DC to DC Power Supplies (Converters)

Half-Brick DC/DC Converters feature 24 or 48 Vdc input bus.
DC to DC Power Supplies (Converters)

Half-Brick DC/DC Converters feature 24 or 48 Vdc input bus.

Offering power densities that reach 169 W/in.Â-³, single-output H0331 seriesÂ- helps maximize output power delivered in space-constrained industrial, telecom, and data networking systems. Output levels reach 336 W/21 A, and ultra-low leakage inductance magnetics allow power efficiency figures from 88% to 90% (depending on operating conditions). Lending to MTBF of 4.1 Mhr, multi-layer,...

Read More »
Three-Phase PFC and DC/DC Converter enhances data center efficacy.
DC to DC Power Supplies (Converters)

Three-Phase PFC and DC/DC Converter enhances data center efficacy.

Operating from 3-phase, 480 Vac input, 5 kW PFC converter (MPA9535) providesÂ- 380 Vdc output and ensures PFC is as close as possible to unity. Power conversion efficiency is up to 96% typ. Fed directly from MPA9535, matching high input voltage 1,200 Watt DC-DC converter (MPA9512)Â- hasÂ- 2 DC outputs: 12.12 Vdc (main)Â- andÂ- +5 Vdc (standby). This stage of power conversion...

Read More »
DC/DC Converters comply with DOSA 16th brick footprint, interface.
DC to DC Power Supplies (Converters)

DC/DC Converters comply with DOSA 16th brick footprint, interface.

Cool Power Technologies 16th brick DC/DC converter series comprises open frame modules that provide up to 50 W of output power at voltages of 1.8, 3.3, 5.0, and 12 Vdc. Suited for distributed power architecture applications or as fully regulated intermediate bus converter, fixed-frequency products offer 9–36 Vdc input range, provide 2,250 Vdc input to output isolation, and measure 1.3 x 0.9 in....

Read More »
Medical, UPS-Ready, ATX Power Supply incorporates battery charger.
DC to DC Power Supplies (Converters)

Medical, UPS-Ready, ATX Power Supply incorporates battery charger.

Operating from universal 90–264 Vac- input with active PFC or 24 Vdc input, TMPC-650U medically approved PC power supply offers total output power of 650 W max; combined output of +3.3 V and +5 V is limited to 150 W. One 24 V or two 12 V lead-acid batteries can be connected for use as interruptible power source without affecting overall max output power. DC voltage outputs and max loads are...

Read More »
DC-DC Converters feature 4:1 input range.
DC to DC Power Supplies (Converters)

DC-DC Converters feature 4:1 input range.

WithÂ- input voltage range of 9–36 Vdc, Cool Power Technologies 16th Brick DC-DC Converters provide up to 50 W of output power at output voltages of 1.8, 3.3, 5.0, and 12 Vdc. Open frame modulesÂ- offer 2,250 Vdc input to output isolation, meet EN 60950 basic insulation requirements, and are UL94 V-O flammability rated. Measuring 1.3 x 0.9 in. with max height of 0.37 in., DOSA-compliant...

Read More »
Ultravolt-® GMA Series Still Available
DC to DC Power Supplies (Converters)

Ultravolt-® GMA Series Still Available

The Original GMA Series of Proportional DC to DC HV Supplies FromÂ- LHV Power Formerly Known as Hitek Power Corporation Still Available From UltraVolt RONKONKOMA, New York – UltraVolt, Inc., a world-leading manufacturer of high-voltage power supplies and high-voltage power systems, announced today that the microsize HV bias supply line, the GMA Series, is still available. The original GMA...

Read More »
COTS DC-DC Power Sources deliver 600 W or 1,000 W.
DC to DC Power Supplies (Converters)

COTS DC-DC Power Sources deliver 600 W or 1,000 W.

OpenVPX and Vita 62 compliant, 600 W Behlman VPXtra™ 1000CM accepts 28 Vdc input and delivers outputs of 12 Vdc at 40 A, 5 Vdc at 24 A, 3.3 Vdc at 15 A, -12 Vdc at 2 A, and +12 Vdc at 1 A. Line and load regulation are 0.5% and 1.0%, respectively. Accepting 28 Vdc input, VPXtra™ 1000CD provides up to 1,000 WÂ- of regulated 12 Vdc output power and 3.3 Vdc auxiliary power.Â- Both...

Read More »
DC/DC Converters meet medical safety standards.
DC to DC Power Supplies (Converters)

DC/DC Converters meet medical safety standards.

Meeting 2x MOPP and IEC/EN 60601-1 3rd Edition medical safety standards, THM-WI series includes 3, 6, and 10 W power classes in DIP-24 package with reinforced insulation. Models are available with 3.3, 5, 12, 24, -±5, -±12, and -±15 Vdc fully regulated single or dual outputs and 4:1 input ranges of 4.5–9 Vdc, 9–36 Vdc, and 18–75 Vdc. Along with efficiency up to 90%, features include- 

Read More »

All Topics