DC Motors

DC Motors

Hitachi Awarded Order from Eaton Corporation for Commercial Vehicle Hybrid System

Tokyo, October 20, 2008 - Hitachi, Ltd. (NYSE: HIT/ TSE: 6501) and Hitachi Vehicle Energy, Ltd., which manufactures lithium-ion batteries for hybrid electric vehicles (HEV) and other uses, today announced that they have been awarded an order from U.S.-based Eaton Corporation (NYSE:ETN) to supply motors, inverters, lithium-ion batteries and other components for Eaton's hybrid power systems to be...

Read More »
DC Gear Motor accepts any 12 Vdc source.
DC Motors

DC Gear Motor accepts any 12 Vdc source.

Measuring 2.14 in. in dia and 7.75 in. long, Model No. MMP-TM55-24-12V GP52-079 has output rated for 80 in.-lb continuous torque, at 25 rpm, and 443 in.-lb peak. Weighing 4 lb, it has keyed output shaft of 12 mm dia and 25 mm long. Reversible unit requires just 3.6 A at 12 Vdc to generate its Full Load Torque. Available with motor windings for 24, 36, 48, 60, and 90 V, IP54 protection rated motor...

Read More »
DC Motors

Compact Brush Motor weighs 12 oz.

Designed for industrial, professional, and portable tools, TGB1612 brush motor delivers 110 oz-in. peak torque and 170 W continuous power. It features smooth, controllable power due to its zero cogging and hysteresis torque, while low inductance coil allows current to respond quickly to sudden voltage swings. Unit measures 1.5 in. dia and 2.61 in. long.

Read More »
DC Motors

Luminary Micro Ships 12,000 Kits in Just 24 Months

AUSTIN, TX, USA - October 29, 2008 - Luminary Micro (www.LuminaryMicro.com) announced today that the company has shipped more than 12,000 of the company's award-winning Stellaris® evaluation and reference design kits in just the past 24 months, an unprecedented adoption rate for new microcontroller technology. The company's kits are shipping to customers in over 64 different countries and...

Read More »
An Introduction to Plastic Injection Molding
Sponsored

An Introduction to Plastic Injection Molding

We developed this eBook with designers, engineers and purchasing specialists in mind. It is written to provide a basic understanding of plastic injection molding presses, processes and costs. Our goal is to make our customers more knowledgeable about what goes into making a plastic part.

Read More »
Brush DC Servo Motors feature skewed 5-slot armature design.
DC Motors

Brush DC Servo Motors feature skewed 5-slot armature design.

Equipped with bonded neodymium iron boron magnets, 22 mm diameter Series 6000 comes in lengths of 1.901, 1.556, and 1.256 in. with continuous torque of 2, 1.3, and 0.80 oz-in., respectively. Depending on model, brush-commutated motors can generate maximum peak torques up to 10.2 oz-in. nominal with no-load speeds to 8,720 rpm. Motors include sintered bronze bearings, 2-pole stators, heavy-gauge...

Read More »
Permanent Magnet Stepper Motors from Astrosyn Available in Low Volumes
DC Motors

Permanent Magnet Stepper Motors from Astrosyn Available in Low Volumes

A wide range of high performance permanent magnet stepper motors has been introduced by motion control specialists Astrosyn International Technology. The use of PM stepper motors offers manufacturers the advantages of simple construction, high thrust and low price. However, unlike with most permanent magnet devices, minimum order quantities from Astrosyn can be as low as a few hundred pieces....

Read More »
Linear Synchronous Motors suit large machining centers.
DC Motors

Linear Synchronous Motors suit large machining centers.

Offering peak forces up to 13,000 N with dead weight of 45 g, IDAM L2U Series compensates for any magnetic forces generated between motors and magnets. By using iron-core linear ac synchronous motor with 2 symmetrically opposed secondary parts, units maintain accuracy and minimize friction-induced heat generation. Reduced iron content in movable primary component further minimizes mass in 3-phase...

Read More »
DC Motors

Brush Motor targets industrial handheld and portable tools.

Measuring 1.7 in. dia x 3.3 in. long, Model TGB1710 delivers 160 oz in. peak torque and 183 W continuous power, yet weighs 22 oz. Ruggedized brush design withstands vibration of portable tools, while low-inductance architecture of motor coil extends brush life. Motor also features smooth, controllable power due to zero cogging and hysteresis torque.

Read More »
2008 Golden Mousetrap Awards Recognize Groschopp's Motor & Gearmotor Engineering Innovation
DC Motors

2008 Golden Mousetrap Awards Recognize Groschopp's Motor & Gearmotor Engineering Innovation

October 22, 2008 Three Product Designs Selected as Best Product Finalists" in Motors & Motion Control For more than 20 years, Design News has recognized engineering innovation and creativity. Groschopp is pleased to have scored a hat-trick in this year's competition in the Motors & Motion Control Category, achieving Finalist status for all three product entries: o Brushless DC Motor with Flux...

Read More »
Integrated Gear Motors utilize Neodymium magnets.
DC Motors

Integrated Gear Motors utilize Neodymium magnets.

Designed to interface to sinusoidal drives from 12-320 Vdc, Brushless PM Servo Gear Motors provide gear motor torque values from 26.5-224 lb-in. Maximum gear motor momentary torque is 198 lb-in. for NEMA size 23 and 633 lb-in. for NEMA size 34 motors. Available in IP65 or IP67 configurations, units come with single, dual, and 3-stage geartrains in 10 gear ratios from 16:1-1,012:1. Applications...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers