DC to DC Power Supplies (Converters)

DC-DC Step-Up Converter provides buck-boost functionality.
DC to DC Power Supplies (Converters)

DC-DC Step-Up Converter provides buck-boost functionality.

With continuous transition between boost and regulated buck mode, Model AS1337 is suited for single or dual cell applications. Unit offers adjustable output voltage from 2.5-5.0 V from input voltage of 0.65-4.5 V. From 2-cell battery with 1.8-3.6 V voltage range, Model AS1337 provides 200 mA of output current at 3 V. Operating from -40 to +85°C, converter offers efficiencies up to 97% and...

Read More »
DC-DC Converter provides 1.8 A for applications processors.
DC to DC Power Supplies (Converters)

DC-DC Converter provides 1.8 A for applications processors.

Housed in 2.0 x 2.0 x 0.65 mm wafer-level package, Model MAX8649 achieves initial accuracy of ±0.5% at 1.27 V and total accuracy of better than ±2% over load, line, and temperature, allowing processors to run at max clock speed. Synchronous, fixed-frequency step-down converter operates from input supply as low as 2.5 V to support deep-discharge battery chemistries. IÂ-²C...

Read More »
Semi-Regulated Bus Converters offer 6 power levels.
DC to DC Power Supplies (Converters)

Semi-Regulated Bus Converters offer 6 power levels.

Suited for intermediate bus architecture applications, SQ60 Series accepts full Telco input range of 36-75 V and provides semi-regulated 12 V for point-of-load converters. Units incorporate board-mountable, fixed switching frequency technology, and use synchronous rectification to achieve full load power conversion efficiencies approaching 96%. Available in eighth-, quarter-, and half-brick...

Read More »
DC/DC Converter IC offers fast transient times.
DC to DC Power Supplies (Converters)

DC/DC Converter IC offers fast transient times.

Model MB39A145, 2-channel DC/DC converter IC utilizes bottom detection comparator method that compares output voltage to reference voltage using high-speed comparator, minimizing variations in output voltage when load is high. Pulse Frequency Modulation function reduces power that is used during operation below 100 mA or in stand-by mode. Operating in temperatures from -30 to +85°C, unit...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Converter features integrated boost diode.

Operating from 4.3-38 V input voltage, Model LT3971 features Burst Mode® operation, which keeps quiescent current under 2.8 Â-µA in no load standby conditions. Internal 2.4 A switch can deliver up to 1.2 A of continuous output current to voltages as low as 1.19 V. Switching frequency is user programmable from 200 kHz to 2 MHz. Housed in 10-lead 3 x 3 mm DFN-10 package, step-down...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Controller offers differential output voltage sensing.

Operating with all N-channel MOSFETs from 4.5-38 V input voltages, Model LTC3855 produces output voltages from 0.6-12.5 V with ±0.75% accuracy. Dual output, synchronous step-down controller provides up to 95% efficiency. Up to 12 phases can be paralleled and clocked out of phase to minimize I/O filtering requirements for applications up to 200 A. Fixed operating frequency can be programmed...

Read More »
DC/DC Converters have MTBF of 3,500,000 hr.
DC to DC Power Supplies (Converters)

DC/DC Converters have MTBF of 3,500,000 hr.

Featuring 6,000 Vdc I/O isolation, G series and H series of 1 W converters consume nominal input voltages of 5 or 12 Vdc, which step up/down to produce single or dual output voltages of 5, 9, 12, and 15 Vdc. Available in SIP or DIP through-hole packages, units have efficiency up to 75%, and and full load operation is specified from -40 to +85°C. UL60950-1 approved, RoHS compliant units...

Read More »
DC/DC Converters feature 15 W psi in 2 x 1 in. package.
DC to DC Power Supplies (Converters)

DC/DC Converters feature 15 W psi in 2 x 1 in. package.

RoHS compliant, 30 W DC/DC converters, AM30EW-Z offer input/output isolation of 1,600 Vdc to protect load circuit from transient voltage surges present at input of converter. Units have input range between of 9-36 and 18-75 Vdc, MTBF of 3.2 mil hr with soft start, remote ON/OFF control and cold start up temperature of -40°C. Single, dual and triple outputs include 3.3, 5, 5.1, 12 and 15...

Read More »
Mini POL Converter delivers up to 6 A of output current.
DC to DC Power Supplies (Converters)

Mini POL Converter delivers up to 6 A of output current.

Offered in 0.394 x 0.220 x 0.472 in. SIP package, FPDK12TR8006PSV converter operates from 5.6-14 Vdc input and provides regulated programmable output voltage from 0.8-6.6 Vdc. It delivers up to 6 A of output current at power density exceeding 950 W/cu.-in. Single input converter does not required external Vcc (bias) supply for operation. RoHS compliant product features remote ON/OFF, over-current...

Read More »
DC/DC Controller drives all N-channel power MOSFET stages.
DC to DC Power Supplies (Converters)

DC/DC Controller drives all N-channel power MOSFET stages.

Housed in thermally enhanced 3 x 3 mm QFN-16 package, LTC3775 synchronous step-down DC/DC switching regulator controller features 4.5-38 V input range and 30 ns minimum on-time. Onboard MOSFET gate drivers allow use of high-power external MOSFETs to produce output currents up to 20 A with output voltages ranging from 0.6 to 80% of input voltage. Constant-frequency, leading edge modulation,...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers