DC/DC Converter Modules have 18-75 Vdc input range.
Modular FEC40 Series converters provide output power of 40 W and accept 2:1 wide range inputs from 18-75 Vdc. Available in 18 models, they are offered with single, dual, and triple outputs from 3.3-15 Vdc. All models provide short circuit protection, OVP, on/off control, internal input filter, and 1,600 Vdc I/O isolation. Ambient operating temperature range is -40 to +50Ã-
Read More »Multi-Phase DC/DC Controllers support 40-120 A.
Series TPS4009x synchronous, DC/DC buck controllers manage 2, 3, or 4 phases and can operate each phase at switching frequency up to 1 MHz, resulting in ripple frequency up to 4 MHz at input and output in 4-phase applications. Single-chip, PWM devices include current sense fault protection, programmable over current protection, and individual phase current detection. They offer more than 90%...
Read More »Step-Up DC/DC Converter has Schottky diode and soft start.
Housed in 6-lead ThinSOT(TM) package, LT3461/A combines 40 V, 300 mA (ISW), low VCESAT (260 mV) switch that delivers efficiencies to 84% with onboard Schottky diode and soft-start capability. Using constant frequency and current mode architecture, it operates from 2.5-16 V input voltage. Constant switching frequency of 1.3 or 3 MHz enables low noise operation and use of ceramic capacitors and...
Read More »DC/DC Boost Converters have linear regulation functionality.
Utilizing synchronous rectifier based on PWM controller, TPS6102x family of synchronous, 1.5 A switch DC/DC boost converters provide up to 96% power conversion efficiency from input voltage range of 0.9-5.5 V. ICs can operate in down-mode with linear regulation if input voltage reaches or exceeds output voltage. Available in 10-pin, 3 x 3 mm QFN package, products have power save mode, 25 Ã-µA...
Read More »Checklist: How to Get the Right Belt the First Time
This guide is intended to help identify and address application criteria necessary to specify the right belt to deliver a highly efficient, reliable product.
Read More »Step-Down Converters provide up to 95% power efficiency.
Series TPS6222x consists of 400 mA, synchronous DC/DC converters that support input voltage from 2.5-6 V, output voltage of 6 V down to 0.7 V, and output current up to 400 mA. They operate with fixed switching frequency of 1.25 MHz. In Power Save Mode, switching frequency is reduced and quiescent current is typically 15 Ã-µA. Converters come in 5-pin ThinSOT-23 package and are suited for...
Read More »DC/DC Converters feature efficiencies to 91%.
Utilizing multilayer/PCB planar magnetics, Series HB provides up to 200 W of output power at currents to 80 A. Available in single, dual, and triple outputs from 1.5-13 Vdc, units offer input ranges of 18-36 and 36-75 Vdc. They include input under-voltage lockout, output OVP, and over-temperature protection. Line/load regulation is Ã-
Read More »DC-DC Converters feature power factor correction.
Series AIF-PFC surface-mount converter modules are parallel-configurable and can deliver up to 1,600 W of power from input range of 85-264 Vac. They offer power densities up to 290 W/inÃ-³. Embedded functions provide monitoring, protection, and adjustment capabilities as communication bus that can store end user information. Units operate from 40-100Ã-
Read More »DC/DC Step-Down Controllers are 95% efficient.
Non-synchronous TPS6420x series controllers conserve battery life in battery-powered applications with input voltages from 1.8-6.5 V that must be stepped down to regulated voltage to 1.2 V and provide output currents from 1-3 A. Housed in 6-pin SOT-23 packages, devices feature quiescent current of 20 Ã-µA and drive external P-channel MOSFET. Products use minimum on-time and off-time control...
Read More »Synchronous Boost Converter has 5 A switch current.
Low-profile LTC3425 incorporates 4-phase switching topology, operates at frequencies up to 8 MHz, and delivers output voltages of up to 5.25 V from input voltage range of 0.5-4.5 V. It provides up to 3 A continuous output current from 32-lead, 5 x 5 mm QFN package with less than 2 mm profile. Internal switches deliver efficiencies as high as 95%. Automatic or manual Burst ModeÃ-® operation...
Read More »Isolated DC/DC Controller integrates opto drive.
Model LT3804 is a 100 W, secondary side, DC/DC regulator for dual output isolated power supplies. Housed in 28-lead TSSOP package, it converts 36-72 V supplies to output voltages of 5, 3.3, 2.5, 1.5, and lower at up to 50 W per output. Differential Kelvin voltage sensing is used for each output feedback. Model LT3804 operates with switching frequencies from 200-800 kHz. It contains error...
Read More »TPA Motion Introduces Industry's First Compact Robotic Positioner for Medical Devices
TPA Motion's microplate handling robots are designed specifically for medical instruments and lab automation devices. Check out the video to learn more.
Read More »