Dispensers

Pneumatic Dispenser has pedal-controlled vacuum pickup pen.
Dispensers

Pneumatic Dispenser has pedal-controlled vacuum pickup pen.

Suited for assembly and repair of small parts, Model 8500(TM) offers 2 independent vacuum and air modules with separate foot pedals for controlling pickup pen and handheld syringe. Bench-top workstation frees both hands for manual operation and provides timed dispensing from 0.1 sec to over 3 min. With adjustment knobs to control each function, unit provides up to 100 psi dispensing pressure, has...

Read More »
Dispenser identifies drill bits at a glance.
Storage, Shipping and Disposable Boxes

Dispenser identifies drill bits at a glance.

Silver Deming Drill Dispenser features labeled compartments that ID each drill bit. It holds 11 most commonly used sizes ranging from 1 to 1 Â-½ in. and can store 2 bits of each size. Measuring 14 5/8 in. wide by 7 3/8 in. deep by 7-3/4 in. high, dispenser fits on shelf, in cabinet, and on top of work bench. It is fabricated from heavy-gauge steel with epoxy powder finish.

Read More »
Cordless Bonding System applies hot melt adhesive.
Dispensers

Cordless Bonding System applies hot melt adhesive.

HiPURformer(TM) Advanced Bonding System enables maintenance personnel to permanently affix and/or repair materials on interior, exterior and grounds of facility. It includes applicator tool and 3 types of Titebond® waterproof polyurethane hot melt adhesives packaged in no-drip metal cartridges. Each cartridge provides approximately 71 linear ft of adhesive at 1/16 in. bead. Electric 120 V...

Read More »
Coating Weight Control dispenses hot-melt adhesives.
Dispensers

Coating Weight Control dispenses hot-melt adhesives.

Model ES 10 III automatically calculates pump speed for different application weights to support production changeovers. With text display, operator interface provides direct input of application weight and width that coordinates with pump capacity and line speed information. PLC-based control system eliminates manual pump speed calculations. Unit supports manual programming for additional pumps...

Read More »
Dispenser provides positive displacement dispensing.
Dispensers

Dispenser provides positive displacement dispensing.

I&J123-S and I&J123-D Series provide air-free volumetric dispensing of any 2-part epoxy or single-part fluid material. Hydro-Link micro-step motor of 16:1 connects to precision piston ram assembly and accommodates syringes of 3, 5, 10, 30, and 55 cc, together with meter, mix, and dispense twin-packaged cartridges of 50, 200, 400, and 600 ml. Units can dispense from 0.0004 cc with programmable...

Read More »
Label Dispenser handles transparent and very small labels.
Dispensers

Label Dispenser handles transparent and very small labels.

Suited for production applications, Model LD-100S uses foot-switch controlled advance mechanism. If label can be seen by operator, LD-100S correctly dispenses it. Variable speed control advances labels according to operator's desired speed. Supply roll of labels, up to 4 in. wide, slides onto built-in Roll Holder, which accepts up to 8Â-½ in. roll size and core diameters from 1½ to 3...

Read More »
Fluid Dispenser includes digital display.
Dispensers

Fluid Dispenser includes digital display.

Digital DK118 Teach and Learn system will dispense exact repeat of set-value, and will save setting when system is switched off. Digital LED display provides 12.7 mm, 3-character set with floating point for immediate recognition by user. Display can toggle between digital readout of regulated air supply pressure and programmed dispense period. Setting can be programmed from 0.01 to 99.9 sec, and...

Read More »
Adhesive Melters use intuitive graphic controls.
Dispensers

Adhesive Melters use intuitive graphic controls.

ProBlue(TM) melters are offered in 4, 7, and 10 L tank sizes with piston-pump technology. All-electric DuraBlue(TM) melters incorporate fixed-speed AC motors and gerotor gear pumps and are available in 4, 10, 16, 25, 50, and 100 L sizes. VersaBlue(TM) melters feature spur gear pumps with variable speed AC drives. They are available in 12, 25, 50, and 100 L sizes. All lines have status indicators...

Read More »
Napkin Dispenser reduces waste by average of 24%.
Dispensers

Napkin Dispenser reduces waste by average of 24%.

RollNap® features pull and tear design that provides one-at-a-time dispensing to ensure portion control and prevent cross contamination. Constructed of easy-to-clean plastic, it is available in red, black, and granite/gray. Dispenser holds 40% more napkins than most dispensers, making it suitable for high traffic venues such as colleges, health care, convenience stores, office break rooms,...

Read More »
Dispensers meter and mix small shots.
Dispensers

Dispensers meter and mix small shots.

Series I&J10 dispenses 0.012 to 5 cc of mixed material with accuracy of 1% using Dead-Stop feature to ensure repeatability. It can be robot mounted (I&J10R) and supplied with stepping-motor drive (I&J10RS) to avoid pneumatic stroke delays and to enable variation of dispense rate. Portable bench mounted model (I&J10B) utilizes small bench area; reservoirs mount directly on system. Model I&J10F...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers