New Foam Soap Dispensers from Bradley Doubles the Number of Hand Washes per Fill
Bradley Corp new full line of foam soap dispensers are designed to save up to 50% in soap costs per year compared with liquid soap. Foam soap, which creates a richer, lather-like foam, provides more coverage and lessening the amount of soap needed per wash. Due to wash and quick lathering and rinsing, foam soap reduces soap usage, water consumption and all of its related costs. The new...
Read More »
New MIXPAC MixCoat Dispensing Systems are Designed for Railway Applications
MIXPAC™ MixCoat™ Dispensing Systems are available in manual and spray models. MixCoat™ Manual model is used for stripe coating and comes with unique brush assembly. Unit’s cartridges are available for 1:1, 2:1, 3:1 and 4:1 ratios ranging from 1500 mL to 940 mL. MixCoat™ Spray model consists of cartridges, mixer and pneumatic operated spray dispenser and features dial and settings on the...
Read More »
Sulzer Launches MIXPAC™ MixCoat™ Dispensing System for Small Volume Applications
MIXPAC™ MixCoat™ Dispensing System consists of DPS Spray Dispenser, cartridges, mixer and the pneumatic operated spray. Unit used for applying solid epoxies and abrasion-resistant coatings on pipes and transportation equipment, bores, walkways, and conveyor equipment. The system comes with cartridges ranging from 1500mL to 940mL for 1:1, 2:1, 3:1 and 4:1 ratios. Unit features dials and...
Read More »
Helios™ Automated Dispensing Systems Support Highly Abrasive Thermal Interface Materials
Helios™ SD-960 Series Automated Dispensing Systems are designed for volume deposits of single- (1K) and two-component (2K) materials in electronics manufacturing and printed circuit board assembly. These systems deposit volumes in the range from 1cc to 3cc, line widths and dots below 1mm. Helios system features Fluidmove® software and dispense valves or Nordson 1k- or 2k-metering systems....
Read More »
Site Amenities & Furnishings: Key Considerations When Sourcing A High-Volume Manufacturer
This white paper looks at the six key considerations when sourcing a high-volume manufacturer of site amenities and furnishings. Download now to find out more.
Read More »
Large Format Dispensing System
The RD 2500 is the most flexible large format dispensing table available. It combines a smart work bench to a built in precision overhead servo XYZ gantry system. Mechanism are neatly tucked in and do not add to the width of the bench. This provides easy access from front, sides, and top requiring less operator “reach” to the center of the table. Another unique design feature is the T-Slot...
Read More »
MIXPAC™ MixCoat™ Spray Coating Dispensing System features dual stage trigger.
MIXPAC™ MixCoat™ Spray Coating Dispensing System is suitable for touch-up and repairs, pipeline repair and field joint coating applications. Unit comes with cartridges, mixers and pneumatic operated spray. This lightweight product’ settings and dials are available on the handle and offers 1:1, 2:1, 3:1 and 4:1 ratios. Dispensing system is compatible with single line and dual line flex hoses...
Read More »
MIXPAC™ MixCoat™ Flex Protective Coating Dispensing System features dual stage trigger.
MIXPAC™ MixCoat™ Flex Protective Coating Dispensing System is available in single flex line and dual flex line options. Unit is suitable for tanks and bilges in marine environments and water/wastewater manhole applications. Product can be mounted on a wall or ground. Featuring 90 degree tip for spraying in tight angles and straight tip for broader areas, dispensing system can adjust to 1:1,...
Read More »
TriggerBond Dispensing System features static mixers.
TriggerBond Dispensing System features cartridges and dispensing guns. Unit helps user to increase production and offers less mixing errors. Cartridges are available in 50ml, 200ml and 400ml volumes and are suitable for bonding, sealing, or small potting applications. Cartridges offer consistent mix ratio and enables operator to apply air-free mixture directly into a cavity.
Read More »
Nordson SEALANT EQUIPMENT Introduces a Comprehensive New Range of Products that Drive Customer Productivity and Quality
Pro-Meter® V2K – a compact, cost-effective and precision 2 component meter that’s big on reliability and massive on precision. Featuring positive rod displacement technology, important when accuracy is vital and performance is essential. Pro-Meter® H2K, A2K and D2K meter range for 2 component materials. Powered by our positive rod displacement metering technology, delivering precision as...
Read More »
AutoBlock® Fill is integrated with Masterflex® peristaltic pump.
Suitable for laboratories for metal digestion process, AutoBlock® Fill can dispense from up to five reagents bottles at a time. Controlled using onboard touch screen or connecting a computer with the included software, unit’s five-way valve eliminates need for swapping out reagent bottles while switching digestion methods. Product is offered in standard-sized fume hoods or environmental...
Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »
