Air-Powered Pencil Grinder features variable speed design.

Air-Powered Pencil Grinder features variable speed design.

Providing adjustable speed from 35,000–60,000 rpm, Variable Speed Pencil Grinder offers precision deburring, finishing, and engraving. Tool features non-slip ergonomic grip, one-touch pushbutton for on/off operation, and overhose assembly that helps direct air away from operator. Spindle Lock with through-hole enables quick accessory change with no need for 2 wrenches. Supplied with 1/8 in....

Read More »

Deburr Parts in Continuous Production without Part on Part Contact

The DL1000 can offer continuous throughput of a part every few seconds without part on part contact. Parts are vibratory deburred, cleaned and sharp edges removed in 10-15 minute process times, using Ceramic Media and Vibra-Glo Compound. The machine has a small footprint requiring less than 7 square meters of floor area. Email spaleck@vibra.com or call Doug Bradshaw 905 366-8281 for more...

Read More »

Deburr Small Flat Parts Using the Power of Centrifugal Finishing

Our technology is ideal for finishing, deburring and burnishing of small flat metal parts that have a tendency to stick together. It is also suitable for thin delicate parts. This process offers 100% batch security as there is no mixing of parts. Centrifugal Finishing can be used for the manufacture of coin blanks for the Mint Industry. Email spaleck@vibra.com or call Doug Bradshaw 905 366-8281...

Read More »
Deburring System features machine-compatible design.

Deburring System features machine-compatible design.

Customized for application-specific abrasive filament brushes, Tri-Ten Series accepts precision ground parts, in carriers, directly from grinding, lapping, or honing machine. As magnetized belt grips parts in carrier, they are presented to planetary head, where three 10 in. abrasive filament brushes deburr upward facing surface. Edge break, surface finish, and material removal are accurately...

Read More »
Pressure Washing and Deburring Machines handle simple and complex parts.

Pressure Washing and Deburring Machines handle simple and complex parts.

Comprised of 5 modular and fully programmable machines, JET CLEAN CENTER line is designed for precision washing and deburring of simple and complex parts. Products include CLEANRISER automated Millipore patch reading system as well as JCC drying equipment that uses plant or regenerative air or vacuum technology. Depending on machine, common base, stainless steel enclosure, and internal 3-axis...

Read More »
Heavy-Duty Tube Fabrication Tools aid small bore tube assembly.

Heavy-Duty Tube Fabrication Tools aid small bore tube assembly.

Suited for CPI(TM) and A-LOK-® tube fittings, hand-operated tools include tube benders with indexing handle for -¼, 3/8, and -½ in. tubing sizes and calibration markings for left-hand, right-hand, and offset bends. Tube cutter for 1/8 and 1 1/8 in. stainless steel, steel, soft, copper, and aluminum tubing is also included, along with deburring tool for 3/16-1-½ in. OD tubing. Inspection gauge...

Read More »
Portable Welding End Prep Tool features optimized ID clamping.

Portable Welding End Prep Tool features optimized ID clamping.

Suited for end prepping single water wall boiler panel tubes, air-powered Ground MILLHOG-® requires 1 -½ in. radial clearance and features clamp rib assembly that incorporates captive internal band and smooth clamp ribs. Design facilitates removal of ID clamping tool from tube; it will not catch on burrs and is unaffected by repetitive cycling. Totally sealed for use in any orientation,...

Read More »
Deburring Tool is suited for use with thick turrets.

Deburring Tool is suited for use with thick turrets.

Mate Rollerball Deburr(TM) tool, available in thick turret and Trumpf Style versions, allows operators to perform punching/deburring of materials in one step. System utilizes Rollerball(TM) technology that uses programming capabilities of presses that operate in X and Y axes with ram down. Ball in both upper/lower sections of tool allows every part contour to be processed. Three springs that...

Read More »

Kennametal Extrude Hone Redesigned TEM S250 Machine

New Machine Design Showcases Technical Innovations and Promotes Greater Levels of Customization while Remaining Budget Friendly Irwin, Pa. (January 09, 2009)-In these uncertain economic times, Kennametal Extrude Hone offers customers interested in its distinctive Thermal Energy Method (TEM) technology the greatest value and production flexibility for the price point with the newly enhanced TEM...

Read More »

All Topics