Water Deburring Center allows multi-part processing.
Parts Washing Equipment

Water Deburring Center allows multi-part processing.

Jet-Clean Center 4-axis high-pressure deburring center clears chips and burrs from machined components. Large 20 x 12 x 12 in. XYZ-work area permits large part capacity and/or multi-part processing. Using 5,000 psi water and nozzle technology, unit blasts and dislodges compacted chips and debris from blind, tapped and cross holes and passages. Traveling at sonic velocities to 1,100 ft/sec, water...

Read More »
Deburring System is designed for work cell environments.
Deburring Machines

Deburring System is designed for work cell environments.

Requiring 92 ftÂ-² of floor space, Model V-24TF self-contained, vibratory finishing system features built-in material handling equipment and screener that separates parts from finishing media. It has 24 ft³ capacity, urethane-lined finishing tub and 875-2000 VPM vibration frequency. Sound hoods cover entire length of machine, keeping noise level below 85 dba. Features include...

Read More »
Single Station System offers part deburring and cleaning.
Deburring Machines

Single Station System offers part deburring and cleaning.

Model EC-20-1 combines Electrolytic Deburring/Edge Finishing/Contouring system and Aqueous Cleaning system. Both are modular and constructed with stainless steel and non-corrosive materials. In combination, systems provide accurate deburred, edge finished or contoured parts that are aqueous-cleaned and dried. Multiple fixtures are provided for load/unload parts handling. Finished parts can be of...

Read More »
Pneumatic Deburring Tool suits robotic applications.
Deburring Tools

Pneumatic Deburring Tool suits robotic applications.

Flexdeburr(TM) 340 features floating motor and spindle arrangement that provides deburring tip's radial compliance to perform consistently on irregular part patterns. It is mounted to robot or CNC machine and requires clean, dry, filtered, non-lubricated air. Tool uses one air connection at 90 psi to spin cutting file, and second at 60 psi to apply radial force. Motor's internal governor...

Read More »
Deburring System deburrs short parts in one pass.
Deburring Machines

Deburring System deburrs short parts in one pass.

Bradex® semi-automatic, double head, flow-through system simultaneously deburrs both ends of short extrusions, measuring from 1-3 in. in length. Each of four 12 or 14 in. disc brushes is driven by 3 hp motor, which are mounted on tool slides for precise alignment of brushes to ends of parts. Variable speed, manually-fed conveyor system allows for deburring rates up to 1,200 parts/hr.

Read More »
Thermal System instantly vaporizes burrs and flash.
Deburring Machines

Thermal System instantly vaporizes burrs and flash.

Large-capacity, 5-station EURO-TEM P-350 Thermal Energy Method system deburrs cast-iron, steel, stainless steel, brass, and aluminum parts, and deflashes zinc parts, completely eliminating burrs and flash internally and externally without parts wear, media or metallurgical change. Parts from 8 in. dia x 7 in. deep to 12.5 in. dia x 12 in. deep are accommodated. While parts are being...

Read More »
Deburring Machine safely deburrs wide variety of parts.
Deburring Machines

Deburring Machine safely deburrs wide variety of parts.

VORTEX High-Energy deburring machine features adjustable gap system between Tuff Tank and rotating bottom, allowing operator to make adjustments for smaller media and parts so machine can be kept in tight tolerance. It is fully programmable for complete process control. Machine offers inifinite speed control and ability to run variety of media including ceramics, plastic, sintered, natural,...

Read More »
Deburring Tool deburrs cross-drilled holes.
Deburring Tools

Deburring Tool deburrs cross-drilled holes.

ORBITOOL(TM) removes burrs specifically from intersection of holes. Operation can be tailored to leave minimally broken edge or blended radius. Tool is used like any cutting tool found on lathe turret or tool magazine of machining center. It can deburr non-circular features and is suitable for process control environment.

Read More »
Deburring Center clears chips from critical components.
Deburring Machines

Deburring Center clears chips from critical components.

Jet-Flex 4-axis deburring machine, with 20 x 12 x 12 in. XYZ work area, permits large part capacity and/or simultaneous multi-part processing. Water pressure blasts and dislodges compacted chips and debris. Pumping station is equipped with Triplex Positive Displacement pump, capable of producing water pressure to 5,000 or 10,000 psi. All deburring operations are controlled by G-code programming...

Read More »
Deburring Tools

Chamfering Tool removes burrs and creates clean edges.

TKA 300-0 machines all kinds of contours, straight and round. Around corners, users can cut either 45° angle or radius edges. Chamfer length can be preset using manually- adjustable setting wheel and locked to desired dimension. Maximum chamfer length is 0.125 in., mild steel. Unit includes twin-blade tool system and vibration dampening. Three-way reversible cutter inserts and 45°...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers