DC Motors

Brushless DC Servo Motor is NEMA 34 rated.
DC Motors

Brushless DC Servo Motor is NEMA 34 rated.

Available in 3 different lengths with rated power of 0.22 hp at 1,750 rpm and 1.0 hp at 3,450 rpm, MCG® MA34000 Series has integral single quadrant drive for 3-phase electronic commutation. It features pre-wired drive and feedback connections for low EMI and low audible noise, Hall sensors for closed loop velocity control, and integral electronics, which can be tailored for specific...

Read More »
DC Motors offer 150 mNm maximum continuous torque.
DC Motors

DC Motors offer 150 mNm maximum continuous torque.

Customizable for use with range of gearboxes and encoders, 35GLT multi-layer coil brush dc motors are available with 5 winding types in voltage range of 24-90 V. Offered in 35 mm housing, RoHS-compliant units weigh just 360 g, have low ambient heat dissipation, and can also be customized with fiber wrap insulation. They are suited for use in food processing, door automation, feed and assembly...

Read More »
Brushless DC Motor offers up to 100 oz-in. continuous torque.
DC Motors

Brushless DC Motor offers up to 100 oz-in. continuous torque.

Featuring digital PWM interface for speed control, INTEGRAmotor(TM) 34B/FV offers Â-¼ hp (187 W) and operates from regulated 24 Vdc power supply. Integrated control accepts inputs from external motion controller or PLC, while enclosed 1,024 ppr, 2-channel optical encoder provides closed loop feedback to external controller. IP44 rated, 34B-frame unit can be combined with range of parallel...

Read More »
High-Torque Motors offer positioning precision.
DC Motors

High-Torque Motors offer positioning precision.

Available in 2 sizes with self-cooled or externally-cooled options, 8LT series 3-phase synchronous motors can handle demanding applications. They feature compact design that eliminates need for angular gears in many cases, and can be integrated in wide range of applications. Equipped with embedded parameter chip for identification of all device data, motors have supply voltage of 400-480 Vac,...

Read More »
DC Motors

Brushed DC Motor delivers 250 W and reaches 90% efficiency.

Constructed with ironless rotor and 4-pole structure of Neodymium permanent magnets, mechanically commutated RE65 works detent-free and has minimal rotor inertia. Preloaded ball bearings support low-vibration and low-noise operation, and nominal voltage is in 18-70 V range. Depending on winding variation, 65 mm dia x 130 mm long cylindrical drive delivers nominal torque of 0.5-0.9 Nm at nominal...

Read More »
DC Motors

Motor and Drive offer efficiency better than NEMA Premium.

With outputs from 20-200 hp, WMagnet Motor/Drive Packages offer efficiencies of 95-97%. Motors use rare earth permanent magnets in rotor to limit temperature rise during operation. Utilizing vector control technology algorithm, CFW-09 drive enables control without use of encoder/position sensor. As synchronous motor, WMagnet cannot be started directly from power supply because accurate...

Read More »
Motor Encoder Assembly offers extremely fine positioning.
DC Motors

Motor Encoder Assembly offers extremely fine positioning.

Featuring large diameter clear aperture with high-resolution encoder that supports up to 0.02 arc-sec, Integrated Motor Encoder Assembly is suited for specialty machine applications where high acceleration point-to-point motion is required. Assembly incorporates ABEC7 class precision ball bearings, hollow shaft configuration, and hall-based commutation scheme for seamless connectivity with...

Read More »
Brushless DC Motor suits portable applications.
DC Motors

Brushless DC Motor suits portable applications.

Supplied in 2.626 in. dia x 2.48 long package that weighs 30 oz, TG 2340 delivers 500 W (0.68 hp) continuous shaft output power at 48 V and 600 oz-in. peak torque. Max motor efficiency is 90%, and peak system efficiency using trapezoidal controller is 85%. Due to rigid ironless core rotor that eliminates hysteresis losses and cogging torque, motor offers smooth acceleration. Airflow over interior...

Read More »
Brushless DC Motors incorporate unique coil-winding geometry.
DC Motors

Brushless DC Motors incorporate unique coil-winding geometry.

Available in 5 series (Size 05, 08, 11, 14, and 18), Pittman® micromotors incorporate Parallex coil-winding geometry in slotless motor design to optimize power delivery while minimizing power consumption. They are offered in sizes from .500-1.750 in. and employ NdFeB rare earth magnets, precision ABEC bearings, and balanced rotors. Supplied in corrosion-resistant, stainless steel housing,...

Read More »
Bodine Electric Standard Products Reduce Development Time and Cost
DC Motors

Bodine Electric Standard Products Reduce Development Time and Cost

CHICAGO, IL (May, 2008) - Bodine Electric Company now offers over 1,000 standard models of AC induction, permanent magnet DC, and brushless DC fractional horsepower [FHP] gearmotors, motors, controls, and motor accessories. The range of standard products allows design engineers to evaluate quickly which technology best meets their application needs. Original Equipment Manufacturers (OEMs) can...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers