Miscellaneous Dies

Modules and Tools enable Braille embossing.

Used inline at printing press or offline in converting system, Embossing Modules and Tools are applicable for both web and sheet fed processes, in wide variety of materials including paper, board, and laminates. Braille set is comprised of negative segment that includes all possible 288 Braille positions and positive segment, which holds changing Braille embossing patterns.

Read More »
Miscellaneous Dies

Case Study: Justifying the Prototype Die

Using cost-effective precision tooling to offset hand fabrication The term prototype die" is almost an oxymoron. Usually, it isn't quite cost-effective to precision tool a 400 lb block of tool steel to produce less parts than most people have fingers. Problem Recently, a customer presented KLH Industries, Inc. with an opportunity to satisfy that very same condition: create a precision-tooled form...

Read More »
EDI Develops Advanced Layer Multiplier That Is Simpler, More Accurate, and More Versatile Than Any Other Microlayer System
Miscellaneous Dies

EDI Develops Advanced Layer Multiplier That Is Simpler, More Accurate, and More Versatile Than Any Other Microlayer System

Completely the Product of EDI Engineering, New Layer Multiplier Is Supplied without Royalty and Installs in Existing Production Lines with Minimal Modification CHIPPEWA FALLS, WI, U.S.A., July 29, 2009: A completely new layer multiplier enables producers of cast film and sheet to obtain the substantial property enhancements of microlayer structures yet is easier to deploy, more compact, more...

Read More »
Flat Dies withstand exposure to HCl.
Miscellaneous Dies

Flat Dies withstand exposure to HCl.

Flat dies with DuraCoat(TM) coating withstand most attacks from corrosive hydrochloric acid (HCl) generated in course of extruding PVC. Coating forms thin film on steel surface of die that has no effect on features machined into flow surfaces. Solution is insolubile in most acids and bases, and also withstands burn-outs without damage.

Read More »
Serapid, Inc to Exhibit at Metalform Mexico
Miscellaneous Dies

Serapid, Inc to Exhibit at Metalform Mexico

Serapid, Inc will showcase their complete line of Quick Die Change equipment - clamps, roller bars, bolster extensions, push-pull systems and die carts and transfer systems at booth #1417 at the MetalForm Mexico show June 2-4, 2009 at Cintermex in Monterrey. Featured in their exhibit are the BTSC Rod clamps and the TBHS escaping arc clamp. The BTSC Rod Clamp is compact, easy to handle, and...

Read More »
Miscellaneous Dies

Saudi Converter to Add Second Davis-Standard Line

March 30, 2009 (Fulton, N.Y.)--Obeikan Investment Group of Riyadh, Saudi Arabia, recently purchased a new stretch film line from Davis-Standard, LLC to accommodate the company's global business expansion. As one of the largest converters in the Middle East, Obeikan is a leader in the liquid packaging, flexible film, publishing and printing markets. The new line, slated for a June 2009...

Read More »
Miscellaneous Dies

Davis-Standard's Lab Equipment/Capabilities Address Down Economy

March 18, 2009 (Pawcatuck, Conn.)--During NPE, Davis-Standard, LLC will exhibit examples of laboratory equipment that provide customers with cost-effective R&D solutions. These include the small, but powerful Killion KLT extruder and a laboratory-size blown film line. Davis-Standard will also provide information about JMC Killion Laboratories in Houston, Texas. The Killion KLT extruder is back at...

Read More »
Miscellaneous Dies

Foam Capabilities Highlighted at NPE

March 18, 2009 (Pawcatuck, Conn.)--Davis-Standard, LLC will promote its more than 40 years of foam extrusion expertise at NPE. Foam extrusion is an especially viable process for present economic conditions as foam products are lightweight and low density, conserving both materials and energy. This cost-effective means of production is especially effective for manufacturing sheet or board for...

Read More »
Fasnap® Corp. Offers New Dies for Electric Kick Press Machine
Miscellaneous Dies

Fasnap® Corp. Offers New Dies for Electric Kick Press Machine

Fasnap® has introduced three new die sets to work with the electric kick press. For easier installation, cutting dies are now available for the One-Way-Lift® socket and clinch plate. New setting dies make attaching the SnapFast® product line simple, quick and uniform. Lastly, attaching the 4-prong eyelet and plain washer in the turn button fastener line just became easier with a...

Read More »
Underwater Pelletizer Dies eliminate die-hole freeze-off.
Miscellaneous Dies

Underwater Pelletizer Dies eliminate die-hole freeze-off.

Pelletizer die designs incorporate 15% patented additives, boron, and ceramic in medium-grain tungsten carbide material. Alloy is used for solid ring or segmented construction of 0.240 in. thick die face. Dies allow melt up to 650°F to flow through die holes and cold water down to 34°F to contact cutting surface without die-hole freeze off. Melt leaves the die holes and enters the...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers