Techcon Systems to Demonstrate New TS9200D Series Jet Tech Valve at the IPC APEX EXPO
Garden Grove, CA- Techcon Systems, a product group of OK International and a leading provider of fluid dispensing systems and products, will demonstrate the soon-to-be released TS9200D Series Jet Tech valve in Booth #735 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. Scheduled for release in March, the TS9200D Series...
Read More »
Dust Collector Diaphragm Valves have springless design.
Suited for use with Series DCT1000 and Series DCT500 duct collection timer boards, Series DCS/RDCS offer option for coupling or NPT connections. Coupling connection facilitates installation, requiring only stub pipe and blowtube to be cleaned and deburred before valve is fit into position. T-Series DCS has female threaded connections, while C-Series DCS has coupling connection. Both have 90Ã-
Read More »CE Stamp for Hygienic Diaphragm Valves
Top Line announces that its full line of hygienic diaphragm valves has recently been evaluated and certified to carry the CE stamp for use in the European Union. The size ranges currently available are 1/4 through 4 tube size bodies with manual and pneumatically automated top works. FDA and USP Class VI diaphragms available include peroxide cured EPDM, FDA VitonÃ-®, TFM/EPDM, and...
Read More »
Diaphragm Action Valve works with UV resins and adhesives.
Suited for dispensing applications, Model DV509-UV-LF features wetted chamber compatible with low- to medium-viscosity UV materials. Diaphragm seal is attached to solenoid that opens upon receiving air signal from valve controller. Diaphragm flexes to allow fluid to exit for duration that seal is opened, and return spring snaps diaphragm shut after air signal is removed. Valve is rated at 200...
Read More »
Must-Ask Questions When Choosing a Foam Control Agent
This eBook discusses foam controlling agents and how to find the right one for your needs.
Read More »Diaphragm Valve suits aggressive chemical applications.
Constructed with all-wetted, high-purity PTFE components, 2-way Model SDV is available in sizes from Ã-¼ through 1 in. with manual or pneumatic actuation. End connections include standard flare, pillar, Flowell, and NPT designs. In addition to chemical applications, valve is also suited for high-end semiconductor applications.
Read More »Valves resist corrosion, contamination, and clogging.
Diaphragm Isolated Solenoid Valves Series SV 51 and SV 73 use flexible diaphragms to isolate operating parts from fluid being handled, eliminating metal-to-fluid contact. Available in 2-way NC and NO as well as 3-way configurations, seal materials include Viton, EPDM and TeflonÃ-®. Standard voltages are 24 Vdc and 115 Vac/60 Hz, while pressures range from vacuum to 100 psi and flow rates up...
Read More »
Solenoid Valve offers zero leakage in liquid and gas.
Direct-acting solenoid valve, Model HKL5 is 12.6 mm wide, with 0.05 Cv flow rate, 1.8 W power consumption, and pressure rating from vacuum to 30 psig. It can be used as 2-way or 3-way NO/NC standard fill/exhaust valve, or as selector or diverter. Mounted on manifold or sub-base, diaphragm-poppet valve has no sliding seals, no metal-to-metal contact, and requires no lubrication. Solenoid features...
Read More »
Diaphragm Valves are rated for over 1 million cycles.
Constructed of 316L Stainless Steel, MonelÃ-®, and HastelloyÃ-® C-276, D-Series diaphragm process analyzer system valves are available with hand wheel, Ã-¼ turn, pneumatic, and Fieldbus-compatible electropneumatic actuation methods. Products come in standalone (tube or pipe), multi-stream manifold, and ANSI/ISA-76 compliant SMT models with working pressure range of vacuum to 3,600...
Read More »
Shut-Off Valves suit liquid service from vacuum to 150 psi.
With no wetted metals or external fasteners, Ã-½ in. Series BSR is designed for high-purity or corrosive environments. Backpressure can be as high as inlet pressure without affecting performance. Diaphragm style valves use compressed air for operation and will close in event of pressure loss. Valve bodies are unpigmented polypropylene or grade 1, type 1 PVC. Internal metal springs are...
Read More »
Diaphragm Valve dispenses wide variety of chemicals.
Measuring 1.06 in. dia x 3.45 in. long, Model TS5622VU-DVD dispenses low-medium viscosity fluids and delivers consistent deposits over range of shot and bead sizes. Stainless steel fluid housing ensures compatibility with variety of chemicals, particularly those used in manufacture of DVDs and CDs, such as UV cure adhesives, resins, and lacquers. With max fluid pressure of 70 psi, valve operates...
Read More »
ISO-Certified Plastic Injection Molding from Rodon
The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.
Read More »
