DC to DC Power Supplies (Converters)

Isolated Flyback DC/DC Controller operates up to 150°C.
DC to DC Power Supplies (Converters)

Isolated Flyback DC/DC Controller operates up to 150°C.

With input range of 5-100 V, Model LT3748H operates in boundary mode, current-mode control switching scheme, resulting in ±5% typical regulation over full line, load, and temperature range. Device facilitates design of isolated DC/DC converter since there is no requirement for opto-isolator, third winding, or signal transformer for feedback. Housed in MSOP-16 package, IC drives external...

Read More »
Step-Down DC/DC Controller offers differential output sensing.
DC to DC Power Supplies (Converters)

Step-Down DC/DC Controller offers differential output sensing.

Available in 3 x 4 mm QFN-20 or TSSOP-20E packages with input range of 4.5-38 V, Model LTC3833 features controlled on-time, valley current-mode architecture that forces fast transient response by increasing operating frequency during transient event. Onboard N-channel MOSFET gate drivers allow use of external MOSFETs for load currents up to 25 A in applications with output voltages from 0.6-5.5...

Read More »
Step-Down DC/DC Controller drives 5 V logic level MOSFETs.
DC to DC Power Supplies (Converters)

Step-Down DC/DC Controller drives 5 V logic level MOSFETs.

Featuring input voltage of 2.7-5.5 V or 4-38 V, Model LTC3852 includes onboard charge pump that provides 5 V bias to drive low RDS(ON) and standard logic-level power MOSFETs from 3.3 V nominal supply. Output currents up to 25 A can be supplied over output voltage range from 0.8 V to 99% of VIN, making controller suited for 3.3 V-powered point-of-load applications. Constant-frequency current-mode...

Read More »
Synchronous Step-Down DC/DC Controller draw as little as 50 µA.
DC to DC Power Supplies (Converters)

Synchronous Step-Down DC/DC Controller draw as little as 50 µA.

Supplied in 20-pin 3 x 4 mm QFN and 20-lead TSSOP, LTC3891 operates from 4-60 V input supply range that protects against high-voltage transients and continues operation during automotive cold crank. Output voltage can be set from 0.8-24 V at output currents up to 20 A with efficiencies as high as 95%. Operating with selectable fixed frequency from 50-900 kHz, IC is synchronizable to external...

Read More »
5 Questions to Ask When Choosing a Custom Glass Manufacturer
Sponsored

5 Questions to Ask When Choosing a Custom Glass Manufacturer

Due to the inherent complexity of glass fabrication, many professionals seeking glass services know exactly what kind of part is needed, but are unclear on the intricacies of the actual manufacturing process. PEG's exclusive guide is designed to help professionals navigate the custom glass manufacturing process with valuable information.

Read More »
DC-DC Converters provide single output, isolated to 1 kVdc.
DC to DC Power Supplies (Converters)

DC-DC Converters provide single output, isolated to 1 kVdc.

Measuring 8.2 x 8.4 x 8.5 mm, MTU1 Series features power density of 1.71 W/cmÂ-³ and wide temperature performance of -40 to 85°C at full 1 W load. Open frame units are available in 8 models offering choice of 5 or 12 V input voltage and 5, 9, 12, or 15 V output voltage. Compliant with RoHS directive, surface mount converters are suited for industrial, test and measurement, and process...

Read More »
DC to DC Power Supplies (Converters)

Synchronous Boost Controller eliminates need for heat sink.

Replacing boost diode with N-channel MOSFET, LTC3786 step-up DC/DC controller consumes 55 Â-µA quiescent current and can produce 24 V @ 5 A output from 12 V input with up to 98% efficiency. It operates from 4.5-38 V during start-up and maintains operation down to 2.5 V after. Able to regulate output voltages up to 60 V, IC employs 1.2 Ohm N-channel MOSFET gate drivers. Phase-lockable...

Read More »
DC to DC Power Supplies (Converters)

LED Driver supports automotive headlamp cluster functions.

Suitable for high-beam, low-beam, and daytime running light circuits, Model BD8381EFV-M controls dimming without PWM output. Current-mode buck/boost controller provides stable operation over 5-30 V input range and removes constraints on number of LEDs in series connection. In addition to integrated protection that monitors voltage, current, and temperature, IC includes LED open and short circuit...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Converter starts up with inputs as low as 250 mV.

Incorporating Maximum Power Point Control, Model LTC3105 operates over input range of 0.2-5 V, making it suited for harvesting energy from photovoltaic cells, TEGs, and fuel cells. Internal 400 mA synchronous switches maximize efficiency while Burst Mode® operation offers quiescent current of 22 Â-µA. Auxiliary LDO delivers up to 6 mA to power external microcontrollers and sensors...

Read More »
Ericsson Wins 5th Award from Electronic Products China for Ultra Wide Input Power Module
DC to DC Power Supplies (Converters)

Ericsson Wins 5th Award from Electronic Products China for Ultra Wide Input Power Module

o Recognition for PKM5000D that simplifies radio base station design o Single product powers systems from 18V to 75V, reducing inventory while increasing flexibility and reducing cost o Versatile - also suitable for industrial applications Ericsson Power Modules has won a top 10 DC/DC power modules award from Electronic Products China magazine for the 5th time, once again recognising the...

Read More »
DC/DC Converters feature 4:1 input and remote on/off.
DC to DC Power Supplies (Converters)

DC/DC Converters feature 4:1 input and remote on/off.

Requiring 1.31 x 1.01 x .40 in. of board space, surface mount SMW Series offers 5 W of fully regulated output power and nominal input voltages of 24 and 48 Vdc. Units provide single outputs of 3.3, 5, 12, and 15 Vdc as well as dual outputs of ±5, ±12, and ±15 Vdc. Encapsulated with thermally conductive potting compound in non-conductive plastic case, RoHS-compliant converters...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers