DC to DC Power Supplies (Converters)

DC/DC Converters feature isolated outputs.
DC to DC Power Supplies (Converters)

DC/DC Converters feature isolated outputs.

Series 6E offers 16 high-efficiency 25/30 W Converters with pi input filters and 4:1 input voltage range. Input voltages include 9-36 and 18-72 Vdc. Units are available with single, dual, and triple outputs, which are totally isolated from input. For power conservation, CMOS/TTL compatible Remote On/Off Control allows converters to be powered down. Efficiencies up to 84% are achieved due to 200...

Read More »
DC/DC Converter provides step-up and step-down regulation.
DC to DC Power Supplies (Converters)

DC/DC Converter provides step-up and step-down regulation.

Model LT3433 current-mode DC/DC converter operates from input voltage of 4-60 V, delivering regulated outputs between 3.3-20 V and 200 kHz constant frequency operation. Burst Mode® reduces no-load quiescent current to 100 -µA. Converter incorporates dual internal 500 mA switches, which seamlessly switch between step-down and step-up voltage conversion. Programmable soft-start helps prevent...

Read More »
Buck-Boost DC/DC Converter delivers up to 1 A.
DC to DC Power Supplies (Converters)

Buck-Boost DC/DC Converter delivers up to 1 A.

Model LTC3441 synchronous, fixed frequency converter offers efficiencies up to 95%, optimizing battery run time for battery-powered applications. It operates from input voltage of 2.4-5.5 V and can provide up to 1 A at fixed output voltage between 2.4-5.25 V. Buck-Boost topology allows unit to operate above, below, and equal to output voltage with single inductor. Operating frequency is set...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Converter delivers up to 600 mA from 2 channels.

Model LTC3407 1.5 MHz synchronous-buck regulator operates from input voltage of 2.5-5.5 V, using constant-frequency, current-mode architecture. It generates 2 independent output voltages as low as 0.6 V, enabling it to power low-voltage DSPs and microcontrollers. Switching frequency of 1.5 MHz allows utilization of tiny ceramic capacitors and inductors less than 1.2 mm in height. Unit delivers...

Read More »
Synchronous Buck Converter meets CPU requirements.
DC to DC Power Supplies (Converters)

Synchronous Buck Converter meets CPU requirements.

Model FAN53168 multi-phase, DC-to-DC PWM controller and Model FAN53418 synchronous, MOSFET driver work together to form multi-phase synchronous buck converter. To meet tight VRM/VRD10 loadline, FAN53168 uses temperature-compensated inductor current sensing. Unit combines high-speed control loop with active voltage positioning to meet CPU load transient requirements. FAN53168/FAN53418 chipset...

Read More »
Integrated Converter handles output voltages of 0.8-1.2 V.
DC to DC Power Supplies (Converters)

Integrated Converter handles output voltages of 0.8-1.2 V.

FunctionPAK® FX5545G008 consists of one single-package, DC/DC, synchronous buck converter rated for max output power of 3.6 W and max current of 3 A. It delivers power density of more than 380 W/in.-³ and comes in 20-port, surface-mount, BGA package that measures 14.7 x 12.2 x 3 mm. Unit converts 2.5-6 V inputs to 0.8-1.2 V output voltage and can shift DC voltage levels while stabilizing...

Read More »
DC/DC Controllers provide output voltages down to 0.8 V.
DC to DC Power Supplies (Converters)

DC/DC Controllers provide output voltages down to 0.8 V.

Models MIC2198/9, offering current capability of 20 A, can power CPUs, DSPs, and FPGAs with up to 95% efficiency. Input voltage range is 4.5-32 V, making them suitable for 5, 12, and 24 V power bus systems. Model MIC2198 operates at 500 kHz, while Model MIC2199 operates at 300 kHz. Both units are housed in 4 x 4 mm MLFTM 12-lead package, and provide PWM current mode control, cycle-by-cycle...

Read More »
DC/DC Converters provide isolated output.
DC to DC Power Supplies (Converters)

DC/DC Converters provide isolated output.

Series 5E 25/30 W DC/DC converters feature pi-input filter and 2:1 input voltage ranges of 9-18, 18-36, and 36-72 Vdc. Regulated, low ripple, single, dual, and triple outputs are available. CMOS/TTL-compatible, remote on/off control allows output to be put into powered down, stand-by mode. Single-output converters have external Output Trim that allows output voltage to be set within ±10%...

Read More »
DC-DC Converters offer current sharing/parallel operation.
DC to DC Power Supplies (Converters)

DC-DC Converters offer current sharing/parallel operation.

Series T1UDC single output, 600 W converters feature output voltages of 3.3, 5, 12, 24, and 48 V. Inputs range from 22-32 Vdc or 42-56 Vdc. Units include remote turn-on/turn-off, ±5% voltage adjust range, and DC-operated ball bearing fan. Operating temperature range is -10 to +65°C. Over-voltage, over-load, and over-temperature protection is provided. Ruggedized units are available for...

Read More »

All Topics