New DeviceNet Components Products

DeviceBus Cables suit industrial networking environments.

Featuring TPE jackets and low temperature performance, IndustrialTuff DeviceBus 1345F and 1346F Cables offer resistance to weld splatter, oil, solvents, and abrasion in harsh industrial environments. Units combine data and power functionality in single cable and can be used for either trunk or drop applications, depending on system speed and overall end-to-end distance. Cables are RoHS compliant...

I/O Module connects pushbuttons to Devicenet(TM).

With IP67-rated, built-in DeviceNet eurofastÃ-® connector, FDN20 DeviceNet station fits into any standard pushbutton enclosure. Screw terminals are accessible from inside enclosure, and unit powers I/O from DeviceNet. Model FDN20-4S-4XSG-E has 4 dedicated inputs and 4 inputs or outputs and can handle following I/O mixes: 8 in, 7 in/1 out, 6 in/2 out, 5 in/3 out, or 4 in/4 out.

Interface Adapter expands DeviceNet(TM) capabilities.

Coupled with POINT I/O(TM), 1734-ADNX DeviceNet network interface adapter, with subnet expansion, provides control, configuration, and data-collection capabilities for industrial devices. It increases reach of DeviceNet to 1,500 m and, depending on scanner capability, to more than 126 nodes per scanner. Top connector connects adapter to main DeviceNet network and to controller scanner module....

DeviceNet Cable allows small bend radius.

ChainflexÃ-® CF13 combines communication with control in one twisted-pair, continuous-flex bus cable with 10x diameter flexibility. It meets meets specific requirements of OVDA DeviceNet standards. PUR jacket provides resistance to abrasion, oil, cooling fluids, and other harsh environments. Cable can be used safely without interference near strong electromagnetic DC fields. Data transmission...

Gauge Application Guide

This white paper provides a gauge application guide to help you in selecting the right gauge for your needs.

Bus Station suits DeviceNet(TM) and PROFIBUS-®-DP networks.

AIM ST Module, busstopÃ-®, mounts directly on motor control enclosures to provide I/O, power, and network signals to inside and outside enclosure. Product offers up to 8 dry contactor inputs and outputs. From outside enclosure, signals are accessed via 5-Pin eurofastÃ-® or 4-Pin and 5-Pin minifastÃ-® connectors. Rear screw terminals provide clean way to get power and DeviceNet(TM)...

Connectivity and DeviceNet(TM) Solution connects e-stop devices.

E-connect(TM) plug-and-work solution connects traditional e-stop devices and safety relay modules. Station operates in background to monitor where stop was initiated and annunciates system status. Able to be used on any DeviceNet system, product is available to connectorize 1, 2, and 8 e-stop devices. It isolates safety circuits form auxiliary power and DeviceNet communications circuits. E-stops...

Smart DeviceNet Slave provides troubleshooting abilities.

Model DRT2 provides capabilities for monitoring I/O and network communications status. Unit allows users to remotely monitor and diagnose low network voltage, communications errors, and short circuits for connected devices, providing preventative maintenance abilities. DRT2 monitors number of operations and total operation time and can provide notification when maintenance is required. Expansion...

I/O and Network Adapter connects to fieldbus.

D77A-DNA Adapter provides interface to connect IT. I/O and IT. Motor Control devices to DeviceNet system and automatically configure devices. Modules also provide on-board regulation of 24 Vdc, eliminating need for separate I/O power supply in many applications. Modules have removable terminal blocks with retention/extraction locks; backplane and cable interconnect system; optical isolation of...

DeviceNet Cable can be routed next to power lines.

Brad Harrison(R) 600 V-rated DeviceNet cable lets installers of DeviceNet machine communications systems route both trunk (THICK) and drop (THIN) cabling adjacent to 600 V-rated power cabling for tray or raceway use. Variety of connectors can be configured using this cable, including male and female Mini-Change(R) and Micro-Change(R) connectors and receptacles.

Message Displays offer networking capabilities.

InView(TM) Message Displays feature DeviceNet(TM) and Ethernet network communication modules, which allow users to connect displays into new or existing plant networks, eliminating serial protocol connections. Users can receive messages from variety of sources, triggering real-time messages for plant floor communication such as production data, process status and alarms, as well as general...

Industry Leading OEM with over 65 Years of Experience

Blonder Tongue Laboratories provides ISO 9001:2015 certified electronic contract manufacturing services at our on-site lab. We specialize in video distribution, fiber optics, and communications but have a variety of services available to bring your products to market. See our video to learn more.