DC to DC Power Supplies (Converters)

DC/DC Converters come in single inline packaging.
DC to DC Power Supplies (Converters)

DC/DC Converters come in single inline packaging.

OPN-20 Series DC/DC converters provide output power up to 20 W for board-level products such as data acquisition, communications, and industrial I/O. Converters accept inputs from 3 to 5.5 Vdc and are available in 9 models that provide outputs from 1.5 to 3.3 Vdc. All models contain short circuit protection, internal input filter, remote on/off control, and operate over ambient temperature range...

Read More »
DC/DC Converter achieves 89% efficiency.
DC to DC Power Supplies (Converters)

DC/DC Converter achieves 89% efficiency.

The VSX50MD23 50 W dual output converter has 36-75 V input range and offers 3.3 and 5.0 V outputs with maximum output noise voltges of 60 and 80 mV, respectively. Isolation between input and outputs is 1500 Vdc. Output voltage tracking takes place at turn-on and turn-off under all line and load conditions. Unit includes remote on/off, output voltage trim, output current limit, input filtering and...

Read More »
DC/DC Converters operate with high efficiency.
DC to DC Power Supplies (Converters)

DC/DC Converters operate with high efficiency.

QH Series converters, housed in industry-standard 1.45 x 2.28 x 0.52 in. 1/4 brick package, provide up to 20 A of current, and have output voltages of 3.3, 5, 12, 15, or 24 Vdc. Efficiency is up to 87%. Output is isolated from inputs, allowing output to be used with positive or negative polarity and various grounding options. Input voltage options are 24 and 48 Vdc. All models provide...

Read More »
Bus Converter delivers 240 W in quarter-brick.
DC to DC Power Supplies (Converters)

Bus Converter delivers 240 W in quarter-brick.

BusQor(TM) employs synchronous rectification and achieves 96.5% efficiency at full rated load. It accepts nominal 48 V input and delivers unregulated, stepped down voltage of 12 V with 2000 Vdc input-output isolation. Unit can deliver up to 20 A at 12 Vout for total of 240 W. Module includes input under-voltage lockout, output over-voltage shutdown, short-circuit protection, thermal shutdown and...

Read More »
DC-DC Converters suit low-profile and rack-mount applications.
DC to DC Power Supplies (Converters)

DC-DC Converters suit low-profile and rack-mount applications.

NDY2403 and NDY4803 converters provide single, regulated 3.3 V output and have input-to-output isolation rating of 1 kVdc. NDY2403 can handle input voltage from 18 to 36 V, while NDY4803 is suitable for input voltages from 36 to 72 V. Each will deliver full 3 W output at temperatures from -40 to +85°C without heatsink. Typical load and line regulation for each device is rated at 0.6% and...

Read More »
DC to DC Converters feature modular design.
DC to DC Power Supplies (Converters)

DC to DC Converters feature modular design.

Model MD5 and MD7 Series of 500 to 750 W converters have 36 to 75 Vdc input and are offered in 23 different modules ranging from 2 to 48 V. Each module is isolated and can be connected in several ways to achieve required output. Up to 6 individual power-supply modules fit in single enclosure. Units measure 5 x 8 x 2.5 in. for 500 W models, and 7.5 x 9 x 2.5 in. for 750 W models. Operating...

Read More »
DC-DC Converter provides up to 70A in half brick package.
DC to DC Power Supplies (Converters)

DC-DC Converter provides up to 70A in half brick package.

PAH200H series DC-DC converter offers power density of over 105 W/inÂ-³, and provides three output voltage choices from 1.8 to 3.3 V. Efficiencies are rated up to 90% for 3.3V output unit. Unit operates from nominal 48 V input, provides regulated output at power levels up to 198 W, and accepts DC inputs from 36 to 75 Vdc with peak of 100 V for 100 ms. Features include remote sense,...

Read More »
DC/DC Converters deliver 60 Amps output current.
DC to DC Power Supplies (Converters)

DC/DC Converters deliver 60 Amps output current.

Open frame ALH60 and heat sink adaptable AEH60 are 60 Amp, half-brick converters with efficiencies up to 91% on 3.3 V model and 89% on 1.8 V model. Units include over temperature, over current and over voltage protection, plus under voltage lockout with hysteresis to prevent false starting and stopping at low input voltages. With 36 to 75 V input range and output voltages of 1.2, 1.8, 2.5, and...

Read More »
DC to DC Converter measures 1.45 x 2.3 x 0.43 in.
DC to DC Power Supplies (Converters)

DC to DC Converter measures 1.45 x 2.3 x 0.43 in.

DualQor(TM) series dual output voltage, quarter-brick sized isolated dc/dc converter delivers up to 60 W total output power at ±12 V without attached heatsink. Converter module employs synchronous rectification to achieve efficiencies to 92%. It has 48 V nominal input (35 to 75 V range) and meets input voltage transient requirements up to 100 V for 100 ms. Mean time between failures (MTBF)...

Read More »
DC/DC Converters provide up to 40 W of power.
DC to DC Power Supplies (Converters)

DC/DC Converters provide up to 40 W of power.

A-Series 2 x 2 in. DC/DC converters handle temperatures from -40 to 55°C. UWR 26 to 40 W, single-output, switching DC/DC converters utilize fixed-frequency, fully synchronous, high-frequency (300 to 360 kHz) forward topology and automatically assembled, SMT-on-pcb (including magnetics) construction. Topology delivers efficiencies of 90% (5V models), low noise of 75 mVp-p, ±0.5% max....

Read More »

All Topics