Dispensers

Dispensing System administers patterns and beads.
Dispensers

Dispensing System administers patterns and beads.

Program-A-Swirl® dispenses adhesives or sealants in circular swirling pattern or continuous bead. Swirling is achieved by oscillating nozzle assembly, creating concentric circular pattern. Assembly self-centers its action, allowing tool to alternate on-the-fly between dispensing swirl pattern and consistent bead path. System can be used with standard nozzle for single-component materials or...

Read More »
Dispense System utilizes twin-pack cartridges.
Dispensers

Dispense System utilizes twin-pack cartridges.

Model I&J123-DMIX mechanical dispense system dispenses 200, 400, and 600 ml cartridges with ratios of 1:1, 2:1, and 10:1. Any ratio can be programmed into 1:1 twin-pack or two 6 oz SEMCO® type cartridges. System incorporates 2 on-board computers driving 2 independent stepping motor rams that attach to barrier pistons in cartridge and are able to grip and pull back to prevent drooling of...

Read More »
Dispensing Jet delivers fluid in spaces as small as 200 µm.
Nozzles

Dispensing Jet delivers fluid in spaces as small as 200 µm.

DispenseJet® DJ-9000 provides high-speed delivery of variety of fluids including underfill, encapsulants, conformal coatings, UV adhesives, and silver epoxy. It creates fillet wet-out widths as small as 300 Â-µm on dispensed side of die. Jet dispenses fluid as discrete dots or rapid succession of dots to form 100 micron diameter stream of fluid from nozzle. It offers flow rates up to...

Read More »
Dispense System produces large or small volumetric shots.
Dispensers

Dispense System produces large or small volumetric shots.

Air-powered Shot-A-Matic® can be operated manually or integrated into automated or robotic applications. It measures and dispenses required amount of single- or plural-component materials such as grease, silicone, and epoxy. System includes volume adjustments that are locked in after set and can dispense less than 1 cc to several hundred cc's. Adjustable hard-stop shot controls and clean...

Read More »
Meter/Mix System suits potting and bonding applications.
Dispensers

Meter/Mix System suits potting and bonding applications.

Benchtop See-Flo® 387 dispenses shots of 2-component epoxy, silicone, or urethane materials for potting, encapsulating, and bonding applications. Fixed-ratio, air-powered system includes positive-displacement meter with AirDraulic(TM) drive; 2 one-gallon, stainless steel material-holding tanks; foot-pedal actuator; and dispense-valve assembly with No-Flush(TM) mixers. Shot size of mixed...

Read More »
Custom Fluid Dispensing Systems offer XYZ motion control.
Dispensers

Custom Fluid Dispensing Systems offer XYZ motion control.

Integrated XYZ Motion Control/Fluid Dispensing Systems feature customized software that lets users enter motion control and dispensing commands into same program. Providing dispensing repeatability to better than 1%, systems utilize piston pumps equipped with linear encoders and offer repeatable motion control to within 0.003 in. and variable speed operation. Products can have working area from...

Read More »
XYZ Dispensing System is programmed with Palm(TM) handheld.
Dispensers

XYZ Dispensing System is programmed with Palm(TM) handheld.

Ultra TT Automation Series, suited for automated tabletop assembly processes, allows benchtop bonding, gasketing, and filling operations to be programmed with Palm(TM) handheld. GUI software provides control of positioning and dispensing parameters and simplifies setup, while closed-loop servo controls and drive motors enable precise positioning of dispensing tip. System is offered with 325 x 325...

Read More »
XYZ Dispensing System is programmed with Palm(TM) handheld.
Dispensers

XYZ Dispensing System is programmed with Palm(TM) handheld.

Ultra TT Automation Series provides benchtop bonding, gasketing, and filling operations which are programmed using Palm(TM) handheld. Intuitive GUI software offers control of positioning and dispensing parameters. System is offered with 325 x 325 mm or 525 x 525 mm work envelopes. Accurate programming combined with closed-loop servo controls, and powerful drive motors allow fast, precise...

Read More »
Dispensers

Hot Melt Dispensers have controllable temperature zones.

Loctite® Hysol® Bulk-12, Bulk-14, and Bulk-34 hot melt dispensers feature 12, 14, and 34 lb tank capacities, respectively. All models offer high-volume extrusion, spray or swirl options, and internal system diagnostics. Products may be outfitted with stand-alone controllers or PLCs for varying levels of automation. Reservoirs are PTFE coated, while high surface area melt grid...

Read More »
Foam Kits include temperature-sensing strip.
Foamers

Foam Kits include temperature-sensing strip.

VERSI-FOAM® 2-component, disposable kits, with U-CONTROL® dispensing guns, include liquid-crystal temperature-sensing strip to assist user in knowing when chemical temperatures are suitable for optimal use. Mid-size kits are packaged with hoses attached to tank valves. User simply flips open top, snaps on mixing nozzle, opens valves, and sprays.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers