Thick Film Chip Resistor Dividers handle voltages up to 3 kV.
Power Dividers

Thick Film Chip Resistor Dividers handle voltages up to 3 kV.

Manufactured with alumina substrate, 0.240 x 0.126 x 0.025 in. Series CDHV handles voltages up to 3 kV with voltage coefficient down to 5 ppm/V. It provides resistance values of 1 megohm to 20 gigohms that are available in standard and custom resistance ratios from 10:1 to 500:1, with ratio stability of less than 0.03% at full power and 70°C at 2,000 hr. Absolute resistance tolerance...

Read More »
Guardrails and Railings

Barrier System provides safety at interior loading docks.

Designed to define and separate areas in facilities, GuardRite® SB3 is constructed from 6 in. high nylon restraining straps and is available in 43 in. high double strap system. Yellow straps provide visibility while absorbing impacts from material handling equipment. Safety yellow, powder-coated 5 x 5 3/16 in. steel posts support restraining straps and provide barrier capable of...

Read More »
Frequency Dividers

TTL/NECL Frequency Divider has programmable, 2-phase design.

Self-contained divider pod, PRL-260ANT, accepts input frequency f from dc to 1 GHz and outputs divided TTL and ECL clock signals with ratios from f/2-f/4096. Able to be cascaded with additional PRL frequency dividers, it accepts TTL and ECL clock signals as well as ac-coupled PECL, LVPECL, or sinewave signals. All divided outputs are synchronous with input frequency, and division ratios are...

Read More »
Frequency Divider accepts TTL clock signals from DC-100 MHz.
Frequency Dividers

Frequency Divider accepts TTL clock signals from DC-100 MHz.

Self-contained, 4 Decade TTL Model PRL 230 generates f/10, f/100, f/1,000, and f/10,000 divided outputs. TTL input has switchable 50 ohm/500 ohm input impedance, and can toggle up to 100 MHz. Four divided TTL outputs are back-matched, and each delivers greater than 2.2 V into 50 ohm load. Outputs are synchronous with input frequency and can be used for triggering data acquisition systems, pattern...

Read More »
Resistor Voltage Divider is offered in SOT-23 package.
Voltage Dividers

Resistor Voltage Divider is offered in SOT-23 package.

Suited for medical, aerospace, industrial, and military industries, SS1 Series precision voltage divider networks are manufactured in 3-lead SOT-23 package. Networks, consisting of 2 Nichrome thin film resistors on silicon substrate connected in series, are available in resistance nominal and ratio values from 5-100 kohm. Standard ratio values include 1:1, 1:4, and 1:10, with others available....

Read More »
Bracket separates power and voice/data cables.
Power Dividers

Bracket separates power and voice/data cables.

CADDY® CATPDCM Power Divider Bracket provides separate pathways for power and voice/data cables with strut in center acting as NEC®-required barrier. Available in 8 and 12 in. sizes, single, divided U-hooks feature large diameter, rounded support surfaces that prevent over-bending and kinking of cables. Optional CADDY® CATCSCM Cross Support widens system to 24 in. It attaches...

Read More »
SMT Power Dividers offer 2, 3, or 4-way power division.
Power Dividers

SMT Power Dividers offer 2, 3, or 4-way power division.

Rated at 50 W, HybriX® P2S50D and P2D50J feature Wilkinson circuit for 2-way power division and provide in-phase 3 dB power division for 800-1,000 MHz and 1.7-2.0 GHz frequency band, respectively. Based on Wilkinson circuit for 3-way power division, 35 W HybriX® P3S35L provides in-phase 4.77 dB power division over 2.0-2.4 GHz frequency band. HybriX® P4L50G, rated at 50 W, offers...

Read More »
Privacy Screens do not allow UV light penetration.
Partition / Privacy Screens

Privacy Screens do not allow UV light penetration.

Privacy screens block off specific operations from other parts of facility. They can be used to shield against grinding or sanding debris and set-up temporary offices or eating areas. Non-see-thru products have 14 oz, reinforced, vinyl-coated, polyester fabric screens and 1 3/16 in. extruded aluminum frame with under-over leg design that allows adjacent panels to be placed at desired angles.

Read More »
Decade Voltage Dividers offer voltage ratings of 1,200 V.
Voltage Dividers

Decade Voltage Dividers offer voltage ratings of 1,200 V.

Compact Series 1776-C67 and 1776-C68 are for 3Â-½-, 4½-, and 5½-digit handheld and benchtop multimeters, power-quality meters, and other devices where precision voltage is required. Featuring Tetrinox® Film System, dividers offer load life stability of 2,000 hr at full rated voltage at 85°C, and ratio stability of 0.005% max. Voltage division ratio tolerance is...

Read More »
Foil Resistor Divider provides stability of 0.01% at 0.05 W.
Power Dividers

Foil Resistor Divider provides stability of 0.01% at 0.05 W.

Surface mount DSM series integrates one matched pair of Bulk Metal® Foil resistors with absolute values of 5 ppm/°C and tracking values of 1 ppm/°C or better. Product utilizes 2-resistor, 3-terminal resistor network in compact molded, epoxy package that measures 0.16 x 0.106 in. With silver-coated copper-alloy terminals, product offers resistance values of 100 ohm to 10 kohm in...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers