Inverters offer interchangeable operator panels.
MICROMASTER universal drives are available in 4 performance classes: MM410, fractional to 1 hp, 1-phase 120 and 220 V contactor drives; MM420, fractional to 15 hp, 1- and 3-phase, 230 and 460 V basic inverter drives; MM430 variable torque rated inverters; and MM440 units with sensorless vector capability and optional closed loop vector control. All units offer accessible terminals,...
Read More »
Lamp Drivers provide lighting for PDAs and signage.
Model D305 is capable of driving electroluminescent (EL) lamps as large as 100 cmÃ-² with high voltage AC output from 2.5 to 7.0 Vdc supply voltage. It is available in MSOP-10 package in tape and reel. Model D306A can convert 2.0 to 16.0 Vdc supply input to up to 400 V peak-to-peak AC signal that can drive EL lamps as large as 180 cmÃ-². It is available in surface-mount SOIC-16 with heat...
Read More »AC inverter suits variable torque applications.
Model 3G3PV includes built-in, on-board communication protocols of MetasysÃ-® and Apogee(TM). Inverter also offers RS-422 and RS-485 communication. Its provides 4-line engineering display, removable terminal strip, and split faceplate. Keypad can be used with access to terminal strip. High-slip braking feature slows inverter down. Model 3G3PV is available from .75 to 125 hp in 230 Vac and...
Read More »
DC to AC Inverter suits LCDs backlit by 4 CCF tubes.
DMD Series DC-AC inverter provides wide-range dimming via analog signal for LCDs. It is suitable for use as power solution for LCD modules from 15 to 18 in. (diagonal) used in medical imaging applications, point-of-sales (POS) displays, kiosks, and desktop computer monitors. Inverter provides up to 23 W of output power, integrated input and output connectors, and onboard pulse width modulation...
Read More »
DC-AC Inverter powers automotive LCDs.
Fully encapsulated for resistance to shock, vibration, and humidity, P44W powers LCDs used in GPS systems and audio and video displays in car interiors. It meets starting voltage and current requirements for automotive OEMs, provides up to 15 W of output power, runs at up to 9 mils boost current for quick warm-up in cold starts, and performs over operating temperature range of -86 to +185Ã-
Read More »
Inverter powers automotive LCDs.
Fully encapsulated P44W DC-AC inverter offers starting voltage of up to 3,000 Vrms. It provides up to 15 watts of output power, runs at up to 9 mils boost current for quick warm-up in cold starts, and performs over operating temperature range of -30 to 85Ã-
Read More »
Portable DC Inverter offers constant-current output.
Single-phase, 230/460 Vac, 50/60 Hz P-Wee(R) 250 GTS power source is designed for STICK, high frequency TIG, and Lift Start TIG welding applications. It includes adjustable hot start and automatically adjusts arc control for smooth operation with all electrodes. Standard controls include gas valve, built-in sloper, spot timer, pulser, and high-frequency starting. Fixed preflow is provided and...
Read More »
DC-AC Inverters power multi-tube LCD modules.
MD Series drives up to 16 CCF tubes with combined power of 10-60 W. High-efficiency inverters can be dimmed using external analog control signal that interfaces with onboard pulse width modulator. Inverters can dim to less than 0.5% duty cycle, for dimming ratio of 200:1. Depending on backlight, dimming ratio of 1000:1 can be achieved. Five mounting holes on each module make installation simple....
Read More »
AC Inverter suits harsh environments.
MV-4X has NEMA 4X/12 and IP66 ratings, allowing it to resist dust and forced water or chemicals. On board RS-485 Modbus RTU allows for networking up to 32 nodes. Users can select between open loop vector control or volts/hertz control with simple parameter change. Programmable analog and digital inputs and outputs are available. Inverter is offered in 230 Vac, 3-phase from 1/2 to 10 hp, and in...
Read More »
Portable Inverter suits TIG welding applications.
Pro-Wave(TM) 300GTSW AC/DC inverter offers full range capability from 300 to 5 amps. It includes Smart Logic(R) input voltage protection, Easy Link flip-of-a-switch voltage selection, and electronic input circuit protector. Inverter produces 200 A output from 50 A of single phase, 230 Vac input. Spot timer ranges from 0.5 to 5.5 sec, and pulse control ranges from 0.5 to 500 pps. Hot start stick,...
Read More »
TPA Motion Introduces Industry's First Compact Robotic Positioner for Medical Devices
TPA Motion's microplate handling robots are designed specifically for medical instruments and lab automation devices. Check out the video to learn more.
Read More »
