Dispensers

Nozzles

Nozzle offers precise application of anaerobic products.

Nozzle is used on threadlocking, thread sealing, and retaining compounds packaged in 50 ml and 250 ml red bottles. Translucent application tip offers visual indication of product when dispensed. Pull/open, push/close nozzle features built-in reservoir, which prevents product from dripping down bottle. With orifice of 0.7 mm, nozzle eliminates need for snipping tip; however it can be trimmed to...

Read More »
Meter/Mix/Dispense Machines accept viscosities from 150 cps.
Dispensers

Meter/Mix/Dispense Machines accept viscosities from 150 cps.

Variable-ratio gear-pump machines offer precision gear pumps and electronic interlock to ensure selected ratio is fixed and password protected. Metered shot and flow range is from 0.75 ml per shot to 250 liters/min, depending on selected system. Ratio ranges vary from 1:1 to 50:1, and viscosities of 150-100,000 cps can be accommodated. Systems are suited for RIM and doming applications that...

Read More »
Liquid Handling System enables miniaturization of assays.
Laboratory Equipment

Liquid Handling System enables miniaturization of assays.

Nanomek(TM) Liquid Transfer Module pipettes volumes from 50 nanoliters to 20 microliters and is integrated directly on Biomek® FX workstation, for automated nanoliter dispensing in 96-, 384- and 1536-well plate formats. It incorporates Allegro Technologies' spot-on(TM) liquid handling technology, providing dispensation control, precision, and accuracy. Module enables miniaturization of...

Read More »
Dispense Valve produces single shots and continuous beads.
Valves

Dispense Valve produces single shots and continuous beads.

Precision, positive displacement Dispensit® Model 2092/2093 is suited for use with highly filled and abrasive materials such as thermally conductive adhesives, greases, and electrically conductive adhesives. Available in pneumatic and electric drive modules, unit incorporates abrasion-resistant wetted components and modular design for dispensing precise single shots or continuous beads.

Read More »
5 Questions to Ask When Choosing a Custom Glass Manufacturer
Sponsored

5 Questions to Ask When Choosing a Custom Glass Manufacturer

Due to the inherent complexity of glass fabrication, many professionals seeking glass services know exactly what kind of part is needed, but are unclear on the intricacies of the actual manufacturing process. PEG's exclusive guide is designed to help professionals navigate the custom glass manufacturing process with valuable information.

Read More »
Dispensing Workstation suits potting/filling applications.
Dispensers

Dispensing Workstation suits potting/filling applications.

Measuring 16 x 16 x 17 in., semi-automatic Dispensit® 490-Z accepts single- and plural-component dispense valves. Bench-Top unit requires 120/1/50-60 electrical and 70 psi compressed air to operate and comes equipped with pneumatic Z lift, dovetailed tooling plate, parts nest, Dispensit dispense valve, material supply system, and controller with anti-tie down cycle start. Product suits...

Read More »
Meter-Mix-Dispense System provides repeatable shots.
Dispensers

Meter-Mix-Dispense System provides repeatable shots.

EZ-mix® FR Disposable Cartridge Meter-Mix-Dispense System accurately dispenses 2-part materials ranging from water-thin to high viscosity. Featuring self-prompting controller, linear encoder, and pinch valve, positive displacement bench-top system achieves uniform shots to within 0.1 cc with no run-on, lead-lag, or dripping. Foot pedal opens pinch valve, which assures pulse-free performance...

Read More »
Dispensers

Adhesive Packaging collapses when emptied.

Environmentally-friendly one-liter containers, for company's anaerobic adhesive line, occupy 1/3 less space when full versus traditional liquid adhesive packaging. Once emptied, container collapses reducing amount of packaging waste. Containers are compliant with Rigid Plastic Container Laws by State of California Integrated Waste Management Board and are compatible with all company dispensing...

Read More »
Dispensing System uses air-free, mechanical drive.
Dispensers

Dispensing System uses air-free, mechanical drive.

Model LDS9000 features handheld gun with linear actuator-driven mechanical lead screw that smoothly pushes adhesive through plastic syringe. Dispense volume, flow rate, drawback, and drawback delay rate are programmable. Providing fully repeatable dispensing, system operates without pulsation and pounding of pneumatic dispensing systems. When dispense cycle is finished, system pulls plunger back...

Read More »
Two-Part Adhesive Gun dispenses fine bead without shaking.
Applicators

Two-Part Adhesive Gun dispenses fine bead without shaking.

EZ-mix®HI hand-held dispenser eliminates repetitive squeezing and permits fine-tip dispensing. Portable, cordless unit incorporates light-touch trigger and instant retraction button for cartridge changes. Able to dispense up to fifty 50 ml dual cartridges on 1 charge, Drip-Free(TM) design reduces/eliminates oozing from mix-tip. Made of ABS plastic, ergonomic tool has hardened steel drive...

Read More »
Electronic Soap Dispensers encourage hygienic handwashing.
Dispensers

Electronic Soap Dispensers encourage hygienic handwashing.

Optima® dispensers with automatic sensor operation are available in 2 models: hardwire transformer model ESD-200 for plug-in installations and battery-powered model ESD-250 for 1-trade installations and retrofits. Both models are supplied with 800 ml soap cartridge that can be installed and refilled. Operation starts when user's hands reflect beam into sensor-receiver, activating pump that...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers