SMD Micro Motors suit small device vibration applications.
Featuring 3.4 mm profile, BSY Series DC Motors are 11 mm long with typical speed of 14,000 rpm and mechanical noise of 45 dB max. Standard operating voltage is 2.7 Vdc and load current is approximately 65 mA. Intended for applications requiring small footprint on surface mount circuit board, units are suited for mobile phones and consumer medical devices as well as medical and other applications.
Read More »
Brushless Motors suit respiratory support equipment.
Weighing 94 g and providing 50 W of power at up to 73,000 rpm, 22 mm Brushless Motors operate at 25°C with 55 dB noise level, and provide inertia as low as 2.3 x 10-7 kmg-². Internal design cuts motor length and minimizes vibration. Featuring slotless technology, motors help maximize comfort of patients using Bi-Level respirators.
Read More »
Brushless DC Motors provide continuous torque to 40 oz-in.
ELCOM ST® Series N2300 slotted brushless DC motors incorporate internal Hall sensor feedback for linear speed-torque characteristics, and variable speed control with control electronics. Motor features 6-slot lamination design and mount configuration that is consistent with NEMA 23 standards. At 2.3 in. in diameter, motors are available in standard stack lengths of -½,1,1-½, and 2 in.,...
Read More »Custom Submersible Motor Gearbox Assembly from Empire Magnetics Make Waves in O by Cirque du Soleil
ROHNERT PARK, CA - Empire Magnetics, a leading supplier of specialty motor products, motion control systems and support services, is often called on to develop custom motion control solutions for unique applications and environments where standard motion control components are simply unsuitable. One of Empire's custom motor gearbox assemblies has even made its way into show business as an...
Read More »
3 Steps to Maximize Your Company's Cash Flow
This white paper provides an overview into maximizing cash flow for your company.
Read More »
Slotted Brushless DC Servomotors suit limited-space areas.
Available in 1.5, 2, and 2.5 in. lengths, 1.3 in. dia PITTMAN® Series 1300 motors achieve model-dependent peak torques from 10-57 oz-in. and continuous torques from 3.5-8.5 oz-in. Rotor construction allows rotational speeds to 8,000 rpm, and 3 Hall sensors provide rotor position feedback for electronic commutation. Supplied in aluminum housing, products also feature 3-phase stator with 6-slot...
Read More »
DC Micromotors include graphite commutation.
Featuring external motor diameter of 22 mm and length of 32 mm, Series M2232U provides stall torque of 25.62 mNm and speeds up to 10,000 rpm. Low-cog rotation is achieved through skewed laminations and tapered permanent magnet system. Available with 6, 12, and 24 V windings, Series M2232U GS has cantilevered brush system, while Series M2232U CS has cartridge brush system. Plastic and metal...
Read More »Brushless DC Motors operately smoothly at high speeds.
Available in 1.61, 2.40, 3.19, and 3.94 in. stack lengths, NEMA 17 Brushless DC (BLDC) motors suit applications requiring high speed and high dynamic torque. They offer quiet and smooth operation, regardless of speed range, and have optimal performance speed range of 300-3,000 rpm. Depending on stack length, motors are able to produce up to 106 oz-in. of peak torque. Areas of use include those...
Read More »
Brushless Motors are suited for respirator applications.
Weighing 33 g, 16 mm Brushless Motors provide 50 W of power at up to 60,000 rpm from 16 mm housing. Motion control solutions operate at 39 dB and are designed to produce minimal vibration, promoting patient comfort with concern to compact respiratory support equipment.
Read More »New Parker MPN Motors Replace Rockwell N-Series
ROHNERT PARK, CA (October 19, 2006) - Parker's Electromechanical Automation Division, a leading supplier of motion control technology, announces the release of its MPN series of brushless servo motors. The MPN motors are designed to replace the now-obsolete N-Series motors recently discontinued by Rockwell Automation/Allen-Bradley. The MPN offers more torque per frame size than the existing...
Read More »
Speed Control Package complies with RoHS regulations.
Comprised of brushless dc motor and 24 Vdc compact driver board, BLH speed control package includes 15/30/50/100 W output models with ±0.5% speed regulation accuracy. Motor can be operated at speeds from 100-3,000 rpm, and available gearhead types include parallel shaft and hollow shaft flat versions. While 15 W parallel shaft gearhead with BLH motor cannot be separated, packages for 30, 50, and...
Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.
Read More »
