DC Motors

Outer Rotating DC Motor suits high inertia applications.
DC Motors

Outer Rotating DC Motor suits high inertia applications.

Heavy-duty brushless DC motor has 8.25 in. dia and provides 3.3 hp. Rated at 240 Vdc, motor is available with custom mounting configurations and life-lubricated, double-shielded ball bearings. Capable of developing 960 oz-in. running torque at 3500 rpm, motor is available with high-energy bonded neodymium, bonded samarium cobalt, or ceramic magnets. Magnetic circuit produces low cogging torque...

Read More »
DC Motors

Brush Motor eliminates wire-wound coil.

ThinGap(TM) TG3300-70B slotless brush PM motor incorporates armature coil assembly that eliminates bulky iron core. It delivers max continuous torque of 80 oz-in. at 10,000 rpm, using input voltage of 24 Vdc and current of 27.5 A. Motor is rated at over 1 hp, yet weighs less than 34 oz,and is thermally rated for operation up to 160°C ambient temperature. It measures 2.00 in. OD by 3.75 in....

Read More »
DC Motors

Brushless Motors suit motion control applications.

Series 06 synchronous, permanent magnet motors offer torque range of 63.7 to 3186 oz-in. with peak torque from 283 to 14161 oz-in. Nominal speed range is 500 to 3,000 rpm. All motors are 6-pole with magnets made from neodymium/iron/boron alloys. Stator windings are 3-phase star connections. Flange-mount motors are totally enclosed (IP44) and feature heat-treated, square aluminum alloy housings,...

Read More »
DC Motors/Gearmotors provide smooth, quiet operation.
DC Motors

DC Motors/Gearmotors provide smooth, quiet operation.

LO-COG® Series 9000 brush-commutated DC motors and gearmotors feature 7-slot skewed armatures to minimize magnetic cogging. Commutators are diamond turned after armature assembly for optimum concentricity. Motors are offered in 6 lengths, and achieve peak torques up to 77 oz-in. and speeds up to 8,250 rpm. Gearmotors are offered in 6 lengths with 12 ratios from 5.9:1 to 4732.5:1 and can...

Read More »
DC Motors/Gearmotors feature skewed armatures.
DC Motors

DC Motors/Gearmotors feature skewed armatures.

LO-COG® Series 8000 brush-commutated DC motors and gearmotors feature 7-slot skewed armatures designed to minimize magnetic cogging. Motors are available in 3 lengths and can achieve peak torques up to 16.8 oz-in. and speeds to 10,650 rpm. Gearmotors are offered in 3 lengths with 11 ratios from 6.3:1 to 1803.6:1 and can achieve peak torques to 100 oz-in. (standard) or 160 oz-in. (with...

Read More »
Brushless Motor survives hostile environments.
DC Motors

Brushless Motor survives hostile environments.

Dustproof Series brushless motor and resolver forms single component that completely locks out contamination, making unit suitable for hostile environments. Drive electronics can be removed, allowing motor to be controlled via RS232 communication. When combined with drive system, motors are suitable for closed-loop motion control applications. Motors are available in frame sizes from 3.25 to 7.5...

Read More »
Motor and Spindle operates at 20,000 to 80,000 rpm.
DC Motors

Motor and Spindle operates at 20,000 to 80,000 rpm.

Astro-E 800 is available with choice of two spindles: NR-3080 and NRA-5080. NR-3080 features ceramic bearing suitable for standard machining, while NRA-5080 lubrication-free spindle is designed with air bearing for light-duty machining. Through use of brushless DC motor, Astro-E 800 (30 mm OD) achieves power levels of up to 250 W. Its air cooling system prevents heat generation of motor and...

Read More »
DC Motors have skewed armatures to reduce cogging.
DC Motors

DC Motors have skewed armatures to reduce cogging.

LO-COG Series 8690(TM) 26mm brush-commutated motors are available in lengths of 1.798, 1.923, and 2.173 in., and provide continuous torque output up to 3.17 oz-in, peak torque up to 20 oz-in, and speeds up to 9,000 rpm. They have two-pole permanent magnet stators and diamond-turned commutators for maximum brush life. Options include optical encoders, custom cables, shaft modifications,...

Read More »
Drum Motor meets MHSA requirements.
DC Motors

Drum Motor meets MHSA requirements.

Explosion proof 30 hp motor provides safe operation when driving belt conveyors in applications that have potential for fire or explosion, such as mining, feed and grain, sugar mills, and fertilizer plants. Low-profile, 12.5 in. dia motor has heavy-duty bolts; secondary o-ring seal for complete hermetic sealing; standard face width of 51 in.; and cast iron shell, shaft, and end cap. Drum speed is...

Read More »
DC Motor meets global OEM needs.
DC Motors

DC Motor meets global OEM needs.

Reliance C500/GS315 provides flexibility to meet either NEMA or IEC dimensional requirements. Four-pole configuration in square, laminated frame improves commutation and heat dissipation. Cast-iron end brackets, with integral mounting feet, put load-carrying members in same vertical plane to eliminate vibration. Motor is available through 800 hp and suits metal, paper, petrochemical, converting,...

Read More »

All Topics