DC to DC Power Supplies (Converters)

DC to DC Power Supplies (Converters)

DC/DC Converters offer 4:1 input range.

Suited for industrial, medical, and telecom applications, UQQ converters supply up to 100 W of usable power and come in standard quarter-brick package and pin-out. They feature 9-36 V (12/24 Vin nom) or 18-75 V (24/48 Vin nom) dc inputs, efficiencies up to 91%, optional base plate with total package below 0.5 in., and UL/EN/IEC safety approvals. Available models are 3.3 V/25 A, 5 V/20 A, 12 V/8...

Read More »
Bus Converters operate down to -55°C.
DC to DC Power Supplies (Converters)

Bus Converters operate down to -55°C.

Available in M temperature grade, 48 Vdc VoI Chip(TM) BCM Bus Converters are suited for military and aerospace applications. Each Sine Amplitude Converter operates from 38-55 Vdc primary bus to deliver isolated secondary voltage. Power density is up to 1,000 W/in.Â-³ in standard package, which is compatible with pick-and-place and assembly processes. Available in SMT and through-hole...

Read More »
Step-Down DC/DC Converter draws quiescent current of 75 µA.
DC to DC Power Supplies (Converters)

Step-Down DC/DC Converter draws quiescent current of 75 µA.

Operating within 3.6-36 V range, Model LT3680 is suited for load dump and cold-crank conditions found in automotive applications. Unit features internal switch that can deliver up to 3.5 A of continuous output current to voltages as low as 0.79 V. Switching frequency is user programmable from 250 kHz to 2.4 MHz. Housed in 3 x 3 mm DFN-10 package, converter operates from -40 to 125°C and...

Read More »
DC/DC Converters have input range of 9-36 / 18-75 Vdc.
DC to DC Power Supplies (Converters)

DC/DC Converters have input range of 9-36 / 18-75 Vdc.

Supplied in shielded 2.00 x 2.00 x 0.40 in. package with optional clip-on heatsink, RoHS-compliant TEN-40WI series has 4:1 input range and offers 40 W of output power. Ten models comprise series, offering single outputs of 3.3, 5, 12, and 15 Vdc and dual output voltages of ±12 or ±15 Vdc. Efficiency ratings up to 88% enable full-load operation over -40 to +85°C, and over...

Read More »
DC to DC Power Supplies (Converters)

Isolated DC/DC Converter is suited for harsh environments.

Designed for systems that need to be powered from 12 Vdc and 24/28 Vdc supplies, MQP120 series accommodates 9-40 Vdc input and is rated to 120 W. Standard output options provide voltages of 3.3, 5, 12, 15, and 24 Vdc. Measuring 3.74 x 0.45 x 2.56 in., fully encapsulated series exhibits power density of 26.7 W/in.Â-³ and is resistant to effects of dust, vibration, and shock. Products can meet...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Converters each provide three 10 A outputs.

With input range of 18-36 Vdc, LT Series provides 3 fully independent and regulated output voltages from 5-1.5 V. Units are isolated input to output and output to output. Housed in half-brick package measuring 2.4 x 2.3 x 0.55 in., each unit is fully encapsulated with thermally conductive potting compound and aluminum baseplate with operating temperature of -40 to +100°C. Trim capability on...

Read More »
DC to DC Power Supplies (Converters)

Boost Converter supplies up to 800 mA.

Model AS1326 synchronous, high efficiency, step-up DC/DC converter delivers 620 mA at 5.0 V from 2 AA cells or 470 mA at 3.3 V from single AA cell and can provide adjustable output voltages from 2.5-5 V or fixed at 3.3 V. Operating from voltage between 0.7-5 V, device offers adjustable soft-start and current limit. It also has 1 MHz fixed switching frequency and can synchronize switching...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Converters suit telecom and datacom applications.

Capable of delivering 40 W of output power at higher voltages, or up to 18 A of output current at 1.2 V, 1/16 brick DC-DC converters operate over 4:1 input range of 18-75 Vdc. They feature fixed frequency synchronous rectification control together with positive/negative remote sense, remote on/off logic, and ±10% output trim. Protection features include input and output over-voltage,...

Read More »
DC to DC Power Supplies (Converters)

Mouser Electronics and Fujitsu Components America Expand Global Distribution Agreement to Include FDK DC-DC Converters

Mouser Now Sole North American Distributor of FDK DC-DC Converters Mansfield, Texas, USA - June 21, 2007 - Mouser Electronics, Inc., known for its rapid introduction of the newest products, today announced it has expanded its global distribution agreement with Fujitsu Components America to include the FDK line of DC-DC converters. This agreement makes Mouser the sole North American distributor...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers