DC to DC Power Supplies (Converters)

Multi-Phase DC/DC Controllers support 40-120 A.
DC to DC Power Supplies (Converters)

Multi-Phase DC/DC Controllers support 40-120 A.

Series TPS4009x synchronous, DC/DC buck controllers manage 2, 3, or 4 phases and can operate each phase at switching frequency up to 1 MHz, resulting in ripple frequency up to 4 MHz at input and output in 4-phase applications. Single-chip, PWM devices include current sense fault protection, programmable over current protection, and individual phase current detection. They offer more than 90%...

Read More »
Step-Up DC/DC Converter has Schottky diode and soft start.
DC to DC Power Supplies (Converters)

Step-Up DC/DC Converter has Schottky diode and soft start.

Housed in 6-lead ThinSOT(TM) package, LT3461/A combines 40 V, 300 mA (ISW), low VCESAT (260 mV) switch that delivers efficiencies to 84% with onboard Schottky diode and soft-start capability. Using constant frequency and current mode architecture, it operates from 2.5-16 V input voltage. Constant switching frequency of 1.3 or 3 MHz enables low noise operation and use of ceramic capacitors and...

Read More »
DC/DC Boost Converters have linear regulation functionality.
DC to DC Power Supplies (Converters)

DC/DC Boost Converters have linear regulation functionality.

Utilizing synchronous rectifier based on PWM controller, TPS6102x family of synchronous, 1.5 A switch DC/DC boost converters provide up to 96% power conversion efficiency from input voltage range of 0.9-5.5 V. ICs can operate in down-mode with linear regulation if input voltage reaches or exceeds output voltage. Available in 10-pin, 3 x 3 mm QFN package, products have power save mode, 25...

Read More »
Step-Down Converters provide up to 95% power efficiency.
DC to DC Power Supplies (Converters)

Step-Down Converters provide up to 95% power efficiency.

Series TPS6222x consists of 400 mA, synchronous DC/DC converters that support input voltage from 2.5-6 V, output voltage of 6 V down to 0.7 V, and output current up to 400 mA. They operate with fixed switching frequency of 1.25 MHz. In Power Save Mode, switching frequency is reduced and quiescent current is typically 15 Â-µA. Converters come in 5-pin ThinSOT-23 package and are suited for...

Read More »
DC/DC Converters feature efficiencies to 91%.
DC to DC Power Supplies (Converters)

DC/DC Converters feature efficiencies to 91%.

Utilizing multilayer/PCB planar magnetics, Series HB provides up to 200 W of output power at currents to 80 A. Available in single, dual, and triple outputs from 1.5-13 Vdc, units offer input ranges of 18-36 and 36-75 Vdc. They include input under-voltage lockout, output OVP, and over-temperature protection. Line/load regulation is ±0.1% and ripple/noise performance is as low as 50 mV. All...

Read More »
DC-DC Converters feature power factor correction.
DC to DC Power Supplies (Converters)

DC-DC Converters feature power factor correction.

Series AIF-PFC surface-mount converter modules are parallel-configurable and can deliver up to 1,600 W of power from input range of 85-264 Vac. They offer power densities up to 290 W/inÂ-³. Embedded functions provide monitoring, protection, and adjustment capabilities as communication bus that can store end user information. Units operate from 40-100°C and reach 95% efficiency at 230...

Read More »
Bus Converters deliver up to 25 A at 12 V.
DC to DC Power Supplies (Converters)

Bus Converters deliver up to 25 A at 12 V.

Packaged in open-frame quarter-brick, ALQ25B50 series bus converters deliver up to 300 W of output power at up to 96% efficiency, and accept input range of 42-53 V. Products utilize open loop DC conversion scheme, enabling them to exhibit resistive output characteristics to ease system stability management with multiple point of loads employed in distributed power architecture. Devices offer...

Read More »
DC/DC Step-Down Controllers are 95% efficient.
DC to DC Power Supplies (Converters)

DC/DC Step-Down Controllers are 95% efficient.

Non-synchronous TPS6420x series controllers conserve battery life in battery-powered applications with input voltages from 1.8-6.5 V that must be stepped down to regulated voltage to 1.2 V and provide output currents from 1-3 A. Housed in 6-pin SOT-23 packages, devices feature quiescent current of 20 Â-µA and drive external P-channel MOSFET. Products use minimum on-time and off-time control...

Read More »
Synchronous Boost Converter has 5 A switch current.
DC to DC Power Supplies (Converters)

Synchronous Boost Converter has 5 A switch current.

Low-profile LTC3425 incorporates 4-phase switching topology, operates at frequencies up to 8 MHz, and delivers output voltages of up to 5.25 V from input voltage range of 0.5-4.5 V. It provides up to 3 A continuous output current from 32-lead, 5 x 5 mm QFN package with less than 2 mm profile. Internal switches deliver efficiencies as high as 95%. Automatic or manual Burst Mode® operation...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers