DC Motors

Brushless DC Motor produces 44 oz-in. torque at 5,500 rpm.
DC Motors

Brushless DC Motor produces 44 oz-in. torque at 5,500 rpm.

Model 000-0229 measures 2 in. OD x 1.25 in. long. Stator is molded using encapsulation process, which protects windings from handling damage while facilitating heat dissipation. Rotor is inherently balanced by ring-magnet construction and can be magnetized in variety of pole configurations to optimize torque output with minimal cogging torque.

Read More »
DC Motors/Gearmotors feature 7-slot skewed armatures.
DC Motors

DC Motors/Gearmotors feature 7-slot skewed armatures.

LO-COG® Series 8000 brush-commutated DC motors and gearmotors minimize magnetic cogging, promoting smooth, quiet operation. Motors come in 3 lengths and achieve peak torques up to 16.4 oz-in. and speeds to 10,650 rpm. Series GM8000 gearmotors are offered in 3 lengths with 11 ratios from 6.3:1 to 1803.6:1. They achieve peak torques to 100 oz-in. standard or 160 oz-in. with high-torque...

Read More »
DC Motors

Motor Set allows performance comparisons.

Set of 4 same-size motors, measuring 80 mm OD by 35 mm stack length, includes 3-phase ac induction motor, 3-phase brushless PM synchronous motor, 3-phase switched reluctance motor, and 3-phase synchronous reluctance motor. Each is housed in aluminum die-cast frame with common mounting bracket. Optical encoder is provided for commutation events. Continuous output power ranges from 100-250 W...

Read More »
Brushless DC Motor is suited for machine tool spindles.
DC Motors

Brushless DC Motor is suited for machine tool spindles.

Utilizing voltage of 370 V, 21,000 rpm motor is vibration-free due to its dual plane rotor balancing. Motor design features oversize front and rear bearings and secondary, internally-independent, Hall device tachometer arrangement. Motor measures 7 in. long with 4.875 in. dia and produces up to 14.2 lb-in. of torque at 21,000 rpm; slower speeds yield up to 15 lbs-in. of torque. Product is suited...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
Brushless DC Motor is corrosion-resistant.
DC Motors

Brushless DC Motor is corrosion-resistant.

With OD of 3.25 in. and length of 2.8 in., low voltage motor has power efficiency of 90% and is encased within sealed, stainless steel housing. At its design voltage of 24 Vdc, motor supplies 125 oz-in. of peak torque at stall and no load speed of 6,000 rpm. It is suited for harsh environments, and its magnetic design uses high grade bearings to maximize efficiency for long life in battery...

Read More »
DC Brush Motor reaches speeds of 13,000 rpm.
DC Motors

DC Brush Motor reaches speeds of 13,000 rpm.

Thermally rated for operation at up to 130°C, TG3300-63 Series utilizes electromotive coil technology with multiple precision-machined copper sheets that eliminate eddy currents and hysteresis. Product delivers max continuous torque of 85 oz-in. at 7,850 rpm using input voltage of 24 Vdc and 23 A to motor. Voltage operating range is 0-36 Vdc, armature inductance measures 4 Â-µH, and...

Read More »
Brushless DC Servomotor achieves speeds to 10,000 rpm.
DC Motors

Brushless DC Servomotor achieves speeds to 10,000 rpm.

NEMA size 23 BLDCmotor(TM), available in 3 stack lengths, is compatible with all 3-phase brushless DC amplifiers. It achieves speeds to 10,000 rpm with continuous torque rated up to 53 oz-in. and power output up to 150 W. Winding options include rated voltages from 12-160 Vdc. Features include permanently lubricated ball bearings, totally enclosed motor housing, and dynamically balanced rotors.

Read More »
DC Brush Motors range from 2.4-240 V and 1.0-400 W.
DC Motors

DC Brush Motors range from 2.4-240 V and 1.0-400 W.

Series Y permanent magnet, DC brush motors are offered in frame sizes from 19-100 mm with torque ranging from 0.1-144 oz in. They can be tailored to suit specific application with modifications to windings, shafts, and motor casing. Gear heads are available for all models and motors can be sealed if necessary. Applications include commercial products, pumps, and HVAC.

Read More »
Brushless DC Motors and Gearmotors have slotless design.
DC Motors

Brushless DC Motors and Gearmotors have slotless design.

ELCOM SL® 3-phase, 4-pole brushless DC servo motors and gearmotors utilize design that eliminates magnetic cogging. Magnetic air gap minimizes viscous torque losses, while winding heat transfer is provided for thermal efficiency and transient load capacity. Products are available in 3 frame sizes with rotor construction that allows rotational standard speeds up to 8,000 rpm. Modular design...

Read More »
Brushless Motor provides high speed in miniature package.
DC Motors

Brushless Motor provides high speed in miniature package.

Electronically commutated model EC 16 offers minimized electrical noise and utilizes high-energy neodymium magnets. Motors are available in 3 versions: with hall sensors, sensorless, or with integrated electronics. Weighing 2 oz, motor has 0.63 in. dia and measures 2.2 in. long, not including shaft or cables. Continuous output power is 40 W, while max speed is 60,000 rpm. Max continuous torque is...

Read More »

All Topics