DC Motors

Brushless DC Motor has outside rotor.
DC Motors

Brushless DC Motor has outside rotor.

Suited for polygon scanners and blowers requiring stable speed, compact outer rotor brushless dc motor has low-profile 1.5 x 1.2 in. design that produces over 3 oz-in. continuous torque and is capable of speeds greater than 20,000 rpm. Product is optimized for low cogging torque, and design provides direct coupling interface in many applications. Rotor cup is 2-plane balanced for minimal noise...

Read More »
DC Motors

DC Gear Motor accepts any 12 Vdc power source.

Measuring 2.8 in. dia x 6 in. long, Model MMP.PDSF80-12V.180 features 80 mm square gearbox. Output shaft is 10 mm dia and is provided with square shaft key and keyway. Mounting is accomplished with 4 face-mounted threaded screws, 68 mm apart. Equipped with 180:1 gear ratio, motor is rated for 70 lb-in. of continuous torque at 3.9 A of current. Options include integral optical encoders, failsafe...

Read More »
DC Motors

DC Servomotor offers 280 oz-in. peak torque.

Accepting 12 Vdc, Model MMP-C21.230B-12V measures 2.14 in. dia x 4.8 in. long and has dual output shafts of 0.375 in. dia. Mounting is accomplished with 4 face mount, No. 6-32 threaded holes, equally spaced on 1.531 in. dia BC. Rated for 40 oz-in. of continuous torque at 2,500 rpm, motor requires just 7.5 A at 12 Vdc to generate full load output torque. Optical encoders, failsafe brakes, analog...

Read More »
Brushless Motors utilize neodymium magnets.
DC Motors

Brushless Motors utilize neodymium magnets.

Electronically commutated, Maxon EC-max Motors include Hall effect sensors, which provide feedback to control electronics. By assembling motor with coils outside rotor, heat dissipation and high overload capability is attained. Motors have stainless steel housing and vary in diameter from 16-40 mm with lengths from 24-88 mm. Continuous output power is 5-120 W, while maximum speed is 20,000 rpm....

Read More »
DC Motors

DC Servo Motor offers 40 oz-in. continuous torque.

Accepting 24 Vdc, Model MMP-C21.230B-24V measures 2.14 in. dia x 4.8 in. long and has dual output shafts of 0.375 in. dia. Capable of delivering nearly 150 W of continuous output power at 5,000 rpm, unit requires 7.5 A at 24 Vdc to generate 1/5 hp continuous rating. Mounting is accomplished with 4 face-mount No. 6-32 threaded holes, equally spaced on 1.531 in. dia BC. Options include optical...

Read More »
Brushless DC Servo Motors feature slotless stator design.
DC Motors

Brushless DC Servo Motors feature slotless stator design.

PITTMAN® ELCOM SL® Motors are available in 3 frame sizes with 4-pole rotors and neodymium magnets. They achieve speeds up to 8,000 rpm and peak torques from 13.3-195 oz in., depending on model. Offering hardened stainless steel shafts, negligible magnetic cogging, and large magnetic air gap, modular motors are suited for data storage, medical/biotech, semiconductor, automation,...

Read More »
Brushless DC Motor provides low voltage operation.
DC Motors

Brushless DC Motor provides low voltage operation.

With operating voltage of 12 V, Model 000-0222 delivers 25 oz-in. continuously or in excess of 80 oz-in. peak torque. Measuring 2.25 in. dia x 2.23 in. long, it utilizes cast end bell and front NEMA-23 style plate mount. Motor is intended for reciprocating load requirements and is suited for blower, pump, and industrial process applications. It is configured for Hall-effect sensors, but can be...

Read More »
DC Micro Motors suit high-volume applications.
DC Motors

DC Micro Motors suit high-volume applications.

Featuring precise step angle, Stepper Motors range in size from 6-42 mm dia. Vibrator Motors range from 3.6-6 mm diameter, while Brush Motors range from 4-34 mm, and Brushless Motors range from 19-60 mm diameter. With SMD mounting and wide range of connection choices, motors are suited for camera lens movement, robotics, cell phones, gaming, biometric scanning, dispensing equipment, CD-DVD...

Read More »
Brushless DC Motor is suited for portable applications.
DC Motors

Brushless DC Motor is suited for portable applications.

Compact, low-inertia, 12 V, 2-wire motor is available with single- and double-ended shaft configurations. Designed to sustain applications where high-vibration loads are present, motor measures 31 mm in dia x 62 mm long and produces up to 20 W. Electrical and mechanical options include windings for specific power requirements and custom mounting configurations.

Read More »
Mobile DC Motors suit battery-powered HVAC applications.
DC Motors

Mobile DC Motors suit battery-powered HVAC applications.

PJ and PS series 3 in. dia brush DC motors utilize brush card assembly that improves brush heat dissipation and reduces audible brush noise. They integrate electric noise reduction circuitry and circuit breaker directly within motor housing. PJ design is tube-shell motor with cast end bells, while PS version employs stamped-steel shell. Options include RFI/EMI suppression device that reduces DC...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers