DC to DC Power Supplies (Converters)

DC to DC Power Supplies (Converters)

Power-One Sixteenth Brick Wins EDN Magazine's Hot Product of 2007 Award

Camarillo, CA - January 10th, 2008 - Power-One, Inc. (Nasdaq: PWER) announces that it has received a Hot Product of 2007 Award from Electronic Design News Magazine for the SSQE48T20033 isolated DC-DC converter. This high-performance sixteenth-brick is designed to power communications, data server/storage, and workstation applications. The SSQE48T20033 delivers an industry-leading feature set from...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Converters offer up to 90% efficiency.

Based on synchronous rectification techniques, EBL Series provides 30 W of output power and 10 mV output noise. Units come in 15 models with 2:1 input voltage range; nominal inputs of 12, 24, and 48 Vdc; and single output voltage of 2.5, 3.3, 5, 12, or 15 Vdc. Housed in 6-sided, shielded metal case measuring 2 x 1 x 0.45 in., converters include input-to-output isolation, soft start, external...

Read More »
Step-Down DC/DC Converter is offered in 3 x 3 mm DFN package.
DC to DC Power Supplies (Converters)

Step-Down DC/DC Converter is offered in 3 x 3 mm DFN package.

Model LT1913 3.5 A, 25 V step-down switching regulator operates within VIN range of 3.6 to 25 V. It features 4.6 A, 95 mW internal switch that can deliver up to 3.5 A of continuous output current at voltages as low as 0.79 V at up to 90% efficiency. Switching frequency is user programmable from 20 kHz to 2.4 MHz and converter features external synchronization from 250 kHz to 2 MHz. Unit operates...

Read More »
DC to DC Power Supplies (Converters)

LED Driver drives up to 10 white LEDs connected in series.

Model AAT1239-1 WLED driver IC operates off 2.7-5.5 V input range and delivers maximum continuous output of 40 V at 30 mA. Single-wire S2CWire interface controls WLEDs across 26 discrete current steps, reducing flicker, and true load disconnect function isolates load from power source while in OFF/disabled state. Other features include less than 1.0 Â-µA shutdown current to extend battery...

Read More »
DC/DC Converters power DDR1, DDR2, and DDR3 memory.
DC to DC Power Supplies (Converters)

DC/DC Converters power DDR1, DDR2, and DDR3 memory.

Model VCN60BADJTU-1C 60 A-rated converter has overall dimensions of 61 x 9.5 x 31.8 mm while VCN70BADJTU-1C 70 A unit measures 61 x 16.8 x 31.8 mm. Both point-of-load converters have current density of approximately 50 A/in3 and efficiency of 88% at full load as well as programmable output voltage range of 0.6-3.5 Vdc. They include soft start circuit, differential remote sense, power good signal,...

Read More »
DC to DC Power Supplies (Converters)

Step-Down Converter suits 12 V industrial applications.

Supplied in Pb-free, 16-pin, 3 x 4 mm TDFN package, AAT1160 DC/DC converter helps backplane-based equipment designers meet environmental/energy standards. Current-mode solution delivers up to 3 A output from 12 V input and offers 150 Â-µA no-load quiescent current. Supporting efficiency levels to 96%, converter has 800 kHz switching frequency and enables user to operate device in forced PWM...

Read More »
DC to DC Power Supplies (Converters)

POL DC/DC Converters power DDR memory applications.

Featuring small form factor with 1U height, 60 A Model VCN60BADJTU-1C and 70 A Model VCN70BADJTU-1C offer current density of 50 A/inÂ-³ and 88% efficiency at full load. With input voltage of 12 Vdc, units deliver programmable output from 0.6-3.5 Vdc with setpoint accuracy of 0.5%. Both include soft start circuit, differential remote sense, power good signal, pre-bias turn on, and output...

Read More »
Axiomatic Releases A 10 A (240 Watt) Version of the Rugged 24 Vdc-24 Vdc Converter
DC to DC Power Supplies (Converters)

Axiomatic Releases A 10 A (240 Watt) Version of the Rugged 24 Vdc-24 Vdc Converter

January 18, 2008 - Mississauga, Ontario, Canada Axiomatic releases a 10A (240 Watt) version of the rugged 24Vdc-24Vdc converter and the 48Vdc-24Vdc converter, part numbers AX080200 and AX080000. Axiomatic high-efficiency power converters are used in mobile, military and oilfield service equipment. All our DC/DC converters are designed for harsh operating environments. DC-DC converters provide...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics