Air Dryers lower dewpoint without moving parts or electricity.
Suited for use in flammable and hazardous environments where explosions or fires are of concern, Balston IT Series Membrane Air Dryers produce dewpoint of 35°F and lower while removing all other compressed air contaminants down to 0.01 micron. Wall-mountable and explosion-proof units, used to dehydrate and purify compressed air, offer flow rates up to 100 scfm and are shipped with...
Read More »Regenerative Compressed-Air Dryers
Lake City, PA, U.S.A. - Van Air Systems now offers the model MHL" series heatless, regenerative air-drying system. MHL compressed-air dryers provide maximum protection within all OEM packages, laboratory and point-of-use applications. A -40Â-ºF to -100ºF pressure dew point and flow capacities from 3 scfm to 35 scfm assure the best air quality for your requirements. For more...
Read More »First Scientific Comparison of Resin Dryers Shows Why Industry Will Shift to New, More Efficient Drying Systems
As Only Supplier of All Dryer Types, NOVATEC Predicts Major Move from Twin-Bed to Wheel Dryers, Plus Strong Growth for Vacuum and Membrane Systems BALTIMORE, MD, U.S.A., June 18, 2007: Building on its position as the only manufacturer of every type of resin drying system used in the plastics industry, NOVATEC, Inc. recently began scientifically rigorous comparative testing of its drying...
Read More »
New Type of Resin Dryer Eliminates Moving Parts and Desciccant, Cuts Maintenance and Operating Cost, Enhances Part Quality
Unique, Commercially Proven Maguire® NovaDrier(TM) Compressed Air / Membrane System Will Make European Debut at Maguire Europe Exhibit during K-2007 TAMWORTH, STAFFORDSHIRE, UK, June 27, 2007: Highlighting the Maguire Europe exhibit at K-2007 will the introduction to the European marketplace of the world's only compressed air / membrane resin dryer, a system so simple and efficient that it...
Read More »
Deploying Commercial Electronics in Rugged Environments
This white paper explores how Commercial Off-the-Shelf components can be used efficiently and cost-effectively in critical military applications.
Read More »
Rotating Wheel Dryer dries resin and regenerates desiccant.
Offered to resin processors as alternative to twin-tower dryers, NovaWheel(TM) Dryer continuously puts dry desiccant into service while regenerating saturated desiccant in same rotational cycle. Models, available for 45-2,270 kg/hr, use steel link drive chain to drive cylindrical wheel, which contains desiccant-impregnated honeycomb divided into 3 sections. Consistent dew point performance is...
Read More »Membrane Air Dryers offer quiet operation.
RequBalston® IT Series Membrane Air Dryers provide pure, dry compressed air at dewpoint of 35°F and flow rates from 1 to 50 scfm. They remove all compressed air contaminants down to 0.01 micron in size. Without any moving parts, units come with prefilters, auto drains, and membrane modules, and require no electricity.
Read More »Flow Dry Technology to Exhibit at Mobile Air Conditioning Society Convention and Trade Show
BROOKVILLE, OH (December 14, 2006)-Flow Dry Technology, Inc., a leading manufacture of gaskets and desiccant bags, announces that they will be exhibiting at the MACS Convention and Trade Show in Phoenix, Arizona from February 2-3, 2007. Flow Dry will be introducing new products at this years show. One of the new products that Flow Dry is very excited about is their new Dry-Denser(TM) package for...
Read More »
Cost and Quality Benefits of Membrane Resin Dryer are Now Available in Models Designed for Medical Molders
ANAHEIM, February 13, 2007: The advantages of the world's only membrane resin dryer are now available in models designed especially for injection molders of micro and precision components for medical devices, it was announced today at MD&M West by NOVATEC, Inc. (Booth 3939). The company's NovaDrier(TM) system dries virtually any type of resin, and thousands of the system have been sold....
Read More »
Automated Bulk Solids Handling System Increase Productivity, Market Growth
CHESHIRE, UK -- Multisorb Technologies Inc. increased productivity at its new European facility for producing silica gel granule adsorption packets with an automated multi-line bulk solids handling system that simultaneously feeds four form/fill/seal machines. The system, under PLC control, consists of a bulk bag discharger, four flexible screw conveyors, and four feed hoppers gravity discharging...
Read More »ExxonMobil and QuestAir Technologies Address Increased Hydrogen Needs in the Refining Industry
FAIRFAX, Va. & BURNABY, B.C.-May 2, 2006-ExxonMobil Research and Engineering Company ( EMRE") and QuestAir Technologies Inc. (AIM:QAR) (TSX:QAR) announced today that they have signed an agreement to jointly market a novel, large capacity hydrogen purifier as a compact solution for hydrogen recovery in the oil refining industry. QuestAir has been working with EMRE since 2003 to develop this...
Read More »
Eliminate Expensive Repairs with the Hot-Shot Pipe Thawing Machine
The new Hot Shot Pipe Thawing Machine delivers an innovative and highly effective approach to thawing frozen pipes. Easy to use and versatile, it is loaded with robust features that further suit it to many challenging environments. To learn all about it, see our video.
Read More »
