DC to DC Power Supplies (Converters)

DC to DC Power Supplies (Converters)

RF DC/DC Switching Converters extend smartphone battery life.

Designed to minimize power consumption of RF power amplifiers across all operating conditions, Model LM3242 supports up to 1 A and is compatible with 3G/4G applications, while Model LM3243 supports up to 2.5 A and is compatible with 2G/3G/4G applications. Devices dynamically adjust power delivered to PA based on how much power is actually needed. Both ICs achieve 95% efficiency and feature...

Read More »
SMT 3-20 A PoL Converters have fully optimized control loops.
DC to DC Power Supplies (Converters)

SMT 3-20 A PoL Converters have fully optimized control loops.

Compliant with 2nd Generation DOSA standards, DOSA-2 non-isolated DC/DC converters do not require any external tuning components and feature edge plated castellation pads that facilitate SMT solder joint inspections. There are 4 series - iCF, iCG, iBF, and iAF - with respective output current/power ratings of 3 A/16.5 W, 6 A/33 W, 12 A/66 W, and 20 A/110 W. All operate with 4.5-14 V input and...

Read More »
DC/DC Converters meet rail and industrial standards.
DC to DC Power Supplies (Converters)

DC/DC Converters meet rail and industrial standards.

Providing 500 W of power in chassis mount package, PRC-500 Series includes versions that meet industrial EN60950 or rail EN50155 standards. Units feature standard nominal input voltages of 24, 48, 72, and 100 Vdc and provide conversion to adjustable 24 Vdc and 48 Vdc outputs that are regulated to 0.2% or better. ORing FET option allows parallel operation of multiple units. Measuring 10.47 x 7.08...

Read More »
Programmable Buck Regulator ICs deliver high-efficiency power.
DC to DC Power Supplies (Converters)

Programmable Buck Regulator ICs deliver high-efficiency power.

Dual-/single-output integrated DC-DC buck regulators SMB206A and SMB210A have serial digital interface and on-board non-volatile memory that enables configuration during development and re-programming in system by host software. ICs can also be programmed by fixed resistors and are available as standard products with fixed voltages. Respectively, SMB206A and SMB210A supply up dual 3 A + 3 A or...

Read More »
Rack-Mount DC-DC Power Supply suits rugged vehicle applications.
DC to DC Power Supplies (Converters)

Rack-Mount DC-DC Power Supply suits rugged vehicle applications.

Model TVR3001, 3,000 W DC-DC power conversion rack features 3 modules, each with two F501 full brick DC-DC converters, coupled with 2-phase boost converter, to provide standalone power solution. Modules plug into 19 in., 2U rack which can be used in 19 in. cabinet of various heights. Operating in temperatures from -25 to +60Â-ºC, product offers step-up or step-down power conversion and has...

Read More »
DC to DC Power Supplies (Converters)

Bulk Front End 1,200 W Power Supply is digitally programmable.

Accommodating power demands of networking equipment, PMBus-compliant DS1200DC-3 meets needs of systems co-located with telecom and central office applications operating from 48 V battery plants. Hot-pluggable, rack-mount module, programmable via IÂ-²C interface, has 1U x 2U form factor, -40 to -72 Vdc input, and main +12 Vdc output that continuously delivers up to 100 A. Auxiliary, always-on...

Read More »
DC to DC Power Supplies (Converters)

PCB-Mount DC/DC Converter delivers 48.7 W/in.-³ power density.

Supplied in 1.10 x 0.96 x 0.33 in. package, S36E Series provides 17 W of power and has 18-75 Vdc input range. Single outputs are available from 3.3-12 Vdc, and all models utilize 1 x 2 in. pin assignments for input, output, trim, and remote on/off connections. Available in open frame through-hole or SMT packages, RoHS-compliant series incorporates 2,250 Vdc isolation and operates from -40 to...

Read More »
Rugged DC/DC Power Supply delivers 1,000 W in harsh environments.
DC to DC Power Supplies (Converters)

Rugged DC/DC Power Supply delivers 1,000 W in harsh environments.

Incorporating dual Powerstax F501 DC/DC converters, TVS1001 offers step-up or step-down conversion. Electronic circuits are sealed to withstand exposure to harsh, dusty environments and are cooled via mechanically isolated, field-replaceable fan unit that offers choice of speeds depending on operating environment. Accommodating 11-36 Vdc input, power supply can be configured over range of...

Read More »
DC to DC Power Supplies (Converters)

DC-DC Controller ICs provide gate drive signal shaping.

Capable of providing up to 100 W, AS12xx Series is configurable for flyback, forward, boost, or buck power topologies used in isolated and non-isolated converters. Units feature 8.5-57 V input voltage, 100-500 kHz programmable PWM, and programmable soft start. FET gate drive signals are shaped to minimize switching noise and optimize EMI. Housed in 5 x 5 mm QFN package, RoHS-compliant ICs deliver...

Read More »

All Topics