Dispensers

Load Transfer Station includes pallet dispenser module.
Material Handling Equipment

Load Transfer Station includes pallet dispenser module.

Load Transfer Station removes original pallet and automatically replaces it with outbound pallet without assistance of forklift. Single pallets can be tranferred by selecting Manual Override Cord. Pallet dispenser becomes dormant and unit operates as standard Semi-Automatic Load Transfer Station. Systems can transfer from 3 to 55 loads per minute. They include overhead pivot pole controls, hour...

Read More »
Dispensers

Dispense Systems have low-level sensors.

PN 97020 and PN 97017 have sensors that alert users to diminishing levels of adhesive in reservoir. Both can apply cyanoacrylate, anaerobic, or acrylic adhesives packaged in 200 g tubes, 250 ml, 1 lb, 1 liter, and 2 kg bottles. They interface with hand-held applicators and automatic dispense valves. PN 97020 operates at 0 to 15 psi for dispensing low to medium viscosity fluids; PN 97017 runs at 0...

Read More »
Adhesive Dispense Valve makes precise deposits.
Needle Valves

Adhesive Dispense Valve makes precise deposits.

Compact MicroDot(TM) 741MD-SS needle valve makes microdeposits as small as 0.007 in. dia. Internal needle seats in hub of dispensing tip reduces amount of dead fluid between needle seat and substrate. Pneumatically operated valve applies variety of assembly fluids including UV-cure adhesives, solvents, lubricants, and epoxies. Calibration knob allows user to restore valve stroke setting and...

Read More »
Towel Dispenser reduces risk of cross-contamination.
Dispensers

Towel Dispenser reduces risk of cross-contamination.

Tork® Xpress Hygienic Dispensing System offers portion-controlled interfolded feature that dispenses hand towels one at a time. Hygiene shield protects each towel until it is used. Since there are no levers or handles, patrons only touch towel they use, reducing risk of spreading germs. Tork® Xpress comes with choice of 1- or 2-ply, 3- and 4-panel towels.

Read More »
Dispensers

Adhesive Dispenser mixes two-component adhesives.

Portable ShotGun(TM) table-top system dispenses either timer-controlled single shot or continuous bead of adhesive. It includes ConProTec Inc.'s MIXPAC 200 or 400 ml pneumatic guns and can use any 2-component adhesive packaged in MIXPAC cartridges. Standard units are mounted on 30 x 24 in. high-density polyethylene work table with foot pedal operation. It has swivel gun mount, adjustable height,...

Read More »
Dispenser creates circular patterns and continuous beads.
Applicators

Dispenser creates circular patterns and continuous beads.

Program-A-Swirl(R) maximizes adhesion between 2 substrates, using less material to wet-out greater area. Swirling is achieved when servo motor spins dispenser's nozzle. System can dispense single-component materials, or it can be used with static mixer nozzle for 2-component, reactive-resin materials. It is typically mounted at end-of-arm tool in robotic applications, or fixture-mounted in...

Read More »
Dispenser Kit eliminates adhesive-related waste.
Dispensers

Dispenser Kit eliminates adhesive-related waste.

Model 1500XL-CA tabletop dispensing unit uses microprocessor circuitry and controlled air pressure to provide control over amount of cyanoacrylate applied, allowing user to dispense same amount every time. Cyanoacrylate is contained in disposable syringe reservoir connected to dispenser console by air line. Clog-resistant, Teflon(R)-lined dispense tips provide trouble-free application. Coalescing...

Read More »
Brush Tips apply materials consistently.
Brushes

Brush Tips apply materials consistently.

Dispensing Brush Tips, in soft and hard styles, are suitable for applying consistent brush deposits of most materials, particularly grease and lubricants. Tapered bristles ensure accurate applications and long life. Both styles are connected to syringe or dispensing valve by a quick-release Luer-Lock fastening. They can be used with any of company's automatic or manual dispense systems.

Read More »
Piston Valve assures lubrication on every part.
Piston Valves

Piston Valve assures lubrication on every part.

Model 725DA-SS stainless steel, pneumatically operated piston valve applies accurate, uniform dots and stripes of grease without mess, drooling, or maintenance. It employs no seals to wear out, leak, or degrade performance. It offers clean cutoff and external stroke control. Model 725DA-SS can be used in new assembly machines, or can retrofit to existing production lines.

Read More »
Tape Dispenser keeps tape ready and out of the way.
Dispensers

Tape Dispenser keeps tape ready and out of the way.

Pull-and-Tear bench-mount tape dispensers, built from 1/8 in. metal with powder coat, are available in 1 and 2 in. widths. Both widths are available in either permanent flush mount or portable clamp-on versions. Dispensers mount permanently on either side of workstations using screws or, temporarily, with a clamp. Tape may be slipped onto spool without dis-assembling unit. Applications include...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers