Carver and Wabash at ATCE 2013 Show
Miscellaneous Dies

Carver and Wabash at ATCE 2013 Show

Carver, Inc. and Wabash MPI are exhibiting at the ATCE 2013 show in Booth Number 429 from September 30 – October 2, 2013 at the Ernest N. Morial Convention Center in New Orleans, LA.Â- On display at the show will be Carver’s Model CMG28-12 PCR proppant crush test press and crush die. The proppant crush test press is for use with (frac) sand, resin coated sand and ceramic proppant...

Read More »
Miscellaneous Dies

BOBST Folding Carton Showcased at IADD*FSEA Odyssey

BOBST North America Inc. presented our latest Folding Carton equipment technological advancements and service innovations at the IADD*FSEA Odyssey Show on May 1-3, 2013 at the Nashville Convention Center in Nashville, Tennessee. Over 800 visitors attended this event and were able to see the NEW BOBST EXPERTCUT 106 PER diecutter reaching top speeds of 9,000 sheets per hour in the IADD/FSEA Odyssey...

Read More »
Miscellaneous Controls

DME Back at Amerimold 2013 Showcasing Efficiency and Precision

Stop by Booth #305 to See Extensive Moldmaking Supplies Offer On June 11-12, you'll find DME in Booth #305 at amerimold 2013 a trade show, technical conference and networking event in Rosemont, IL, that connects mold manufacturing and plastic injection molding. A leading manufacturer of mold technologies, DME will be featuring products from their extensive moldmaking supplies offer including:...

Read More »
Nordson EDI to Show Most Sophisticated Epc(TM) Extrusion Coating Die to Date, Reducing Downtime and Controlling Edge Bead
Miscellaneous Dies

Nordson EDI to Show Most Sophisticated Epc(TM) Extrusion Coating Die to Date, Reducing Downtime and Controlling Edge Bead

Patent-Pending System Makes It Possible to Clean Inside the Die Lip without Removing Deckle Components, Cutting Time from an Hour or More Down to 5 Minutes CHIPPEWA FALLS, WI - Guided by feedback from converters worldwide, Nordson EDI has completely re-engineered its widely used EPC™ edge bead-reducing extrusion coating die, yielding a more robust system that is even easier to operate and cuts...

Read More »
Miscellaneous Dies

Henkel's Pre-cut Conductive Die Attach Film Expands Advantage

Breakthrough Technology Wins Important Industry Award Since its market introduction four months ago, Henkel Electronic Materials’ LOCTITE ABLESTIK CDF 200P pre-cut conductive die attach film has enjoyed broad market success in a very short amount of time. Now, the technology breakthrough has been further validated by its recent win of a Global Technology Award. “Device manufacturers around...

Read More »
KS Tooling, Inc. Provides High Speed Stamping for the Medical Device Industry
Miscellaneous Dies

KS Tooling, Inc. Provides High Speed Stamping for the Medical Device Industry

One of our customers manufactures lifesaving EPI pens. Before they came to us they were stamping the pens using gap frame presses with die speeds of 100 to 150 strokes per minute. They had a successful product, so they were looking to scale up production. Their strategy was to purchase additional presses and dies. With a strong desire for higher speed presses, our client contracted a world class...

Read More »
Miscellaneous Dies

Wilson Tool Introduces Tooling for Salvagnini Punching Systems

WHITE BEAR LAKE, MINN. - Wilson Tool International (www.wilsontool.com) now offers tooling for Salvagnini high-precision punching systems. The company manufactures a complete range of punches, dies and strippers, including standard and custom shapes. Designed to enhance the performance of Salvagnini punching systems, Wilson Tool's punches and dies are manufactured with high-speed steel for...

Read More »
Miscellaneous Dies

Printed Circuits, Inc. Makes Equipment, Process and Plant Cleanliness Upgrades

Moving from 2012 into 2013 brings a recommitted interest in improving PCi's product and capabilities. Printed Circuits, Inc. (Minneapolis, MN) has made a number of upgrades to improve their products. Items of note are a new die punch, a new conveyorized microetch line, improvements to the lamination layup clean room, and an overhaul of the HVAC system. The new die punch frees up a significant...

Read More »
Miscellaneous Dies

Polymar to Represent Argotec's Polyurethane Film & Sheet in Europe

GREENFIELD, MA, USA -- Argotec, Inc., of Greenfield, Massachusetts U.S.A. today announced their reaching agreement with polymer marketing specialists Polymar bvba of Antwerp, Belgium to represent the company in Europe, including the former Eastern European countries and the United Kingdom, effective January 1, 2013. Polymar will sell Argotec's complete line of blown and flat-die extruded,...

Read More »
Miscellaneous Dies

Serapid Designs a Custom Quick Die System for a Michigan Manufacturer

STERLING HEIGHTS, Mich.- Serapid USA has produced a custom quick die change system for a Midwest manufacturer. The manufacturer of modular agricultural storage buildings was looking to automate a die change system comprised of one dedicated refurbished press with two bump style dies. The company was experiencing lengthy change times using a forklift, as well as storage issues for the dies. To...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers