Miscellaneous Dies

Interchangeable Dies increase power crimp tool efficiency.

Single set of standard hand tool dies for all 3 Sta-Kon® power crimp tools offers interchangeability, consistent crimping, and inventory reduction. Dies are compatible with BAIR22-6 Bench-Top Air Tool, PAIR22-6 Portable Air Tool, and BAT22-6 Battery-Powered Hand Tool, all of which crimp insulated and non-insulated terminals from 22-6 AWG. Full crimp cycle is completed in under 1 sec with...

Read More »
Miscellaneous Dies

Multi-Manifold Slot Dies help eliminate contamination.

Suited for proximity coating of fluids onto web substrates, dual- and triple-manifold Ultracoat® dies replace multi-stage processes with single-pass coating. They enable converters to use single die to apply 2 or more coatings simultaneously, avoiding oxidation and contamination coatings can undergo between stages. Product is used in process that pre-meters coating fluid at constant rate...

Read More »
Miscellaneous Dies

Die Service rebuilds and refurbishes dies.

Targeted for sheet, film, coating, lamination, blown film, pipe, and extrusion dies, program includes disassembly and cleaning of die, stripping of plating, and polishing of all flow areas to 6-8 rms. In addition, seal surfaces are ground to .0005 in., feed openings are machined to accommodate grind stock removal, die internals are plated to .001 in., and all other exposed areas are flash plated...

Read More »
Die Table Segments optimize tablet production.
Miscellaneous Dies

Die Table Segments optimize tablet production.

Designed to minimize downtime for refitting, resetting, and cleaning, Die Table Segments replace entire standard die table surface plate on tablet press turrets. They eliminate need for dies and die lock screws, and only 10 fasteners are required for installation of 5 segments for 75 stations. Segments also help minimize product loss and wear and tear, and are suited for pharmaceutical and...

Read More »
Light Dies eliminate slug pulling.
Miscellaneous Dies

Light Dies eliminate slug pulling.

Slug-Free Light Dies are suited for punching thin sheet metal where recommended die clearance is less than 0.008 in. Units punch stainless steel up to 0.032 in. thick, mild steel up to 0.040 in., and aluminum up to 0.048 in. thick. During each punching cycle, die uses small angled notch to create protrusions around edge of slug. As slug passes through die, position of protrusion relative to notch...

Read More »
Rack Dies meet demands of automotive industry.
Threading Dies

Rack Dies meet demands of automotive industry.

Manufactured to end-user specifications and applications, OSG Rack Dies are suited for rolled parts that require precision splines and worm gears. Simultaneous thread and spline rolling rack dies are also available. Available in sizes up to 60 in. long, rack dies can be manufactured from materials such as D2, tool steel, and M2 and M42 steels. Thickness tolerances are held to ±0.0004 in.,...

Read More »
Die Stamper is available with sensor kits.
Miscellaneous Dies

Die Stamper is available with sensor kits.

Models HCCU-60 and HCCU-150 in Dyne-A-Cam® Nitro-Cam(TM) Series are available with respective sizes of 6Â-¾ and 16¾ tons. Products, offered with sensor kits for positioning, can be mounted at any angle in die and retrofit to existing dies. Features include constant force through stroke, built-in mechanical stop for exact cam stroke, and no fluid pressure at die open. Other...

Read More »
Service provides part development.
Miscellaneous Dies

Service provides part development.

Utilizing double-sided, continuous extrusion, blow molding machine and related auxiliary equipment, Heise Industries provides part development service from initial part design to finished blow molded component. Company handles all sampling and quick-to-market bottle development projects.

Read More »
Extrusion Die suits shear sensitive/low viscosity materials.
Miscellaneous Dies

Extrusion Die suits shear sensitive/low viscosity materials.

Design of Multiflow(TM) Cascade Extrusion Die provides identical shear history for all material processed, regardless of position across die. Distribution of material is accomplished by directing rather than restricting flow at various locations in die. Dies can be produced for strand, strip, round, or flat applications. They are also available for color striping or co-extrusion applications.

Read More »
Universal Dies/Die Heads are suited for in-place threading.
Machining Heads

Universal Dies/Die Heads are suited for in-place threading.

Manufactured from tool steel, dies are designed to fit Wheeler-Rex Quick-Opening Universal Die Head and other proprietary die head models and are available in Pipe Dies for NPT, NPT for SS, NPSM, and Bolt Dies. Suited for in-place threading from Â-½-2 in., 12R Style Drop Heads and Dies are manufactured from alloy steel and are available in NPT and NPSM, with or without heads. All 12R style...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers