DC to DC Power Supplies (Converters)

DC/DC Converter can deliver 400 and 800 mA independently.
DC to DC Power Supplies (Converters)

DC/DC Converter can deliver 400 and 800 mA independently.

Dual-output, synchronous buck regulator LTC3619 has programmable average input current limit of 200 mA to 1.2 A. With efficiencies to 96%, IC delivers up to 800 mA continuous output current from one channel and 400 mA from other. Using constant frequency and current mode architecture, product operates from 2.5-5.5 V input and can generate 2 independent output voltages as low as 0.6 V. Switching...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Converter features transformerless architecture.

Utilizing transformerless voltage conversion topology, 7.5 kW Charge and Add (C/A) DC/DC converter is designed for electric car applications - specifically for converting 48 Vdc into 240 Vdc to drive brushless DC motor. This step-up (x5 input voltage), adjustable (0 V to Max) converter weighs less than 10 lb and may be stacked in any number and connected in series to achieve higher output voltage.

Read More »
DC-DC Converters deliver 15 W from 1 x 1 in. footprint.
DC to DC Power Supplies (Converters)

DC-DC Converters deliver 15 W from 1 x 1 in. footprint.

Featuring fully isolated design, PXA Series has open frame design and PXB Series has shielded metal case. Single-output voltages for both series include 3.3, 5, 12, and 15 Vdc. In addition, PXB Series offers dual-output models that provide ±5, ±12, and ± 15 Vdc. Operating from -40 to +85°C, converters provide efficiency up to 88%, remote on/off and output adjustment, as...

Read More »
Synchronous DC/DC Controller offers digital power management.
DC to DC Power Supplies (Converters)

Synchronous DC/DC Controller offers digital power management.

Model SMB211 10 A controller features serial digital interface for configuration during development and reprogramming in system by host software. Integrated synchronous DC-DC step-down converter provides set of digital control functions. Operable at 4 different frequencies, IC has output voltage digitally set from +0.5-2.5 V in 10 mV steps or from +1.0-5.0 V in 20 mV steps, monitored for over and...

Read More »
Warning on Counterfeit Products
DC to DC Power Supplies (Converters)

Warning on Counterfeit Products

Aimtec has confirmed that counterfeit versions of its DC/DC converters are being manufactured and sold, by unauthorized distributors, to unsuspecting customers in various regions around the world. While the company continues to thoroughly investigate their sources," states Vladimir Serafimov, President of Aimtec Inc., "we must warn customers of the quality and reliability risks associated with...

Read More »
DC/DC Converter complies with range of military standards.
DC to DC Power Supplies (Converters)

DC/DC Converter complies with range of military standards.

MilQor Hi-Rel MQFL-28V accepts continuous input voltages of 16-40 V, handles transient input voltages of 5.5-50 V for 1 sec, and operates at efficiencies up to 91%. Providing up to 100 W power, it is available with single output voltages of 3.3, 5, 12, and 28 V, operating in temperatures from -55 to +125°C. Boost-converter stage enables delivery of full power through transients when input...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Converter features 4.2-40 V input voltage range.

Model LT3970 step-down switching regulator includes Burst Mode® operation that keeps quiescent current under 2.5 Â-µA in no load standby conditions and keeps output ripple below 5 mVp-p. Unit features 550 mA switch delivering up to 350 mA of continuous output current to voltages as low as 1.21 V. Boost and catch Schottky diodes, oscillator, control, and logic circuitry are also...

Read More »
DC/DC Converter drives high-current LEDs.
DC to DC Power Supplies (Converters)

DC/DC Converter drives high-current LEDs.

Featuring 3-40 V input voltage range, LT3519, 45 V current sense DC/DC converter drives up to ten 100 mA white LEDs from 12 V input. It senses output current at high side of LED, enabling buck, buck-boost, or boost configurations. True Color PWM(TM) dimming delivers constant LED color with ranges of more than 3,000:1. Providing open LED protection, soft-start, and thermal protection, it is...

Read More »
DC/DC Converters suit broad range of applications.
DC to DC Power Supplies (Converters)

DC/DC Converters suit broad range of applications.

Featuring 4:1 input range (9-36 Vdc or 18-72 Vdc), URB_LD-15W series of DC/DC converters suit industrial and communications applications. Single output models are fully regulated, with typical load regulation of ±0.5% and line regulation of ±0.2%. Units operate from -40°C to +85°C and come packaged in 1 x 2 in. metal shielded package with industry standard pin-out....

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics