DC Motors

DC Motors

Linear Synchronous Motor suits material handling industries.

Meter-long QuickStick(TM) 100 Linear Synchronous Motor (LSM) modules independently control up to 5 small vehicles and come with embedded position sensors and control software. Connected end-to-end for any length, modules propel, track, and control pallets by interacting with permanent magnet array on each vehicle. Built-in controls regulate speed, acceleration, direction, and permission to...

Read More »
Brushless PM Motor offers speed range of 0-11,000 rpm.
DC Motors

Brushless PM Motor offers speed range of 0-11,000 rpm.

Featuring 10-pole rotor configuration that utilizes Samarium Cobalt rare earth magnets, Model M3-2.5AF develops 11.2 kW continuously and provides 12 lb-ft torque. Forced air-cooled unit measures 5.00 OD x 8.3 in. long. Electronic controller, Model BDN100A40AC, is comprised of 3-phase brushless servo amplifier with built-in rectifier in 10.6 x 9.2 x 6.3 in. package. Analog input of 0-10 V or...

Read More »
Brushless Fan Motor eliminates current surges.
DC Motors

Brushless Fan Motor eliminates current surges.

Suited for motor vehicle and battery-powered applications, Brushless Fan Motor features integrated controller, neodymium magnet rotor, aluminum housing, and double ball bearings. Offered in 12 and 24 V versions with 2-wire leads, motor offers average efficiency of 80% and can be fitted to many fan assemblies for brush to brushless conversion. It includes reverse polarity protection, current...

Read More »
DC Motors provide continuous torque up to 2 oz-in.
DC Motors

DC Motors provide continuous torque up to 2 oz-in.

Available in lengths of 1.256, 1.556, and 1.901 in. Pittman® Series 6000(TM) 22 mm brush-commutated motors utilize skewed 5-slot armature design and bonded neodymium iron boron magnets. They achieve max peak torques up to 10.2 oz-in. and speeds up to 8,550 rpm. Modular motor design enables customization with cables, shaft-mounted pulleys and gears, ball bearings, windings, optical encoders,...

Read More »
Brushless Motors achieve zero cogging.
DC Motors

Brushless Motors achieve zero cogging.

Frameless, Axial Airgap Series AAG offers smooth sinusoidal torque output versus angle and applies to almost any speed range. Motors can be optimized for 3-phase brushless motor controllers from 5-48 V with speeds from 0.1-20,000 rpm. Axial thickness of 5 mm can be achieved at up to 300 mm diameter. Applications include scanning equipment, inspection machines, and small integrated pumps.

Read More »
Miniature DC Gearmotor features optional encoder.
DC Motors

Miniature DC Gearmotor features optional encoder.

Measuring 0.63 in. OD x 2.46 in. long, Series HG16 integrates miniature DC motor, geartrain, and encoder assembly. Available in 12 models with voltages of 6, 12, and 24 V, units offer gear ratios of 30:1, 60:1, 120:1, and 240:1 and torque from 3.47-6.94 oz-in. No load speeds range from 390 rpm in 30:1 model down to 60 rpm in 240:1 models. Optional encoder allows user to position gearmotor in...

Read More »
Brushless DC Kit Motor features smooth operation.
DC Motors

Brushless DC Kit Motor features smooth operation.

Suited for applications sensitive to torque ripple, model 000308-02 produces cogging torque of no greater than 1 oz-in. at 60 rpm. Smooth running characteristics make unit eligible for use in high-resolution printing, scanning, and positioning applications. Proprietary encapsulation process protects motor windings in harsh environments. Measuring 3.6 x 1.25 in., product has peak torque of 200...

Read More »
Intelligent Brushless Motors provide distributed control.
DC Motors

Intelligent Brushless Motors provide distributed control.

Based on MotionChip(TM) DSP Control Technology, IM23x motors provide motion control solutions for pulse and direction; stand-alone, pre-stored sequences; and multi-axis applications. Motor, power electronics, controller, position sensor, and interface are integrated into one 104-144 x 57 x 57 mm unit with local digital and analog I/O signals. Offered in 3 lengths, motors produce 0.1-0.3 Nm...

Read More »
DC Motors

Gear Motor runs from any 12 V DC source.

Model MMP.TM55-12V.GPK52-029.1 is rated for 2.9 Nm continuous torque at 160 rpm, with 9 Nm peak. Measuring 2.14 in. dia x 7.25 in. long, servo motor features keyed output shaft with 12 mm dia and 25 mm length. Mounting is accomplished with 4 face mount M5 threaded holes, and available options include integral optical encoders, failsafe brakes, analog tachometers, and planetary gear heads.

Read More »
Brush DC Motors feature 7-slot skewed armatures.
DC Motors

Brush DC Motors feature 7-slot skewed armatures.

Pittman® Series 8000 brush-commutated DC motors minimize magnetic cogging at low speeds, which allows smooth and quiet operation. Motors are available in 3 lengths: 2.070, 2.445, and 2.915 in. They can achieve peak torques up to 16.8 oz-in. and speeds up to 10,650 rpm for standard motors at rated voltages. Windings are resin-impregnated for greater reliability. Applications include data...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers