DC to DC Power Supplies (Converters)

DC/DC Controller drives all N-channel power MOSFET stages.
DC to DC Power Supplies (Converters)

DC/DC Controller drives all N-channel power MOSFET stages.

Housed in thermally enhanced 3 x 3 mm QFN-16 package, LTC3775 synchronous step-down DC/DC switching regulator controller features 4.5-38 V input range and 30 ns minimum on-time. Onboard MOSFET gate drivers allow use of high-power external MOSFETs to produce output currents up to 20 A with output voltages ranging from 0.6 to 80% of input voltage. Constant-frequency, leading edge modulation,...

Read More »
DC/DC Converters maximize regulation/efficiency performance.
DC to DC Power Supplies (Converters)

DC/DC Converters maximize regulation/efficiency performance.

Providing full-load performance across -40 to +85°C temperature range, MER1 Series isolated 1 W single-output DC/DC converters are available in 5 input voltages ranging from 5-48 V and output voltages of 5, 9, 12, or 15 V. Typical efficiency levels are up to 89%, while galvanic isolation of 1 kVdc helps minimize switching noise. Fully encapsulated 0.774 x 0.242 x 0.4 in. units utilize UL...

Read More »
DC to DC Power Supplies (Converters)

Step-Down DC/DC Converter delivers up to 800 mA.

Featuring programmable average input current limit, Model LTC3606B delivers up to 800 mA of continuous output current with efficiencies up to 96%. Using constant frequency and current mode architecture, unit operates from input voltage of 2.5-5.5 V, making it suited for single-cell Li-Ion and USB applications. Device can generate output voltages from 0.6-5 V and uses switching frequency of 2.25...

Read More »
8 W DC/DC Power Converter offers 4:1 input ranges.
DC to DC Power Supplies (Converters)

8 W DC/DC Power Converter offers 4:1 input ranges.

Supplied in DIP24 package, AM8TW-Z series offers 9-36 and 18-75 Vdc input ranges and remote ON/OFF control suited for portable, battery-powered applications. Single and dual output voltages of 3.3, 5, 12, and 15 Vdc, accurate to ±1%, require no minimum load and feature over-voltage, over circuit projection, and tight line/load regulation of ±0.2%/±0.5%. Also, I/O isolation of...

Read More »
Converters cover nominal input voltages of 12, 24 or 48 Vdc.
DC to DC Power Supplies (Converters)

Converters cover nominal input voltages of 12, 24 or 48 Vdc.

Housed in metal package, high power density 15 W JTK15 and 30 W JTL30 series accept either 9-36 or 18-75 Vdc inputs. JTK15 series comes in single or dual output models, and measures just 1 x 1 x 0.39 in., while JTL30 series has footprint of 2 x 1 x 0.4 in., and offers single, dual or triple output options. Units feature input to output and input/output to case isolation of 1,600 Vdc for up to 1...

Read More »
PoL DC/DC Converters come in 10 A and 16 A models.
DC to DC Power Supplies (Converters)

PoL DC/DC Converters come in 10 A and 16 A models.

Accepting input voltage of 2.4-5.5 Vdc, 10 A and 16 A Okami OKY and OKX Series come in surface mount and through-hole SIP formats, respectively. Units have programmable output voltage from 0.7525-3.63 Vdc and are based on fixed-frequency synchronous buck converter switching topology for efficiencies up to 95%. Operating from -40 to +85°C, RoHS-compliant converters can drive up to 1,000...

Read More »
DC to DC Power Supplies (Converters)

LED Driver delivers over 20 A continuous current.

Synchronous step-down DC/DC converter LT3743 operates from 5.5-36 V input and provides up to 20 A continuous LED current from nominal 12 V input. In pulsed LED applications, it can deliver up to 40 A of LED current or 160 W from 12 V input. Efficiencies as high as 95% eliminate need for external heat sinking, frequency is programmable from 100 kHz to 1 MHz, and topology enables it to transition...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Boost Converters feature current-limiting switch.

Model TPS2500 synchronous DC/DC boost converter features pulse-skipping mode for high efficiency at light loads, while TPS2501 operates at fixed-frequency across load range for EMI-sensitive systems. Units offer current limiting range from 0.13-1.4 A and meet 5 V USB power requirements from 1.8-5.25 V input. Output current limit can be programmed via external resistor from 130-1,400 mA. Onboard...

Read More »
DC/DC Converters accommodate 4:1 input range.
DC to DC Power Supplies (Converters)

DC/DC Converters accommodate 4:1 input range.

Housed in metal package, 15 W Series JTK15 and 30 W Series JTL30 cover nominal input voltages of 12, 24, or 48 Vdc and accept 9-36 or 18-75 Vdc inputs. JTK15 Series, measuring 1 x 1 x 0.39 in., is available in single or dual output models, while JTL30 Series measures 2 x 1 x 0.4 in. and offers single, dual, or triple output options. Suited for mobile, portable, and wireless products, encapsulated...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers