DC to DC Power Supplies (Converters)

DC/DC Converters provide 75 watt triple output.
DC to DC Power Supplies (Converters)

DC/DC Converters provide 75 watt triple output.

HE Series converters are packaged in 1/2 brick case and provide 3 regulated DC outputs. Input ranges are 18 to 36 Vdc and 36 to 75 Vdc. Primary output voltages are 3.3 V at 20 A or 5 V at 15 A, and auxiliary outputs are +/-12 or +/-15 V at 2A. Units include isolation voltage of 1544 Vdc from input to output, switching frequency of 430 KHz, and thermal shutdown with auto restart for fail safe...

Read More »
DC/DC Converters provide efficiencies above 90%.
DC to DC Power Supplies (Converters)

DC/DC Converters provide efficiencies above 90%.

V7PC-04C Series non-isolated boost DC/DC converters provide 5 V power from 3.3 V source. They operate over 3.0 to 4.0 V input range, while providing maximum output current of 4 A. Available with or without remote on/off feature, step-up units allow operation to 70 deg C with no derating. Converters feature single-in-line package, fixed-frequency operation, and overvoltage and short circuit...

Read More »
DC/DC Converter takes up small amount of DIN-rail space.
DC to DC Power Supplies (Converters)

DC/DC Converter takes up small amount of DIN-rail space.

CP-DCDC 50 W family is available with 12 or 24 Vdc inputs, and has outputs including 5 Vdc @8 A, 12 Vdc @3 A, and 24 Vdc @2 A, with continuous short-circuit protection on output, and over and under voltage protection. Status indication is standard. Slim unit occupies only 2 1/4 in. of DIN-rail space. Module, with metal housing, mounts on TS 35 DIN rail. Optional chassis-mount hardware is...

Read More »
DC/DC Converters suit low voltage applications.
DC to DC Power Supplies (Converters)

DC/DC Converters suit low voltage applications.

PowerQor(TM) Tera Series half-brick isolated DC/DC converters include output voltages of 15, 12, 5, 3.3, 2.5, 2.0, 1.8, 1.5 and 1.2 V. All units draw power from 48 V nominal input and deliver 60 amps or 165 watts output. Typical efficiency for 1.2 V module is 88% at half-load (30 A) and 84% at full load (60 A). It provides full 60 A of output current at up to 70 deg C, and 200 LFM airflow with no...

Read More »
DC-DC Converter generates regulated output.
DC to DC Power Supplies (Converters)

DC-DC Converter generates regulated output.

Switched-capacitor ZXCP330E6 provides 3.3V output from 2 to 4.4 V input with maximum load current of 40 mA. Short-circuit and thermal-overload protected, SOT23-6 packaged converter suits lithium-ion and alkaline battery-powered products. Operating with flying capacitor of 220nF and 10 microF bypass capacitors at input and output, typical PCB area requirement is 8 x 5.3 mm. It draws 20 microA...

Read More »
DC-DC Converters do not require heat sink.
DC to DC Power Supplies (Converters)

DC-DC Converters do not require heat sink.

Dual output, NKA03 3.3V subminiature DC-DC converters allow any distribution of load across outputs as long as total does not exceed 1W. Galvanic isolation of 3kVDC between input and outputs ensures minimum switching noise. Typical line regulation is rated at 1%, while typical ripple and noise current ratings are 30mA (peak-to-peak). Converters are supplied in fully encapsulated, UL 94V-0...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Converters suit board-level applications.

CostCutter converters are available in SIP/DIP and modular packages, providing output power over range of 0.75 to 60 watts. Units accept single-range and 2:1 range inputs from 4.5 to 72 Vdc, which provide single and dual outputs from 3.3 to 15 Vdc. All models contain short circuit protection and internal input filter. CostCutter Series will operate over ambient temperature range of -25 to...

Read More »
DC/DC converter needs no heat sink.
DC to DC Power Supplies (Converters)

DC/DC converter needs no heat sink.

Quarter-brick sized DualQor(TM) is capable of delivering up to 40 W of total output power at 3.3V and 2.5V. It employs synchronous rectification to achieve efficiencies up to 87%. Converter has 48V nominal input and meets input voltage transient requirements up to 100V for l00 msec. Unit has industry-standard footprint of 1.45 x 2.3 in. with profile of 0.43 in., and industry recognized pin out...

Read More »
DC/DC Converters feature isolated output.
DC to DC Power Supplies (Converters)

DC/DC Converters feature isolated output.

5E Series offers input voltage ranges of 9-18, 18-36, and 36-72 Vdc. Units are available with single, dual, and triple low rippled regulated outputs. CMOS/TTL compatible remote On/Off control allows converter output to be turned on or off as necessary. 25/30 watt converters feature continuous short circuit protection and do not require heat sink. They have 6-sided shielding and can achieve...

Read More »

All Topics