Deburring / Deflashing Services

Deburring System handles high volume fineblanked parts.
Applicator / Finishing / Cleaning Brushes

Deburring System handles high volume fineblanked parts.

Capable of annual throughput of >15 million parts, Tri-Ten deburring system can be bulk fed by operator/robot or fed directly by upstream press. Vision System stops machine if parts are improperly loaded, and- 3 planetary head system removes burrs on parts from 3–0.40 mm thick. While three 254 mm flap discs on first head removes primary stamping burr, six 254 mm application-specific...

Read More »
Deburring System handles high volume fineblanked parts.
Applicator / Finishing / Cleaning Brushes

Deburring System handles high volume fineblanked parts.

Capable of annual throughput of >15 million parts, Tri-Ten deburring system can be bulk fed by operator/robot or fed directly by upstream press. Vision System stops machine if parts are improperly loaded, andÂ- 3 planetary head system removes burrs on parts from 3–0.40 mm thick. While three 254 mm flap discs on first head removes primary stamping burr, six 254 mm...

Read More »
ATI Industrial Automation to Exhibit New Products and Solutions at Automate 2013, Chicago, January 21-24
Force Sensors / Transducers

ATI Industrial Automation to Exhibit New Products and Solutions at Automate 2013, Chicago, January 21-24

ATI Industrial Automation, a world-leading, engineering-based developer of robotic peripheral equipment, including Automatic Tool Changers, Multi-Axis Force/Torque Sensing Systems, Utility Couplers, Robotic Deburring Tools, Robotic Collision Sensors and Compliance Devices, will exhibit new products and solutions at Automate 2013, Booth #640, McCormick Place North, Chicago, Illinois, January...

Read More »
ATI Industrial Automation to Exhibit New Products and Solutions at Automate 2013, Chicago, January 21-24
Force Sensors / Transducers

ATI Industrial Automation to Exhibit New Products and Solutions at Automate 2013, Chicago, January 21-24

ATI Industrial Automation, a world-leading, engineering-based developer of robotic peripheral equipment, including Automatic Tool Changers, Multi-Axis Force/Torque Sensing Systems, Utility Couplers, Robotic Deburring Tools, Robotic Collision Sensors and Compliance Devices, will exhibit new products and solutions at Automate 2013, Booth #640, McCormick Place North, Chicago, Illinois, January...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Deburring Machines

VibraHone CB-30 Centrifugal Barrel

For aggressive deburring or high luster finishing the CB-30 may be the perfect machine. With speeds up to 220 rpm these machine can deburr parts 5-10 times faster than standard vibratory equipment. For high luster polishing the VibraHone CB series may be just what you need. In many cases a Centrifugal Barrel finishing can eliminate the need for hand polishing. To see the results of a VibraHone CB...

Read More »
Deburring Machines

VibraHone CB-30 Centrifugal Barrel

For aggressive deburring or high luster finishing the CB-30 may be the perfect machine. With speeds up to 220 rpm these machine can deburr parts 5-10 times faster than standard vibratory equipment. For high luster polishing the VibraHone CB series may be just what you need. In many cases a Centrifugal Barrel finishing can eliminate the need for hand polishing. To see the results of a VibraHone CB...

Read More »
Titanium

RPA Creates Process for Deburrring Beta C Titanium

RP Abrasives' process is quick, efficient and based on bead blasting or shot blasting. The process is more than four times faster than traditional hand deburring methods. By using a special media and low-pressure blasting techniques, RPA can remove all of the burrs without changing or damaging complex shapes and surfaces. This method does not interfere with nondestructive test methods, which are...

Read More »
Titanium

RPA Creates Process for Deburrring Beta C Titanium

RP Abrasives' process is quick, efficient and based on bead blasting or shot blasting. The process is more than four times faster than traditional hand deburring methods. By using a special media and low-pressure blasting techniques, RPA can remove all of the burrs without changing or damaging complex shapes and surfaces. This method does not interfere with nondestructive test methods, which are...

Read More »
Cryogenic Services

Nitrofreeze® Cryogenic Deburring Service Expands to Implantable PEEK Medical Devices

The Cryogenic Institute of New England, Inc. is proud to announce the capability of removing machine burrs from PEEK medical devices including implants. The Nitrofreeze® cryogenic deburring service has recently undergone trials by medical device manufacturers to remove burrs from PEEK implants. The results reveal that the Nitrofreeze® cryogenic deburring process is highly effective at removing...

Read More »
Cryogenic Services

Nitrofreeze-® Cryogenic Deburring Service Expands to Implantable PEEK Medical Devices

The Cryogenic Institute of New England, Inc. is proud to announce the capability of removing machine burrs from PEEK medical devices including implants. The Nitrofreeze-® cryogenic deburring service has recently undergone trials by medical device manufacturers to remove burrs from PEEK implants. The results reveal that the Nitrofreeze® cryogenic deburring process is highly effective at...

Read More »

All Topics