DC to DC Power Supplies (Converters)

Point-of-Load Converter provides all-in-one power solution.
DC to DC Power Supplies (Converters)

Point-of-Load Converter provides all-in-one power solution.

Dual-output, non-isolated, point-of-load (POL) converter for DDR (double data rate) memory, DDR12, enables 2.5 V VDDQ supply for DDR logic and 1.25 V DDR termination voltage (VTT) to be derived from single module. Unit employs synchronous rectification techniques and has 85% conversion efficiency when operated at half-load or greater. The 2.5 V VDDQ output delivers up to 25 A, and 1.25 V VTT...

Read More »
DC-DC Converters feature miniature DIP package.
DC to DC Power Supplies (Converters)

DC-DC Converters feature miniature DIP package.

Fully encapsulated Series SB05 provides output power of 5 W. Converters accept single-range and 2:1 wide range inputs from 9-75 Vdc, and provide single and dual outputs from 3.3-24 Vdc. All contain short circuit protection, internal input filter, and 1600 V input-to-output isolation. They operate over temperature range of -25 to +71°C without forced cooling or output power derating.

Read More »
Isolated DC-DC Converters suit rack-mounted applications.
DC to DC Power Supplies (Converters)

Isolated DC-DC Converters suit rack-mounted applications.

Series NTH 2 W, dual output, surface mount converters are 5.5 mm high with mounting footprint of 0.49 inÂ-². Input voltages of either 5 or 12 V and dual isolated options of 5, 9, 12, or 15 V are available. Isolation between input and output is 1 kVdc. Converters operate with efficiencies up to 84% and have total power density of 25.67 W/in³. Operating temperature is -40 to...

Read More »
DC-DC Converter provides 88% efficiency.
DC to DC Power Supplies (Converters)

DC-DC Converter provides 88% efficiency.

Dual-output, quarter-brick Series ALQ15 offers output voltages of 3.3/2.5, 3.3/1.8, and 2.5/1.5 V. Rated to deliver up to 15 A from either output, series provides a full 60 W of clean, regulated, low-noise DC power. Unit can start up into high-capacitance loads of up to 10,000 microFarads per output. Features include over-temperature, over-current, and over-voltage protection. Input voltage range...

Read More »
Converters provide 95% efficiency.
DC to DC Power Supplies (Converters)

Converters provide 95% efficiency.

Non-isolated, point-of-load (POL), 10 A DC/DC Series SIL10, for use with 3.3 and 5.0 V on-board bus levels, employs synchronous-buck topology, using fixed-frequency switching and low on-resistance MOSFETs. Power density is 107 W/in3. Fixed-output converter provides 8 voltages from 0.8 to 3.3 V, and accommodates input voltage of 3.0 to 5.5 V. Wide-output trim model requires 4.5 to 5.5 V input....

Read More »
Converter offers low profile with standard pin out.
DC to DC Power Supplies (Converters)

Converter offers low profile with standard pin out.

PowerQor® Mega series eighth-brick sized isolated dc/dc converter delivers up to 15 A total output current at 3.3 V and below and 50 W at 5 V and above, without heatsink. The EML series has 48 V nominal input (35-75 V range) and meets input voltage transient requirements up to 100 V for 100 msec. Unit measures 0.9 x 2.3 x 0.37 in., occupies 60% of board space of standard quarter-brick, and...

Read More »
DC-DC Converter extends battery life in portable applications.
DC to DC Power Supplies (Converters)

DC-DC Converter extends battery life in portable applications.

Inductorless, 100 mA FAN5660 converter achieves over 90% efficiency at full load with typical operating current of 120 Â-µA. It inverts +l.5 V to +5.5 V input to corresponding -l.5 V to -5.5 V output. Unit can also split or double full load, +5.0V input voltage, of power supply or battery, providing +2.25 V in splitter mode and +9.5 V in doubler mode. Equipped with onboard oscillator...

Read More »
DC/DC Converters require no external components.
DC to DC Power Supplies (Converters)

DC/DC Converters require no external components.

PTK6700 Series non-isolated 13 A DC/DC VRMS provide up to 45 W of output power. Units can accept inputs of 3.3, 5, or 12 Vdc and provide single or dual outputs that are 5-bit digitally programmable from 1.1 to 3.5 Vdc. They utilize on-board heat exchanger technology, have operating efficiencies of 92% and operate over ambient temperature range of -40 to +70°C without forced-air cooling or...

Read More »
DC/DC Converters suit computer workstations and PCs.
DC to DC Power Supplies (Converters)

DC/DC Converters suit computer workstations and PCs.

Single-output, non-isolated, point-of-load (POL) converters employ open-frame single-board construction and fixed-frequency switching technology. All converters offer adjustable output and are suited for through-hole board mounting. SIL06 converters handle output currents up to 6A, with input voltages of 5 and 12 Vdc; SIL15 units handle output currents to 15A with input voltages of 5 and 12 Vdc,...

Read More »
DC/DC Converters come in single inline packaging.
DC to DC Power Supplies (Converters)

DC/DC Converters come in single inline packaging.

OPN-20 Series DC/DC converters provide output power up to 20 W for board-level products such as data acquisition, communications, and industrial I/O. Converters accept inputs from 3 to 5.5 Vdc and are available in 9 models that provide outputs from 1.5 to 3.3 Vdc. All models contain short circuit protection, internal input filter, remote on/off control, and operate over ambient temperature range...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers