DC to DC Power Supplies (Converters)

DC-DC Step-Up Converter provides buck-boost functionality.
DC to DC Power Supplies (Converters)

DC-DC Step-Up Converter provides buck-boost functionality.

With continuous transition between boost and regulated buck mode, Model AS1337 is suited for single or dual cell applications. Unit offers adjustable output voltage from 2.5-5.0 V from input voltage of 0.65-4.5 V. From 2-cell battery with 1.8-3.6 V voltage range, Model AS1337 provides 200 mA of output current at 3 V. Operating from -40 to +85°C, converter offers efficiencies up to 97% and...

Read More »
DC-DC Converter provides 1.8 A for applications processors.
DC to DC Power Supplies (Converters)

DC-DC Converter provides 1.8 A for applications processors.

Housed in 2.0 x 2.0 x 0.65 mm wafer-level package, Model MAX8649 achieves initial accuracy of ±0.5% at 1.27 V and total accuracy of better than ±2% over load, line, and temperature, allowing processors to run at max clock speed. Synchronous, fixed-frequency step-down converter operates from input supply as low as 2.5 V to support deep-discharge battery chemistries. IÂ-²C...

Read More »
Semi-Regulated Bus Converters offer 6 power levels.
DC to DC Power Supplies (Converters)

Semi-Regulated Bus Converters offer 6 power levels.

Suited for intermediate bus architecture applications, SQ60 Series accepts full Telco input range of 36-75 V and provides semi-regulated 12 V for point-of-load converters. Units incorporate board-mountable, fixed switching frequency technology, and use synchronous rectification to achieve full load power conversion efficiencies approaching 96%. Available in eighth-, quarter-, and half-brick...

Read More »
DC/DC Converter IC offers fast transient times.
DC to DC Power Supplies (Converters)

DC/DC Converter IC offers fast transient times.

Model MB39A145, 2-channel DC/DC converter IC utilizes bottom detection comparator method that compares output voltage to reference voltage using high-speed comparator, minimizing variations in output voltage when load is high. Pulse Frequency Modulation function reduces power that is used during operation below 100 mA or in stand-by mode. Operating in temperatures from -30 to +85°C, unit...

Read More »
Choosing the Right Material for Your Project
Sponsored

Choosing the Right Material for Your Project

When choosing an appropriate metal material, the range of options is so broad that selecting the correct material for your unique application can be challenging. Different metals have characteristics that can affect weldability, ductility, and formability. Our new eBook outlines the unique properties and applications of popular metals including: Stainless Steel Brass Aluminum Copper Titanium

Read More »
DC to DC Power Supplies (Converters)

DC/DC Converter features integrated boost diode.

Operating from 4.3-38 V input voltage, Model LT3971 features Burst Mode® operation, which keeps quiescent current under 2.8 Â-µA in no load standby conditions. Internal 2.4 A switch can deliver up to 1.2 A of continuous output current to voltages as low as 1.19 V. Switching frequency is user programmable from 200 kHz to 2 MHz. Housed in 10-lead 3 x 3 mm DFN-10 package, step-down...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Controller offers differential output voltage sensing.

Operating with all N-channel MOSFETs from 4.5-38 V input voltages, Model LTC3855 produces output voltages from 0.6-12.5 V with ±0.75% accuracy. Dual output, synchronous step-down controller provides up to 95% efficiency. Up to 12 phases can be paralleled and clocked out of phase to minimize I/O filtering requirements for applications up to 200 A. Fixed operating frequency can be programmed...

Read More »
DC to DC Power Supplies (Converters)

For Higher Capacity and Greater Grid Stability: Siemens to Expand HVDC Link in New Zealand

Siemens Energy has received an order from Wellington-based Transpower New Zealand Limited, the national grid operator, to modernize and increase the capacity of the existing high-voltage direct-current (HVDC) link between the country's North and South Island. For the Inter Island Connector Pole 3" HVDC project Siemens will supply two turnkey converter stations and replace the aging converters...

Read More »
DC/DC Converters have MTBF of 3,500,000 hr.
DC to DC Power Supplies (Converters)

DC/DC Converters have MTBF of 3,500,000 hr.

Featuring 6,000 Vdc I/O isolation, G series and H series of 1 W converters consume nominal input voltages of 5 or 12 Vdc, which step up/down to produce single or dual output voltages of 5, 9, 12, and 15 Vdc. Available in SIP or DIP through-hole packages, units have efficiency up to 75%, and and full load operation is specified from -40 to +85°C. UL60950-1 approved, RoHS compliant units...

Read More »
DC/DC Converters feature 15 W psi in 2 x 1 in. package.
DC to DC Power Supplies (Converters)

DC/DC Converters feature 15 W psi in 2 x 1 in. package.

RoHS compliant, 30 W DC/DC converters, AM30EW-Z offer input/output isolation of 1,600 Vdc to protect load circuit from transient voltage surges present at input of converter. Units have input range between of 9-36 and 18-75 Vdc, MTBF of 3.2 mil hr with soft start, remote ON/OFF control and cold start up temperature of -40°C. Single, dual and triple outputs include 3.3, 5, 5.1, 12 and 15...

Read More »
AC/DC Modules combine safety approvals, 78% efficiency.
DC to DC Power Supplies (Converters)

AC/DC Modules combine safety approvals, 78% efficiency.

Operating from 85-260 Vac or 110-370 Vdc input, UL60950-1 approved LD03 Series comes in PCB-mount, encapsulated package for test and measurement, industrial control, communications, and consumer electronic products. Input to output isolation of 4,000 Vdc and EN60601-1 safety approvals on LD05 Series suit patient vicinity medical device designs. Both RoHS-compliant switching power supplies offer...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics