and delivers extended tool life across range of materials, including steels, stainless steels, cast irons, non-ferrous materials, and high-temperature alloys. Its point and flute design enables chips to roll smoothly, minimizing friction, heat, jamming, and scratching. Available in 3XD, 5XD, and 8XD lengths as...

Read More »
Peristaltic Pump Vs. i-FILL® Technology
Sponsored

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Read More »
Coolant-Through Drills can be used with diverse materials.
Drill Bits

Coolant-Through Drills can be used with diverse materials.

In addition to coolant-through capabilities, HY-PRO® CARB 3D and 5D Drill Series feature point and flute geometry that reduce thrust forces and chip size. Applied multi-layered TiAlN coating resists thermo-cracking from heat, improving wear resistance, and overall design fosters achievement of higher feeds and metal removal rates. Common DIN shank sizes promote rigidity while reducing...

Read More »
Solid Carbide Drills are offered in non-coolant thru versions.
Drill Bits

Solid Carbide Drills are offered in non-coolant thru versions.

Non-coolant thru versions of Titex X-treme(TM) solid carbide high-performance drills are available from 1/8-Â-¾ in. dia and can be used with all common materials. Featuring 4-margins design that promotes stability relative to workpiece, drills maintain position at point of entrance or exit as well as when machining inclined surfaces. Additional features include aluminum chromium...

Read More »
Solid Carbide Drills are for machining aerospace materials.
Drill Bits

Solid Carbide Drills are for machining aerospace materials.

Feedmax(TM) -N solid carbide drills, suited for drilling in aluminum and non-ferrous materials, feature low-silicon coating that suits machining of aluminum with less than 10% silicone, as well as brass, zinc, and magnesium. Tools have conical front clearance with 12° relief angle and 140° point angle, with narrow land margins to minimize friction and buildup of material on edges....

Read More »
Solid Carbide 30xD Drill suits deep hole drilling applications.
Drill Bits

Solid Carbide 30xD Drill suits deep hole drilling applications.

Available in diameters from 4-10 mm, Feedmax(TM) SD230A features 4-facet point geometry that provides optimal centering capability, with primary and secondary relief angles and point angle of 136°. Four land margins provide stability and maximize hole quality. Featuring low-friction, TiAIN + TiN coating, drill is suited for applications found in automotive, oil and gas, mold and die,...

Read More »
Drill Bits

Solid-Carbide Drills are optimized for deep hole applications.

Available with 15XD, 20XD, 25XD, and 30XD length ratios, WIDIA-Rubig(TM) deep-hole drills come in 3.0-13.0 mm diameters and do not require special drivers or guide bushings. Products can also be used in machining centers and are engineered to enhance material removal rate, hole quality, and cycle times. With 132° cone-point geometry, drills provide thrust and centering ability that lend to...

Read More »
Seco Tools to Showcase Wide Range of Tooling Solutions at AeroDef Manufacturing 2011
Drill Bits

Seco Tools to Showcase Wide Range of Tooling Solutions at AeroDef Manufacturing 2011

Troy, Michigan - Seco Tools will be demonstrating a comprehensive range of tooling solutions for aerospace and defense applications at AeroDef Manufacturing 2011. The company will exhibit its products in booth #1778 at the event, which takes place April 5 - 7 at the Anaheim Convention Center in Anaheim, California. In recent years, Seco Tools has concentrated heavily on developing tooling...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics