DC Motors

DC Motors

Continental Automotive Systems Develops Modular Components for Economical Hybrid Drives

The concept of a flexible modular system of power electronics is being expanded Surveys show that one in four Germans is considering buying a car with hybrid drive FRANKFURT, Germany and GENEVA, March 6 -- With its modular concept for power electronics, Automotive Systems, a division of automotive supplier Continental AG, creates synergies between hybrid drive systems for different power classes....

Read More »
Driver/Motor Packages support CANopen communications.
DC Motors

Driver/Motor Packages support CANopen communications.

Combining microstepping driver and motion controller with NEMA 17, 23, and 34 brushless dc motors or NEMA 34 and 42 brushless ac motors, CANopen MDrivePlus(TM) packages deliver holding torques from 32 oz-in. for single-stack size 17 to 2,294 oz-in. for double-stack size 42 ac. Up to eight 5-24 V general-purpose I/O lines and optional closed-loop configuration are available. Interface to CANopen...

Read More »
DC Motors

MagneMotion Exhibiting at Passenger Terminal Expo

Acton, Mass. - February 21, 2007 - MagneMotion, a developer and manufacturer of assembly automation, material handling and transportation solutions using electro-magnetic technology, today announced that it will be exhibiting its Linear Synchronous Motor solutions for both Airport Baggage Handling and Automated People Movers at the Passenger Terminal Expo 2007 from March 27-29, 2007 at Fira de...

Read More »
DC Motors

ARM7-Based Motor Control Development Kit from STMicroelectronics Simplifies Vector Drive Design for Cost-Sensitive Applications

GENEVA, Feb. 27 // -- STMicroelectronics (NYSE:STM) today announced a new motor control kit, built around the recently-announced 32-bit STR750 microcontroller, which enables the rapid development of high- performance vector-control applications, using both Permanent Magnet Synchronous Motors (PMSM) and 3-phase AC Induction Motors, for cost-sensitive appliance, industrial and HVAC (heating,...

Read More »
DC Gearmotor develops 124 lb-in. torque at 3.2 rpm.
DC Motors

DC Gearmotor develops 124 lb-in. torque at 3.2 rpm.

Able to accept any 12 Vdc source, Model MMP-TM55-90-12V GPk52-124 has 2.14 in. dia, measures 7.7 in. long, and has keyed output shaft of 12 mm dia x 25 mm long. Mounting is accomplished with 4 face-mount M5 threaded holes. Peak output of reversible gearmotor is 178 lb-in., and it only requires 1.0 A @ 12 Vdc to generate its full load torque. Motor windings for 24, 36, and 90 V are available, and...

Read More »
DC Motors

Hankscraft Offers a Complete Line of High Quality DC Motors

Reedsburg, WI, Nov. 30, 2006... Hankscraft Inc, headquartered in Reedsburg, WI offers a complete line of dc motors including our 3440 dc motor. The 3440 is our most versatile DC gear motor, enclosed in ABC plastic. This motor works well in applications needing a strong, quiet, DC gear motor that draws a low current, so your amperage requirements can be met. With a no load stall torque of 65 in-oz...

Read More »
Pittman Brushless DC 'Micromotors' ...
DC Motors

Pittman Brushless DC 'Micromotors' ...

A new family of PITTMAN® brushless DC servo motors incorporates patented coil-winding geometry in a slotless motor design to deliver more power using less energy. These "micromotors" can perform ideally in medical instruments, dental drills, hand power tools, home appliances, computer hardware, marine pumps, and automotive-related devices, among other applications. All models in the new...

Read More »
DC Motors

Brushless DC Motor suit automation applications.

Utilizing neodymium magnets, electronically commutated EC 16 motors are available in 3 versions: with hall sensors, with integrated electronics, or sensorless. Package is 0.63 in. in diameter x 2.2 in. long, not including shaft or cables, and weighs 2 oz. Specified over -4 to +212°F range, motors offer 40 W continuous output power, 60,000 rpm max speed, and 2.2 oz-in. max continuous torque....

Read More »
Mini DC Gear Motor develops 48 oz-in. torque at 118 rpm.
DC Motors

Mini DC Gear Motor develops 48 oz-in. torque at 118 rpm.

Accepting any 12 Vdc source, 3.4 in. long Model MMP-TM30-12V GP-051 measures 30 mm in diameter and has 16 mm long flatted output shaft with 6 mm diameter. Mounting is accomplished with 4 face mount M3 threaded holes, equally spaced on 24 mm dia BC. Output is rated for 3.0 lb-in. continuous torque at 118 rpm and 8.3 lb-in. peak. Requiring 90 mA at 12 Vdc to generate full load torque, motor is also...

Read More »
DC Motors

Motor Blowers incorporate digital speed control.

Available for 120 and 230 V with 1- and 2-stage fan systems, GEN II INFIN-A-TEK switched-reluctance motor blowers come in 5.7 and 7.2 in. dia tangential bypass models as well as 5.7 in. dia Acustek® low-noise peripheral bypass discharge model and 9.1 in. dia high-suction and high-airflow FLO-TEK(TM) tangential bypass models. Units incorporate multi-phase bearing alignment and air-seal...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics