DC Motors

DC Motors

Brushless DC Gear Motor delivers 150 W power.

Providing output torque up to 120 Nm, 3-stage Model 80199701 handles high side loads with 1,000 N radial and 200 N axial. Standard motor package features IP20 protection rating that can be upgraded to IP54. Measuring 81 mm dia x 229 mm long, motor incorporates shaft extension on rear, allowing for encoder or brake. Unit can operate with voltages from 6-75 Vdc, uses hall sensors and 8-wire...

Read More »
Brushless 40 mm Motor features high-density design.
DC Motors

Brushless 40 mm Motor features high-density design.

Constructed with neodymium permanent magnet, stainless steel housing, and welded flanges, EC 40 offers flat speed/torque gradient of ~3.6 rpm/mNm, mechanical time constant of 2.1 msec, permissible speed of 18,000 rpm, and efficiency rating of 89%. Ironless winding promotes quiet running and elevated stall torque, and design works with variety of components. Applications include industrial use,...

Read More »
Transtecno Releases Compact, Powerful Right Angle Worm Gearmotor Line
DC Motors

Transtecno Releases Compact, Powerful Right Angle Worm Gearmotor Line

PMDC gearmotors cover a large range of output speeds and torques Alton, Iowa - Transtecno Group based in Bologna, Italy has released a new line of permanent magnet right angle worm gearmotors for numerous applications. The Transtecno line of PMDC right angle worm gearmotors has 5 motor sizes available in 12v & 24v, coupled to a possible 12 different gearbox ratios, along with 5 different gearbox...

Read More »
DC Motors

High-Power PM Motors are suited for commercial automation.

Utilizing ferrite magnets to maximize power density, 400 Series of 63 mm permanent magnet brushed motors house magnet circuits in 12-slot armature design. Magnet edges are designed to minimize cogging torque as well as vibration and noise, while 2 ball bearings cut down friction loss. Included power cables allow for radial and axial exit from units. Motors also have end covers that support...

Read More »
New Brushless DC Motors and Drives
DC Motors

New Brushless DC Motors and Drives

PCC has just developed and released a completely new drive/gearmotor package for its auger based, continuous loss-in-weight feeders and blenders. The X-Series blenders and AFG/PF feeders previously incorporated a PWM drive and a permanent magnet DC gearmotor to rotate the metering auger. PCC started the development by designing a new generation of motor drives that would control both the older...

Read More »
Generator tolerates high shock and vibration.
DC Motors

Generator tolerates high shock and vibration.

Measuring 1.8 in. diameter and 2.1 in. axial length, Model DIH18-21-BBNA provides continuous output of 40 Vdc at speeds of 11,000 rpm. Unit incorporates bearing suspension that absorbs vibration and shock, as well as one-piece housing that eliminates vulnerable attachment points. Motor is used as generator to supply power to remote brake health monitoring system and can withstand high shock and...

Read More »
Linear Shaft Motor achieves sub micron resolution.
DC Motors

Linear Shaft Motor achieves sub micron resolution.

Designed for ultra high-precision market, Linear Shaft Motor features ironless construction and cylindrical design that uses 100% of magnetic flux. All available magnetic flux cuts coils at 90° angle. Because it has no cogging issues and does not produce Eddy currents, motor does not dump heat into work point, which enables it to achieve sub micron motion profiles. Lack of inherent airflow...

Read More »
Testing of Electric Motors for Automotive Applications
DC Motors

Testing of Electric Motors for Automotive Applications

For its test benches used in both laboratory and in production, Unus International chose the turnkey MEROBEL solution UNUS International manufactures DC motors 12 - 24 - 48 V mainly used as servomechanism equipments for the automotive and the industrial automation industries. Created in the 70s in Padova, UNUS which was moved in 1995 in Rival di Pianiga (Venice), employs currently about 60...

Read More »
DC Electric Micro Gearmotor accommodates space-restricted jobs.
DC Motors

DC Electric Micro Gearmotor accommodates space-restricted jobs.

Suited continuous, reversing, or intermittent operation applications, Intecno micro gearmotors are available in 35, 42, 52, 65, and 80 mm dia; have 12 or 24 Vdc power supply; and feature power ratings from 8-140 W (intermittent duty). Motors can be installed in any mounting position and offer coaxial arrangement of input and output. Lubricated with grease, maintenance-free planetary gearboxes are...

Read More »
Brushless DC Micro Gearmotor comes with/without control driver.
DC Motors

Brushless DC Micro Gearmotor comes with/without control driver.

Available in 3 sizes, 24 Vdc BLDC series is equipped with Hall Sensors, offers torque from .425-3.80 lb-in., and can be supplied with integrated control (IE version) or external drive control. Planetary gearboxes, lubricated with grease, offer various reduction ratios, with 72 total from 3.7:1 (single-stage) to 2,076:1 (4-stage). Right angle worm gearboxes are offered in CM26 and CM30 sizes,...

Read More »

All Topics