DC to DC Power Supplies (Converters)

DC/DC Converter Series has no minimum load requirement.
DC to DC Power Supplies (Converters)

DC/DC Converter Series has no minimum load requirement.

Surface-mount SXQ50 DC/DC converter series features outputs up to 50 W from quarter-brick, open-frame package which measures 2.3 x 1.46 x 0.4 in. Series employs fixed-frequency switching technology, and is available in four models with 5.0, 3.3, 2.5, or 1.8 V outputs (which can be trimmed from 90% to 110% of nominal). Units are rated to 20 A (1.8 and 2.5 V models), 15 A (3.3 V unit), and 10 A...

Read More »
DC/DC Converters operate from nominal 3.3 V source.
DC to DC Power Supplies (Converters)

DC/DC Converters operate from nominal 3.3 V source.

V7PC-10C series non-isolated, step-down DC/DC converters provide up to 10 A output current from 3.3 V bus input. Output voltages range from 2.5 to 1.0 V; efficiencies range up to 92% full load. Singe-in-line (SIP) converters with thermal management require less than 1 square in. of PCB space. Operate to 70° C with no derating over 3.0 to 3.6 V input range. Optional remote sense pin is...

Read More »
DC-DC Converters provide single output with >85% efficiency.
DC to DC Power Supplies (Converters)

DC-DC Converters provide single output with >85% efficiency.

TCPDC Series 600 watt converters have input voltages of 22 to 32 and 42 to 56 Vdc, and outputs of 5, 12, 24, and 48 V up to 600 W. Units are over load, over voltage, and over temperature protected. They include remote turn-on/turn-off and DC-operated ball bearing fan. Operating temperature range is 0 to 55 deg C. Hot swap/rack mount options are available. Applications include telecommunications,...

Read More »
DC/DC Converters employ 300 kHz frequency, buck topology.
DC to DC Power Supplies (Converters)

DC/DC Converters employ 300 kHz frequency, buck topology.

LSN D3 Series SIPs are non-isolated DC/DC converters that accept 3.3 V inputs (3.0 to 3.6 V input range) and deliver 1, 1.2, 1.5, 1.8, 2, or 2.5 V outputs rated at 10 A. They employ single-in-line (SIP) packages that measure 2 x 0.55 x 0.34 in., and may be configured in vertical or horizontal orientations. Converters facilitate true point-of-use (point-of-load) power processing. Their on-board...

Read More »
DC/DC Converter delivers 60 watts of power.
DC to DC Power Supplies (Converters)

DC/DC Converter delivers 60 watts of power.

Dual-output, quarter-brick Model AEQ15AF48 has 5 V output that delivers up to 12 A, and 3.3 V output that provides up to 15 A. With operating efficiency near 90%, converter delivers 60 W of output power in any combination demanded by two loads. It has input range of 36 to 75 V, output voltage trim adjustment, positive or negative logic-enable, input-control pin, under-voltage lockout, and...

Read More »
DC/DC Converters power low voltage silicon from 5V source.
DC to DC Power Supplies (Converters)

DC/DC Converters power low voltage silicon from 5V source.

V7PC-10B Series non-isolated, step-down converters provide up to 10 A of output current from 5 V source. Output voltages range from 3.3 V down to 1.0 V. V7PC-10B25S 2.5 V unit delivers 92% efficiency at full load, while 3.3 V unit, V7PC-10B33S delivers 94%. Converters feature single-in-line package, overvoltage and short-circuit protection, and fixed-frequency operation. They operate to 70 deg C...

Read More »
DC/DC Converters have 1% output noise of output voltage.
DC to DC Power Supplies (Converters)

DC/DC Converters have 1% output noise of output voltage.

Dual output HW family DC/DC converters consists of 9 models ranging from 5 to 6 watts of output power in 24-pin DIP. Models are self-contained with input and output filtering. HW models offer 2:1 input range; 9 to 18, 18 to 36, or 36 to 75 Vdc. Outputs are +/- 5, 12, or 15 V with currents of +/- 500, 250, and 200 mA, respectively. Converters are isolated input to output with isolation voltage of...

Read More »
Dual Output DC-DC Converters operate from -40 to 85 deg C.
DC to DC Power Supplies (Converters)

Dual Output DC-DC Converters operate from -40 to 85 deg C.

NKA Series 1 W converters are supplied in sub-miniature, 14-pin DIP packages and are available for 3.3, 5, and 12 V input voltages. Output voltage options of 12 and 15 V are offered for 3.3 V input model, while 5V and 12 V input parts can be supplied with voltage options of 5, 9, 12, and 15 V. Galvanic isolation of 3 kVdc reduces switching noise. Internal SMD construction uses multilayer ceramic...

Read More »

All Topics